Pusat pemesinan vertikal

Hyundai-Kia VX500 X: 1060 / Y: 510 / Z: 635 mm

Kondisi: bekas, Tahun pembuatan: 2006, Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm Ihjdpfx Aov Az Ucoa Nst T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front spindle bearing diameter: 70 mm Rapid traverse (x/y/z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Creep feed rate: 15 steps / 0 - 1,260 mm/min Tool magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter with free adjacent pocket: 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool time: 1.0 sec Total power requirement: 34 kVA Machine weight: approx. 7.2 t Space requirement: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 610 mm, daya nominal (semu): 37 kVA, torsi: 236 Nm, produsen pengendali: Heidenhain iTNC530, model controller: iTNC530, lebar meja: 700 mm, panjang meja: 1.700 mm, beban meja: 700 kg, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 9.000 kg, kecepatan spindel (maks.): 12.000 rpm, jam operasional spindle: 16.580 h, daya motor spindle: 37 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 48, Perlengkapan: dokumentasi / manual, konveyor serpihan, 3-axis CNC machining centre Heidenhain iTNC530 X-axis travel: 1500 mm Y-axis travel: 700 mm Z-axis travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 positions Rapid traverse: 36 m/min Table load capacity: 700 kg Iodpfx Asvz Tyuea Njht Through-spindle coolant: 20 bar Chip conveyor Electronic handwheel

Tahun pembuatan: 1990, Kondisi: baik (bekas), CNC 4th axis Make: NIKKEN Type: CNC-200, Year: 1990 with tailstock and base plate. Ijdpsgabu Ujfx Aa Neht

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 540 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 20 m/menit, kecepatan pemakanan sumbu X: 16 m/menit, laju pemakanan gandar Y: 16 m/menit, laju pemakanan sumbu Z: 16 m/menit, daya nominal (semu): 16 kVA, produsen pengendali: Heidenhain, model controller: ITNC 530, beban meja: 800 kg, berat keseluruhan: 5.300 kg, kecepatan spindel (min.): 10.000 rpm, jam operasional spindle: 8.500 h, daya motor spindle: 12 W, hidung spindel: ISO B40, jumlah spindel: 1, jumlah slot dalam magazin alat: 24, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, konveyor serpihan, Machine in very good condition and maintained by the manufacturer. Available immediately. Renishaw probe. Video available upon request. Delivery and installation by our team possible. Ihjdpfxowxrgto Aa Njt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 700 mm, gerak cepat sumbu X: 40.000 m/menit, pergeseran cepat sumbu Y: 40.000 m/menit, pergerakan cepat sumbu Z: 40.000 m/menit, lebar meja: 750 mm, panjang meja: 2.900 mm, beban meja: 2.150 kg, 5-axis machining center DMG MORI - DMF 260-7 X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm A-axis: 360,000° B-axis: -110° to +110° Table length: 2,900 mm Table width: 750 mm Table load capacity: 2,150 kg Table diameter Ø: 750 mm Feed rate X-axis: 40,000 mm/min Feed rate Y-axis: 40,000 mm/min Feed rate Z-axis: 40,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 35 kW Ihjdpfx Aaoxuqv As Not Spindle speed: 18,000 rpm Tool changer: 30 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Cooling unit: Yes Length: 8,400 mm Width: 3,423 mm Height: 2,620 mm Weight: 16,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all important details.

Kondisi: bekas, Tahun pembuatan: 2001, Panjang pembubutan 470 mm Ihodpfxjxdfi No Aa Net Diameter pembubutan maks. 390 mm Putaran spindle 3500 rpm Gerakan X/Z – 235/520 mm Jumlah stasiun di revolver 12 pcs Kontrol: MSG 500 Perlengkapan: Berbagai dudukan alat

Kondisi: bekas, Tahun pembuatan: 2012, de2machineseeker-specs-001 Ihsdsw A Spvjpfx Aa Not

Kondisi: bekas, Tahun pembuatan: 2007, Kecepatan putar 8000 rpm Berat 5500 kg Tahun pembuatan 2007 Kontrol Siemens 840D Dimensi (Panjang/Lebar/Tinggi) 3600 x 2800 x 2400 mm Perjalanan sumbu-x 1035 mm Ihjdjwm Rqaepfx Aa Nst Perjalanan sumbu-y 560 mm Perjalanan sumbu-z 510 mm Lebih banyak gambar tersedia

Kondisi: baik (bekas), Tahun pembuatan: 2008, Teile, die von Hand gezeigt werden, sind nicht enthalten. 12.000 U/min Isdpeuc Tpgofx Aa Njht X 610 mm Y 420 mm Z 450 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Travel x-axis 800 mm y-axis travel 600 mm z-axis travel 500 mm O F F E R We can offer you the following, subject to prior sale and errors, without obligation, ex stock: HERMLE 5-Axis Universal Machining Centre in Gantry Design with Swivel Rotary Table Model C 800 U Year of manufacture 1998 12648 _____ Milling head travel, longitudinal X-axis 800 mm Milling head travel, transverse Y-axis 600 mm Milling head, vertical Z-axis 500 mm NC swivel axis A-axis -20 / +90 ° NC rotary table C-axis 360,000 ° Maximum overhang of vertical spindle approx. 600 mm Maximum installation height under spindle approx. 100 / 600 mm Table size (swing circle Ø 630 mm) 540 x 540 mm Max. table workpiece weight approx. 300 kg Spindle taper SK 40 Iodpfex Dndcox Aa Neht Spindle speeds, vertical, stepless 18,000 rpm Feeds/rapid traverses stepless 2 – 35,000 mm/min Feed force approx. 11/16 Nm Spindle drive 15 kW Total connected load approx. 37 kW - 400 V - 50 Hz Weight approx. 8,000 kg Accessories / Special equipment: • Compact, modified gantry design with 3 axes in milling head for traverses up to 35 m/min. All drives and guideways positioned outside the working area. • Machine bed made of mineral cast with high damping properties, installation without foundation required, high static and dynamic stability. • SIEMENS 5-axis path control type 840 D with graphics and all modern programming options for full 5-axis machining of complex workpieces, including electronic handwheel • NC swivel rotary table (C-axis 360,000° / B-axis -20/+90°) Ø 630 mm • Robust vertical head with HERMLE milling spindle up to 18,000 rpm, with automatic swivel nozzle block • Tool changer with extended (auxiliary) magazine for up to 87 tools • Coolant system with chip conveyor, oil mist extractor with filter, full enclosure • Comprehensive accessories including approx. 50 tool holders, operating manuals. Condition: very good – Machine powered, ready for demonstration A video of the machine will soon be available here (please click on the link): C 800 U/4 Delivery: ex stock – immediately available, FCA Metzingen Payment: strictly net – due immediately upon receipt of invoice, prior to delivery of the machine