Pengumpan bar

HYDROBAR LNS - THB-42-2,4

Kondisi: baik (bekas), Tahun pembuatan: 2010, Pusat Pemesinan Sugino Xion-II-5AX-CE Pabrikan: Sugino Machine Limited Japan Tipe: Xion II 5AX CE Tahun pembuatan: 2010 Jumlah sumbu: 5 Perjalanan sumbu X: 300 mm Perjalanan sumbu Y: 300 mm Perjalanan sumbu Z: 200 mm Rentang putar sumbu A: -90° – +90° Sumbu putar C: 360° Diameter alat maksimum: 40 mm Lodpfjx Hqwgjx Aarort Berat maksimum alat: 15 kg Kecepatan putar spindel: 40.000 rpm Taper alat: HSK-E32 Akurasi posisi sumbu X, Y, dan Z: 0,002 mm Akurasi pengulangan sumbu X, Y, dan Z: ±0,001 mm Berat mesin: 2800 kg Tidak ada jaminan atas keakuratan, kelengkapan, dan keterkinian data yang tercantum.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, panjang pembubutan: 700 mm, jarak pergerakan sumbu X: 205 mm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 22.000 W, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 3.900 mm, berat keseluruhan: 9.800 kg, Complete machining with twin spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg payload Chip conveyor Paper band filter system with pressure tank Max. turning diameter: 400 mm X-axis: 205 mm Z-axis: 700 mm Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle power: 22 kW Counter spindle speed: 6000 rpm Counter spindle through-hole: 62 mm Counter spindle power: 15 kW Tool changer: 16 positions Speed of driven tools: 6000 rpm Lsdpfjyn Em Rsx Aarjrt Positions lower turret: 16 Driven tool speed: 6000 rpm Driven tool power: 7 kW Chip conveyor: yes Tool Eye: yes Length: 6000 mm Width: 3900 mm Height: 2800 mm Weight: 9800 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, neither representation nor contract terms are implied. We recommend verifying all important details.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 30,000 rpm LINEAR AXES - Travel X/Y/Z axes: 450/270/310 mm - Rapid traverse speed (X/Y/Z): 75 m/min SWIVEL AXIS B - Travel: -20/+90 degrees - Minimum resolution: 0.001 degrees TOOL CHANGER - Tool changer type: Parapluie (umbrella-type) - Number of tools in magazine: 40 TURNING SPINDLE - Spindle speed: 8,000 rpm - Max. bar diameter: 32 mm - Minimum resolution C-axis: 0.001 degrees - Travel: 360 degrees ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1,500 x 2,600 mm - Machine height: 2,300 mm - Machine weight: 2,850 kg MACHINE HOURS ACCESSORIES - Control: Siemens 840 D Lrsdpjuhbr Tsfx Aarjt - 3-color status light

Kondisi: bekas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle head strokes (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of live tool positions on the turret: 6 - Max. diameter at subspindle: 12.7 [mm] - Subspindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] Lsdpfxeuhav De Aarort EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and subspindle - Brake for main spindle and subspindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various static and driven tool holders

Kondisi: baru, Tahun pembuatan: 2025, Dry rotary vane vacuum pump. Available in stock. Completely new pump. Comes with a 12-month warranty. Nominal flow rate: 25 m3/h at 50Hz. Ultimate vacuum: 150 mbar abs. If you have any questions, please contact us. Lsdsftzpvjpfx Aarort

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 independent - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - CNC control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump Lodpfx Ajuhauyearsrt - Chip evacuation system: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Kondisi: baik (bekas), Tahun pembuatan: 1997, The HARDINGE CONQUEST T42L, a used 3-axis CNC lathe with live tooling, is a robust and precise medium-sized slant-bed lathe with a turning length of approximately 700 mm, bar capacity of 42 mm, and a 12-position automatic turret with live tools. It features a FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer. Spindle: ASA 5″ Max spindle speed: 4,200 rpm Full C-axis Spindle power: 20 HP X-axis travel: 172 mm Z-axis travel: 575 mm Machine weight: 4,000 kg Ledpfxevtrc Se Aarsrt Complete with 210 mm AUTOBLOCK hydraulic chuck, tool presetter, programmable tailstock, 2 live tool holders (1 axial and 1 radial), chip conveyor, set of fixed and manual tool holders, and backup disk. Year of manufacture: 1997. CE-compliant and in excellent condition. Also available: CONQUEST T51 model.

Kondisi: baik (bekas), LNS Stangenlader Lsdpsr Iygijfx Aarsrt

Kondisi: diremaj di bengkel (bekas), CNC vertical machining center "DECKEL MAHO DMC 635 eco" Fitted with Siemens 810 Powerline path control Ledpfx Aouqmvkoarort Year of manufacture: 2010 Travel distances: X 635 mm / Y 510 mm / Z 460 mm Spindle speed range: 20 – 8,000 rpm, stepless adjustment Including the following accessories: - Fixed angle table, 790 mm x 560 mm clamping surface - Vertical tool changer with 20 magazine slots - Electronic handwheel - Heidenhain TT 140 tool length measurement system - Fully enclosed cabin with sliding doors and interior lighting - Coolant system - 4-color signal lamp - Chip conveyor - Chip rinse gun - 3 height-adjustable machine feet - Operating manuals

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled with counter spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - CNC control: SIEMENS 840D - Counter spindle - Polygon turning unit: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER Lodpfsuhatpox Aarert * Note: Functionality not guaranteed. Must be checked by a qualified company commissioned by the buyer.