Oven pengeringan inframerah untuk komposit film

IBT Infra Bio Tech GmbH Infrarot Aushärteofen

Manufacturer
IBT.lnfraBioTech GmbH
Art.-No. 3200 0088

Technical Data
Condition: as-new; little used in trial series
Functionality: fully operational
Year of manufacture: 2018
Connected load: 58 kW
Cooling capacity, water connection (site-provided): 30 kW
Conveyor belt length: 7,000 mm
Conveyor belt width: 310 mm
Infeed height: 55 mm
Infeed width: 308 mm

TECHNICAL DETAILS
Application: Continuous oven for curing in film lamination technology
Component temperature: max. 100°C
Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm
Total height without control cabinet: 2,000 mm
Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm
Frame constructed from stainless steel profile tube, height-adjustable: ± 30 mm

Conveying System
Vacuum conveyor belt made of silicone, belt width 310 mm
Conveying speed: max. 5 m/min
Conveyor belt height: 950 mm ± 30 mm
Belt infeed/outfeed openings (WxH): 308 x 35 mm
Free area at belt infeed: approx. 750 mm
Free area at belt outfeed: approx. 750 mm

Conveyor Belt Operation:
Continuous operation, adjustable up to max. 5 m/min,
straight run adjustment centered by guide rollers with photoelectric monitoring at both infeed and outfeed sides. Loading and unloading is manual.

Intended Use
The curing oven is a conveyor system for continuous operation with a maximum feeder speed of 5 m/min. There is an open area at the infeed and outfeed for loading and unloading components. Between these zones is the enclosed heating section with 6 IR modules (height adjustable). The component temperature reaches up to 100°C, used for heating solvent-free adhesives within a film composite. The return path of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are drawn onto the conveyor belt via vacuum. The control cabinet is located outside the cleanroom, separate from the machine.

The system operates in a cleanroom compliant with EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The system is exclusively for heating film laminates.

Equipment
- 6 adjustable infrared heating modules, each with 6 infrared emitters
- 6 pyrometers for precise temperature monitoring
- PU conveyor belt for efficient material flow
- Integrated control and regulation system
- Height-adjustable stainless steel base frame
- Vacuum conveyor belt
- Cooling water distribution in subframe (G1”)
- Water cooling for the belt return and rear sides of the IR modules
- Mechanically interlocked service doors
- Operating panel mounted on the left side of the infeed
- Control cabinet cooling unit, water connection provided by site
Ndjdpfxewnm Ukj Aahef

History
This oven was intended for use in a cleanroom environment and was only used sparingly for test series. The oven was used for curing solvent-free adhesives within a film composite.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.