Trailer low loader

HRD NTG Tieflader, ausziehbar, verbreiterbar

Kondisi: bekas, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type: RSD 1500 - 125 Machine no.: 317 / 690 Year of manufacture: approx. 1986 Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram surface: Ø 125 mm Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Predsd Swtajpfx Ab Isd Hydraulic operating pressure: max. 500 bar - Without hydraulic power unit - Ram surface with 4 threaded holes M16 and 20 mm guide slot, centered centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Required space (L x W x H): 700 x 300 x 1450 mm Weight: 1250 kg Good condition

Kondisi: sangat baik (bekas), daya: 150 kW (203,94 hp), jenis bahan bakar: diesel, warna: kuning, Tahun pembuatan: 2012, jam operasional: 4.237 h,

Kondisi: bekas, Tahun pembuatan: 1997, en-001 Pedpsxacd Nsfx Ab Isrd

Tahun pembuatan: 2012, jam operasional: 3.200 h, Kondisi: bekas, Tujuan penggunaan: Konstruksi Silakan hubungi ATS Norway untuk informasi lebih lanjut. Harap cantumkan nomor referensi saat mengajukan pertanyaan: 16748 Podpsv U Sa Hsfx Ab Iord Spesifikasi: - Model tahun 2012 - Sekitar 3200 jam - Terima kasih - Ikuti lebar, kemudian lebar 4 m ditambahkan - Pisau stempel - Sensor pengumpan - Servis dilakukan sendiri - Siap untuk pengiriman Deskripsi: Paver aspal Bomag dengan 3200 jam. Mengerjakan rentang lebar dari 1,8 hingga 4 meter. Siap untuk pengiriman Jam operasi: 3200

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 3.064 h, Tujuan penggunaan: Konstruksi Material yang dapat digunakan: Aspal Nomor seri: 10188210xxxx Silakan hubungi ATS Norway untuk informasi lebih lanjut. Harap cantumkan nomor referensi saat mengajukan permintaan: 20327 Spesifikasi: - Model tahun 2013 - 3064 jam kerja - Mesin Deutz - Pengangkatan dan penurunan hidrolik - Lebar milling 60 cm - Fungsi naik dan turun pada bagian atap - Siap dikirim segera Podswi Rc Ujpfx Ab Ijrd Deskripsi: Kami menawarkan mesin milling aspal Bomag BM600/15 tahun 2013. Menurut pemilik, semua berfungsi dengan baik. Perawatan dilakukan di bengkel kami sendiri. Lebar milling 60 cm. Kesalahan dan kelalaian dapat terjadi. Tersedia untuk pengiriman segera Jam kerja: 3064 Berat kosong: 6800 kg Model: BM600/15

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 11.707 h, Perlengkapan: penggerak semua roda,

Kondisi: baru, EN: Unladen weight: 120,000 kg Load compartment capacity: 160,000 l STANDARD CONDITIONS The plant is designed for the production of 160 t/h road mix with a finished product at an initial moisture content of 4% and 160°C under the following standard conditions: • Aggregate temperature at dryer inlet: 10°C Pjdpfx Abew Hzk De Ierd • Altitude: sea level • Average density of feed aggregates: 1,650 kg/m³ • Heavy fuel oil No. 6 calorific value ≥ 9,200 kCal/kg • Heavy fuel oil No. 4 calorific value ≥ 9,700 kCal/kg • Calorific value for diesel oil ≥ 10,200 kCal/kg • Natural gas calorific value ≥ 7,600 kCal/kg • Temperature increase of hot aggregates: 160 K • Residual moisture content in mix: 0.3% • Max. aggregate size: 40 mm • Screen passing 3 mm: 35% • Material is non-porous and non-hygroscopic with normal shape • Production tolerance level according to environmental and parameter conditions: ±4% COLD AGGREGATE BUNKERS • Four cold aggregate bins made of 5 mm St 37 sheet steel must be provided, each approximately 20 m³ in volume and manufactured separately. • The bins must feature 800 mm high upper extensions made from 6 mm sheet to prevent material overflow. • The bin discharge must be executed with a moving group. • The discharge flow for each bunker must be frequency-controlled (speed-controlled) upon request and adjustable from the computer screen. • The number of bunkers for flowing material must be adjustable by a manual gate, installable on each bin. • If aggregates run out in the bins, a warning system must be present, displaying a warning sign on the computer screen to alert the operator. • A vibrator motor, controlled from the computer screen, must be fitted so that it facilitates material flow and prevents clogging in bins with fine materials. • A conveyor belt system must be installed under each bin to ensure material flow. • Each bin must be equipped with modular grids made from 10x50 mm sheets with 10 mm diameter rods. • Silo loading width: 3,000 x 2,400 mm. • An emergency rope pull-stop system must be provided. • Possible faults in the belts must be displayed on the computer screen. 2. SUB-BUNKER COLD AGGREGATE COLLECTOR BELT • The horizontal belt must convey material taken separately from each bin in a controlled manner to the inclined dryer belt and be capable of delivering material to a plant with a capacity of 160 t/h. • The rubber belt must be 10 mm thick, 800 mm wide, with four layers of canvas and 4 x EP 125 quality. • Belt start/stop control must be operable from the computer screen. For end-of-season material discharge, the belt may run in reverse independently of other units. • The horizontal belt chassis must be manufactured from structural steel, designed for smooth belt operation, and fitted with a belt tension system. • The belt must be equipped with a separation system at each end. • The drive drum must be rubber-coated and set at a 1-degree angle. • For emergencies...