Pusat permesinan - vertikal

Hyundai Kia VX380TD

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Gijdpfoxddvnjx Adtel Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, jam operasional: 7.792 h, kapasitas angkut: 4.000 kg, tinggi angkat: 5.650 mm, pusat beban: 500 mm, jenis bahan bakar: gas, Tersertifikasi DGUV hingga: 11/2025, panjang garpu: 1.600 mm, kondisi ban: 95 persen, berat kosong: 7.183 kg, warna: kuning, We are offering an absolutely top-condition Jungheinrich forklift. In 2021, it was completely refurbished to a 5-star standard by Jungheinrich and has only clocked 45 operating hours since the overhaul. The paint is original – it has not been resprayed or touched up! The forklift has always been stored indoors and is in excellent condition. Maintenance and safety inspection (UVV) are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 45) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift truck Year of manufacture: 2012 / 5-star refurbishment in 03/2021, complete with new Kaup fork positioner T466 Rated capacity: 4,000 kg Lift height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load centre: 500 mm Giodow N Iz Hjpfx Adtjl Mast: Triple, including free lift Equipment: Solo-Pilot, road lighting package (StVZO), LED work lights (2 front, 2 rear), front/rear/cabin/roof windows Steel doors, leather seat, rear-view mirror, armrest, 2-way additional hydraulics New Kaup fork positioner 4.8T 466B The truck has only been run for 45 hours since its overhaul, and all safety inspections and maintenance have been carried out.

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Tool grinding machine Jungner Sweden Giedpfx Adjwdihrotsl Year of manufacture: 1995 Accessories

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Reishauer RZ 362A dengan sekitar 60 set cakram berlian Dimensi ulir penggiling: Diameter luar min/maks: 280/350 mm Lebar: 84/104 mm Pitch maks. dengan batasan: MOD 8.0 (DP 3,2) Jumlah start: dengan batasan hingga 3 Lebar yang dapat digunakan maksimum (pergeseran): 90 mm Informasi teknis lebih detail dapat ditemukan pada file PDF terlampir. Aksesori: Perangkat dresser Cakram berlian sekitar 60 set Batu gerinda Turbo separator Gijdpfx Aexb Ufuodtsl

Kondisi: baik (bekas), Tahun pembuatan: 2008, 1 pusat pemesinan vertikal bekas Merek: Deckel Maho Tipe: DMU 80 monoblock Tahun pembuatan: 2008 Kontrol: ITNC 530 Detail Teknis Perjalanan sumbu X: 980 mm Perjalanan sumbu Y: 630 mm Perjalanan sumbu Z: 630 mm Kontrol: iTNC 530 Kebutuhan daya total: 10 / 15 kW Berat mesin sekitar: 9,5 t Kebutuhan ruang sekitar: 4*4*2,5 m Informasi tambahan Perlengkapan: Handwheel elektronik Mode operasi 4 Kepala frais putar manual Motor spindle 12.000 rpm SK 40 / penjepit DIN 69872 Majalah alat 32 posisi Gsdpfx Asxa Eudsdtsil Meja tetap 1250 x 700 mm Konveyor serpihan Perangkat pendingin

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 124, translation-001 Giodpfx Aewl An Iedtsl

Kondisi: bekas, Technical Details: X-travel: 6,500 / 13,150 mm Y-travel: 4,000 mm Z-travel: 1,250 mm W-axis: 2,250 mm Table size: 5,500 / 12,150 x 3,000 mm Max. workpiece weight: 70,000 / 105,000 kg Ram dimensions: 480 x 510 mm Milling spindle motor: 63 kW Spindle torque: 3,300 Nm Tool holder: DIN 39871 AD ISO 50 Milling spindle speed range: 6.3 – 4,000 rpm Gedpfx Adjwc A Shjtjil Feed rate: 1 – 24,000 mm/min W-axis feed: 1 – 6,000 mm/min Clearance between columns: 3,500 mm Clearance height: 3,000 mm Total connected load: 120 kW Machine weight approx.: 245 t Space requirement approx.: 29.0 x 7.7 x 8.1 m The machine is in nearly new condition and was completely modernized in 2020! Equipped with CNC SIEMENS 840 D Automatic tool magazine for 153 tools Automatic milling head magazine for 6 milling heads Machining module – straight – extended straight – Machining module – angular standard – 4,000 rpm, 144 x 2.5°, ISO 50 Machining module – narrow extended angular – 40 kW, 4,000 rpm, 1,800 Nm, 144 x 2.5°, ISO 50 Machining module – universal index – 40 kW, 4,000 rpm, 2,100 Nm, C-axis 144 x 2.5°, B-axis +/- 44 x 2.5°, ISO 50 Coolant system, chip conveyor

Kondisi: bekas, Tahun pembuatan: 2006, Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front spindle bearing diameter: 70 mm Rapid traverse (x/y/z): 20,000 mm/min Gjdpjv Az Ucofx Adtjil Feed rate: 1 - 20,000 mm/min Creep feed rate: 15 steps / 0 - 1,260 mm/min Tool magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter with free adjacent pocket: 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool time: 1.0 sec Total power requirement: 34 kVA Machine weight: approx. 7.2 t Space requirement: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Kondisi: baik (bekas), Manufacturer: ESTARTA Model: 301 MV Condition: Used Stock Number: 4576 Location: Badajoz, Spain Dimensions: 1520 x 1020 x 1260 mm Weight: 1,550 kg Wheel gap opening: 1.5 / 50 mm Max. grinding wheel width (in plunge grinding): 125 mm Gsdpfx Aor Ezfpsdtjil Work wheel dimensions (OD x ID x width): 300 x 125 x 175 mm Min. external diameter of work wheel: 220 mm Max. profile depth of work wheel: 8 mm Regulating wheel dimensions (OD x ID x width): 220 x 125 x 125 mm Min. external diameter of regulating wheel: 165 mm Max. profile depth of regulating wheel: 8 mm Work wheel motor power: 7.5 kW Regulating wheel motor power: 0.75 kW Work wheel head tilt angle: +/- 5º

Kondisi: sangat baik (bekas), nl_NL Gsdpfx Aderfx Tnotsil