Pusat permesinan - vertikal

HWACHEON VESTA - 1000 + Ind. Device

Kondisi: baik (bekas), Tahun pembuatan: 2010, Mesin memiliki opsi alat hidup dan sumbu Y. Alat potong tidak termasuk. Bagian yang ditunjukkan dengan tangan tidak termasuk. Detail teknis ditampilkan pada gambar. Lajdpfx Alsxpw Nle Ned

Kondisi: baik (bekas), Tahun pembuatan: 2007, die-maschine-befindet-sich-in-sehr-gutem-zustand-promot-belade-u nd-entladestation-im-lieferumfang-ausgeschlossen-div-werkzeug-zub ehoer-von-maschine-vorhanden-technische-daten-von-maschine-siehe- letzte-zwei-bilder Lodpfjxf Iamox Al Nead

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, An aluminium die-casting machine is available. Clamping force: 2,200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking: toggle system, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, casting pressure: 1,990 bar, projected area min./max.: 110 cm²/338 cm², performance: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar spacing: 500 mm/500 mm, mold height min./max.: 250 mm/600 mm, min. mold dimensions X/Y: 296 mm/296 mm. Includes crucible furnace, air blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Lajdpfoucfwpjx Al Nsd

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Take advantage of Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅System Components: ►1 pc – Large, gas-heated powder curing oven ►1 pc – Automatic powder coating booth ►1 pc – Small, electrically heated powder curing oven ►2 pcs – Room-type mono-cyclone manual powder coating booths ►6 pcs – Automatic powder coating guns ►3 pcs – Manual powder coating guns ►1 pc – Automatic powder recovery unit ►6 pcs – Mono-cyclones ►1 pc – Automated control panel ►1 pc – Automated bar movement system with speed control ►2 pcs – Mobile platforms with speed control ►8 pcs – Parking stations ►300 m – Conveyor rail, 1000 kg capacity ►12 pcs – Suspension bars Lodjiivq Uopfx Al Nead Our facility is located at Anhaltstr. 30, 14943 Luckenwalde. Please arrange an appointment to inspect the machinery on site. The system has been in operation for 10 years. As the direct manufacturer, we can make the modifications you require to the machines by mutual agreement. Doesn’t fit your existing installation space? We can adapt the layout accordingly. Please check the system PDF using the link below.

Kondisi: baru, Tahun pembuatan: 2026, CNC drilling and milling machine Kudu with CNC control and tool changer (3-axis) Drilling and milling machine with movable processing unit – the table remains stationary, and the drilling head moves. The drilling unit can operate both manually and fully automatically. After each drilling cycle, the processing unit automatically moves to the next drilling position along the X and Y axes. Operation is designed for ease of use. Data transfer to the machine control is possible via DXF/DWG file formats using a programming station. Alternatively, programming can also be performed directly at the machine control unit. The system is highly robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drill head speed: up to 2,500 rpm (standard version), supplied with the appropriate speed for your application • Tool holder: SK 40 • X, Y and Z axis driven by servomotors • Rapid traverse in X axis: 20 m/min • Rapid traverse in Y axis: 5 m/min • Distance from table top to bottom edge of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St 50 (tool-dependent) • Tapping: M4 – M30 (with compensation chuck) • Y-axis travel: 300 mm • Positioning tolerance X axis: ±0.1 mm • Positioning tolerance Y axis: 0.06 mm • Positioning tolerance Z axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Compressed air connection: 8 bar • Front safety via light barrier • Rear access protection via safety fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming directly at the machine • Milling of elongated holes and circles • Lubrication via minimal quantity spray system • Without material clamping devices • Remote maintenance via Teamviewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions, rotational speed • Simulation of work processes • Digital handwheel Your benefits: • Workpiece surfaces are protected • Clear, graphical user interface • Machining directly at the workpiece end is no problem • 50% space savings compared to moving-table systems • Chips are collected in a chip tray • Easiest programming & operation • Minimal quantity spray system (standard) Lsdpfx Ajfu Ivzsl Nead • Programming errors eliminated by CAD/CAM You are welcome to view the desired system at any time in our production/showroom. Please feel free to contact us about this. We look forward to your inquiry! Plantec Maschinen GmbH

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, 20240611-01 Lodpfx Ajyvuh Ijl Nead

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, hurco-vmx30-specs-de Lsdpfx Aox D Ikpjl Noad

Kondisi: bekas, Tahun pembuatan: 2007, Detail teknis: Diameter putar: 220 mm Panjang putar: 310 mm Kebutuhan daya total: 17 kW Berat mesin sekitar: 3,3 t Kebutuhan ruang sekitar: 2,25 x 1,63 x 1,94 m Diameter putar di atas alas: 430 mm Lodpfxsx Aq Hws Al Noad Diameter lubang tengah: 45 mm Jarak antara senter: 687 mm Lintasan geser radial (Sumbu X): 160 mm Lintasan geser aksial (Sumbu Z): 310 mm Kecepatan putar spindle: 0–6.300 rpm

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Ledecc D Ddspfx Al Nead Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, 1 Lodoyxh Hpopfx Al Njad