Bagian geser baja

HOMMEL UBK

Tahun pembuatan: 2020, Kondisi: baru, 1000 l/h Itjdscx Smbopfx Anken Stainless steel frame on 4 adjustable feet Minimum/maximum level sensor in the pressure tank Stainless steel pressure vessel The product is injected into the tank via a multi-nozzle head; Product pump: Check valve at product inlet Sight glass at product inlet CO2 pressure regulating valve for mounting on the CO2 bottle Sight glass in the pressure vessel Max. pressure: 6 bar incl. electronic control incl. pressure boosting pump

Kondisi: baru, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1.2 t Dimensions (LxWxH): Length 2400 mm, Width/Depth 2160 mm, Height 2300 mm, Weight 1200 kg Spindle speed: 60–4200 rpm - Solid construction made from high-quality Meehanite cast iron - High concentricity accuracy thanks to tapered roller bearings; measured runout in the quill less than 0.01 mm - Infinitely variable speed control - Forward/reverse for thread cutting - X and Z axes with adjustable 55° dovetail guides - Y-axis with flat guideways - Drilling/milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step 0.04–0.15 mm/rev - Motorized feed in X, Y, and Z axes - Precision micro-feed - Milling spindle with precision bearing - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant channel - Central lubrication - Height-adjustable safety screen with microswitch for maximum operator protection against flying chips and parts - Large, heavy-duty cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity 300 kg - Large travel distances: X / Y / Z axis: 740 mm / 330 mm / 320 mm Dimensions and Weights Length: 2400 mm Width/Depth: 2160 mm Height: 2300 mm Weight: 1200 kg Drilling/Milling Capacity Max. face mill size: 76 mm Max. shank-type end mill: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical Connection Total connected load: 3 kW Supply voltage: 400 V Phases: 3 Ph Power type: AC Mains frequency: 50 Hz Milling Table (Horizontal) Length: 254 mm Width: 1370 mm Vertical spindle to milling table max.: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal Spindle Overhang: 0–420 mm Coolant System Coolant pump drive power: 90 W Motors Vertical spindle power (standard operation): 2.2 kW Itjdpfed H Hhzox Ankjn Standards and Approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical Spindle Overhang: 0–420 mm Spindle taper: ISO 40 DIN 2080 Speed range: 60–4200 rpm Number of speed ranges: 2 Speed control: mechanical, stepless Swivel range, milling head X–Y plane: 90° Swivel range, milling head Z–X plane: 45° Quill diameter: 86 mm Quill travel: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head vertical travel (Z-axis): 470 mm PU: 1

Kondisi: baru, Turning diameter: 400 mm Turning length: 1000 mm Speed range: 70 - 2,000 rpm Weight approx.: 500 kg Description: - Lead and feed screw lathe featuring a robust design and straightforward operation. TM 4010D with digital position display DPA 21 - Machine bed and base made from heavily ribbed special cast iron - High rigidity of headstock housing due to heavily ribbed GG25 cast iron - Hardened and ground face spindle ensures outstanding accuracy and durability - High material removal during roughing operations allows for fine surface finishes and tight tolerances - Wide range of threads and feeds without having to change gears in the gear train - Bed guideways hardened and precision-ground - Precisely running main spindle mounted in precision ball bearings - Mechanical longitudinal feed disengagement on the carriage with four adjustable eccentrics - Electronic main spindle brake - All control elements (electrical) are easily accessible from a central location - 4-position longitudinal stop - Quick change tool post SWH 3 TM 4010D – Digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed, and glare-free - Increased working accuracy - Error rate is reduced - X, Y, Z0, Z axes with 8-digit display each - Glass scales Equipment details: Feed gearbox – all gears made of steel - hardened and ground - Shafts run on needle bearings - all components lubricated in oil bath Apron – entirely sealed housing - With safety device against simultaneous operation of threading and feed mechanism Tailstock – hardened and ground quill - generously dimensioned - quill with scale Prismatic bed – heavily ribbed cast iron - high rigidity Machine lamp – complete illumination of work area Main spindle – precision running - high load capacity - mounted in precision taper roller bearings Machine base – pre-assembled Tool compartment Operator panel – user-friendly membrane keypad - machine lamp - coolant pump - direct drive - two-stage motor switch - emergency stop pushbutton Coolant tank – removable - level indicator - easy and complete drainage and cleaning Control cabinet – clearly arranged - 24V DC power supply - all contactors and relays from Schneider or Siemens Chip tray – foldable - easy chip removal Scope of delivery: - 3-jaw chuck 200 mm - Operating tools - Adapter MK 6-MK 4 - Change gear set Technical Data: Length: 1,950 mm Width/Depth: 820 mm Height: 1,530 mm Max. length: Max. width/depth: Max. height: Weight: 500 kg Drive motor power: 2.2 kW Total connected load: 2.3 kW Total current consumption: Electrical voltage: 400 V Phases: 3 Current type: ~ Network frequency: 50 Hz Spindle mount: Camlock DIN ISO 702-2 No. 5 Spindle bore/bar passage diameter: Ø 53 mm Iedpfx Anjd Eaukekotn Chuck diameter: Chuck actuation: Centre height: 200 mm Centre distance: 1,000 mm Swing over bed: 400 mm (continues if required)

Kondisi: baru, HR300 Rogi mini rolling machine Rolling capacity ----- 1 mm Working length ----- 300 mm Isdpfx Aoga Tzbenkotn Roller diameter ----- 30 mm Weight ----- 10 kg

Kondisi: bekas, Decoiler and Straightening Line – Decoiler and Straightening Machine Itodsif Sg Sepfx Ankon Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness (with straightening machine inactive): 6 mm Sheet thickness (with straightening machine active): 2 mm - Very well equipped with excellent feeding aids Total system footprint (L x W): approx. 7,000 x 3,000 mm Total system weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs. Straightening roller diameter: Ø 40 mm Number of pull rollers: 2 pcs. Pull roller diameter: Ø 80 mm Entry/throughfeed height: 1,500 mm - Straightening rollers hardened, ground and hard-chromed, with central support - Pull rollers hardened, ground and hard-chromed, with hydraulic disengagement - Manual adjustment of straightening rollers - Infeed assistance with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable lateral strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pull rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or for processing thicker material, stroke via trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Own weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8,000 kg Coil outer diameter: max. 1,600 mm (with loading saddle) Coil outer diameter: max. 2,000 mm (without loading saddle) Coil turntable diameter: Ø 1,700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of decoiler crown above baseplate: 1,500 mm - Decoiler crown drive via hydraulic motor and gear - Pneumatic overrun brake on decoiler crown TWINFLEX - Hydraulic expansion of decoiler crown, central via wedge slide system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading saddle with 12 t lifting capacity and 300 mm stroke - Decoiler in floor-running frame with motorized cross-travel drive Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Own weight: approx. 5 tons Central Hydraulic Power Unit, free-standing Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Own weight: approx. 800 kg Electrical Cabinet, free-standing - All cable connections via Harting plug connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Own weight: approx. 800 kg

Kondisi: bekas, Tahun pembuatan: 1996, nomor mesin/kendaraan: 90.293/1, Material width: 75 mm Total power requirement: 1.5 kW Itedpfocxxpnjx Ankon Space requirement approx.: 1.90 x 1.15 x 1.25 m

Kondisi: bekas, en-GB_Auf-Abwickelhaspel_HMS_BA_1.5-06-80_1991 Isdpfx Anshx R Etokotn

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2004, Completely overhauled Sheffield D12 with new control system, probe, software, etc. (2017) - Coordinate measuring machine with linear guides (no compressed air required) - Mobile design (transport rollers) - Measuring ranges X / Y / Z = 500 x 900 x 400 mm - Measuring uncertainty according to ISO 10.360 MPE = 4.9 + 4L/1000μm - Pantec Eagle Basic Controller - Optional temperature compensation (new) - Renishaw PH1 probe head, optional PH10T (used or new) Itedpefmkxiofx Ankon - Renishaw TP20 probe (used or new) - Renishaw MCR200 probe changer (optional) - Inspect3D Inca Professional software (version 2017 or newer + options) - HP Workstation W10 computer (as-new condition) The machine can be viewed and demonstrated at any time.

Kondisi: baru, Tahun pembuatan: 2026, Otomat pengeboran dan pemasangan engsel CNC dengan majalah untuk pemrosesan otomatis engsel cangkir dan pelat pemasangan. Ketahanan, umur panjang, dan kemudahan pengoperasian adalah ciri khas mesin bor dan pemasangan otomatis CNC kami. Penjelasan singkat: Itjdpfx Ajdx A U Henksn • Otomat pengeboran dan penekan engsel cangkir CNC untuk kapasitas tinggi • Fleksibilitas melalui kontrol CNC • Unit bor yang kokoh dan tahan lama dari GANNOMAT • Matriks penekan dari baja untuk masa pakai panjang • Pengeboran kayu solid dengan motor standar 1,5 kW • Kontrol keamanan dengan detektor logam (opsional)

Kondisi: bekas, Tahun pembuatan: 1996, nomor mesin/kendaraan: 008037280596, BANDSAW SICAR MODEL TOP 9 - USED Iedpfxjwr Ek Eo Ankstn - Wheel diameter: 900 mm - Year: 1996 - Serial No.: 008037280596