Latihan pilar

IBERDRILL B 60

Kondisi: baru, en-001-BoringPerformance-Steel-Drill Bledpfjfg U Tuex Ad Rok

Kondisi: baik (bekas), Roots blower Manufacturer: Leybold Bedpfx Ajhmb E Hod Rslk Model: RUVAC RA 3001 Cat. No.: 11971 Condition: Fully overhauled Warranty: 12 months

Kondisi: baru, Tahun pembuatan: 2024, Drilling capacity in steel (diameter): 35 mm Throat depth: 320 mm Drilling stroke: 150 mm Spindle taper: MK 4 Table size: 500 x 400 mm Spindle speeds: 75 – 3,010 rpm Quill feed range: 0.1 / 0.15 / 0.22 / 0.33 mm/rev Quill stroke: 150 mm Operating voltage: 400 V Total power requirement: 1.8 kW Machine weight approx.: 275 kg Space requirement approx.: 0.70 x 1.00 x 1.95 m - Factory no.: 138050673 - Electromagnetic feed Bjdpfewlvlaex Ad Rjlk - Tapping device - Machine vice, 150 mm - Two clamping bolts, 14 mm - 9-piece drill bit set (14.5 mm – 30 mm, MK 2 / MK 3) - Cutting oil spray

Kondisi: baru, en-technical-001 Blsdpfx Adod R Nv Is Rjk

Kondisi: baru, Drilling capacity in St 60: 40 mm Thread cutting in St 60: M 24 Thread cutting in GG 20: M 30 Spindle speeds – stepless: 160–2250 rpm Short spindle: MT 3 Spindle stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table – usable support area: 515 x 360 mm Spindle/table distance min./max.: 117/701 mm T-slots: number – width – spacing: 2 x 14 x 224 mm Feed rate: 0.1 + 0.2 mm/rev Machine height: 1840 mm Standard equipment: - Main switch with lockable motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Stepless speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Connection terminals in control cabinet (no connecting cable) - Spindle guard with electrical interlock Special equipment: Item 12 LED machine lamp with radially adjustable light beam, connection power 230 V, protection class IP65 Item 20.1 Thread cutting device with foot switch, for thread cutting with end stop, max. 6 threads/min. (thread cutting performance depends on spindle speed) Item 25 Bledpoyvvq Djfx Ad Rjk Coolant system B, consisting of: separate tank (33 l), pump with motor protection switch, complete fittings Item 37.1 Digital drilling depth display zero point setting (drilling start), 5-digit LED display, digit height 13 mm

Kondisi: baru, Tahun pembuatan: 2026, Continuous/standard drilling capacity (mm): 20/23 (in E335/ST60) Thread cutting capacity (dependent on pitch): M12 Spindle: MT II Spindle speed (infinitely variable): 40–4000 rpm Drilling depth (mm): 100 Throat (mm): 240 Column diameter (mm): 82 Usable working area (W x L) (mm): 340 x 280 T-slot size (arm), spacing (mm), slot width (mm): Quantity 2, 125, 13/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: Quick-adjust stop ring Feed (mm/rev): Manual Table height adjustment: Rack and pinion Motor: Three-phase 400V with frequency inverter (kW): 1.5 Distance spindle to working area (mm): 160 – 880 Machine dimensions without packaging (mm): 355 x 705 x 1825 Machine dimensions with packaging (mm): 572 x 936 x 2142 Weight (kg): 195 Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover with ergonomically inclined front - LED lighting - Quick-adjust and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Emergency-stop mushroom button - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Connection cable with CEE plug Optional accessories: Drilling package 3, consisting of: - Machine vice [felix] 2.0 100 mm - Keyless drill chuck 3–16 mm (accuracy 0.17 mm) - Morse taper adapter MT 2 B18 and reduction sleeve MT 2 to MT 1 €485.00 Bledpfxsir Ir To Ad Rsk 3-year warranty for single-shift operation Free delivery (Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORISED FLOTT PARTNER AND CAN OFFER YOU THE COMPLETE RANGE OF FLOTT PRODUCTS! REQUEST AN OFFER!

Kondisi: baru, Tahun pembuatan: 2026, Heavy-duty construction of the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency-stop impact switch Drill depth stop Integrated LED work light in the drill head Precisely machined, stable drill table with diagonally arranged T-slots with a surrounding coolant channel Drill table tiltable ± 45° and rotatable 360° V-belt guard with safety switch Precision spindle bore Machine control safety electronics in 24 V DC Guaranteed concentricity accuracy ≤ 0.02 mm measured at the drill spindle Thick-walled steel column for high load capacity and stability Massive, large-sized base plate with T-slots Dimensions and weights Column diameter 92 mm Bodpfx Adjg Uaiue Rslk Length approx. 945 mm Width/Depth approx. 485 mm Height approx. 2040 mm Weight approx. 162 kg Drilling capacity Drilling capacity in steel (S235JR) 30 mm Continuous drilling capacity in steel (S235JR) 25 mm Drill table Work surface length 355 mm Work surface width 355 mm T-slot type diagonal T-slot size 14 mm T-slot number 2 Rotation 360 ° Tilt 45 ° Distance spindle - drill table max. 784 mm Speed range Speed range 120 – 1810 rpm Number of speed ranges 9 Electrical data Rated voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Work surface length 230 mm Work surface width 300 mm T-slot size 16 mm T-slot number 2 Spindle Quill stroke 125 mm Spindle taper MK 4 Throat 270 mm Location: From stock 54634 Bitburg - immediately available -

Kondisi: baru, Stepless column drilling machine with fully functional thread cutting device. Standard equipment includes a digital speed display. The drill table is adjustable via rack and pinion and can be swiveled around the column. Motor protection included. Technical Data: Drilling capacity: 40 mm Thread cutting capacity: M 24 Spindle: MT 4 Drilling depth: 150 mm Spindle speeds, stepless Range A: 65 - 540 rpm Range B: 245 - 2000 rpm Throat depth: 265 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size: 560 x 470 mm / 14 mm Base plate size: 685 x 485 mm Dimensions (W x D x H): approx. 580 x 950 x 2000 mm Connected load: 1.7 kVA Weight: approx. 370 kg Features: - Gear preselector Bsdpfoqfdywsx Ad Rjlk - Large machine table - Digital speed display - Stepless speed adjustment - Thread cutting device - Front table clamping and height adjustment - Adjustable drilling depth stop - Overload protection Scope of delivery: - Coolant system - Two MT 3/2 reducing sleeves - LED machine lamp - Height-adjustable safety guard with micro switch - Operating manual - CE/IEC compliance

Kondisi: baru, Drilling capacity in steel (diameter): 60.0 mm Arm reach: 350 - 1,600 mm Workpiece height – max.: 665 x 1,250 mm Speed range: 38 – 2,000 rpm Spindle taper: MT 5 Base plate: 960 x 1,760 mm Thread cutting: M42 Quill travel: 325 mm Total power requirement: 4.0 kW Machine weight approx.: 3,800 kg Dimensions (L x W x H): 2,600 x 1,100 x 2,770 mm Features: - Standard with stepless speed adjustment - Set speed is displayed digitally - Drill spindle with high concentricity accuracy - Equipped with automatic spindle brake Blsdpfx Asxaa H Uod Rsk - Arm, drill head, and column with independent hydraulic clamping - Large dimension base plate, ideal for machining large workpieces - Thick-walled, ground column for enhanced sliding properties of the arm - Easy height adjustment of the arm via lifting motor - Spindle position remains unchanged, ideal for series production - Using push buttons, drill head and column can be clamped or released separately or simultaneously - Hardened and ground guideways on the arm - Counterbalance for quill via counterweight - Ideal for drilling, countersinking, reaming, and thread cutting Scope of delivery: - Cube table - Drill chuck arbor MT 5 / B 16 - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine light - Initial fill with Shell Tellus 46 - Coolant system - Frequency converter - Digital speed display - Lifting motor - Hydraulic motor - Height-adjustable safety cover - Operating tools

Kondisi: baru, Drilling capacity in steel (diameter): 50 mm Drilling capacity in cast iron (diameter): 60 mm Tapping capacity: M42 Throat depth: 360 mm Quill stroke: 200 mm Spindle taper: MK 4 Spindle feed range: 0.1-0.2-0.3-0.4 mm/rev Spindle speeds: 190 - 1900 rpm Column diameter: 175 mm Table size: 550 x 550 mm Total power requirement: 4 kW Machine weight approx.: 0.85 t Space requirement approx.: 2.2 x 0.7 x 1.3 m Column Drilling Machines – V-belt/Gear Drive Combination - Wide stepless speed range in 3 steps - Mechanical speed adjustment with hand lever (Model V) - Electronic speed adjustment with frequency inverter (Model VE) - Front-mounted digital speed display - Gear lubrication by automatic oil pump “VE” - Machine base plate with integrated coolant system - Machine lamp - Swivelling and tilting table MGI - Feed and automatic retraction with electromagnetic clutch - Front handwheel for fine adjustment of manual feed - Scale with adjustable drilling depth - Automatic feed reversal for tapping operations - Automatic tool ejector - Electrical controls integrated in the drill head Bljden Ea Twepfx Ad Rok - Emergency stop push button - Switch for clockwise/counterclockwise rotation - Height-adjustable chip guard with microswitch - CE marking