Latihan pilar

IMATEC B 40

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Maximum bending diameter: 36.0 mm (steel) Maximum cutting thickness: 36.0 mm (steel) Motor speed: 1450 rpm Oil capacity: 32.0 liters Motor: 380 Volt, 50 Hz Total power requirement: 5.5 kW Weight: 650 kg Dimensions (L x W x H): 1470 x 1200 x 1020 mm Podexabntspfx Abuspl Exhibition machine - NEW (!!) Features: - Maximum performance, minimal consumption - Hydraulic combination machine for bending and cutting operations * Suitable, for example, for reinforcing steel or solid material - Bending mode with 3x different angle settings - Manual and automatic modes selectable - Simultaneous bending and cutting operations possible when the machine is running - "ECO Mode" = Hydraulic pump operates only when the foot switch is engaged - Freely movable foot switch - Operating manual included Technical Data: - Steel 45 kg/mm²: Bending Ø 36.0 mm / Cutting Ø 36.0 mm * With 2 pieces – Steel 45 kg/mm²: Bending Ø 20.0 mm / Cutting Ø 24.0 mm - Steel 65 kg/mm²: Bending Ø 32.0 mm / Cutting Ø 32.0 mm * With 2 pieces – Steel 65 kg/mm²: Bending Ø 18.0 mm / Cutting Ø 20.0 mm - Steel 85 kg/mm²: Bending Ø 26.0 mm / Cutting Ø 28.0 mm * With 2 pieces – Steel 85 kg/mm²: Bending Ø 14.0 mm / Cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Kondisi: baik (bekas), Tahun pembuatan: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Ppedpfxow Dvkas Abuel Machine weight approx. 2500 kg Technical Data – Main data: Table surface: 605 x 300 mm Max. longitudinal table travel (manual): 750 mm Cross table travel: 340 mm Grinding height (min./max., table to new grinding wheel): 22.5 / 322.5 mm Standard magnetic chuck size: 600 x 300 mm Workpiece weight incl. magnet: 420 kg X-Axis / Longitudinal Travel: T-slots (number x width): 3 x 17 mm Table feed, hydraulic: 0.3 – 25 m/min Travel per handwheel revolution: 47 mm Y-Axis / Vertical Feed: Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm Graduation per handwheel division (x1/x10): 0.001 / 0.1 mm Spark-out strokes: 0 – 5 Rapid traverse: 400 mm/min Z-Axis / Cross Travel: Automatic cross feed, intermittent: 0.5 – 20 mm Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min Travel per handwheel revolution: 5.0 mm Graduation per handwheel division: 0.02 mm Standard grinding wheel: Diameter x width: Ø 355 x 38 (50) mm Bore: Ø 127 mm Speed: 1500 rpm Accessories: various grinding wheels Documentation

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Pjdjvrcqdopfx Abuspl Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.

Kondisi: bekas, Tahun pembuatan: 1971, Drilling capacity (steel/cast iron): 23 mm Spindle taper: 3 MT Throat depth: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1 / 0.6 / 0.25 mm Drive motor: 380 V, 1.25 / 2.15 kW Required space: 850 x 400 x 1770 mm Weight: 280 kg Pedpfxerz Nqaj Abuopl

Kondisi: bekas, Tahun pembuatan: 2014, Technical Details: Ppodpfx Aow D Dcqjbujl Swing diameter over bed: 356 mm Swing diameter over cross slide: 220 mm Turning length: 1000 mm Centre height: 180 mm Distance between centres: 1000 mm Spindle bore: 38 mm Speed range: 45 - 1800 rpm Longitudinal feeds: 0.043 - 0.653 mm/rev, 42 steps Tailstock quill taper: MT3 Tailstock quill travel: 95 mm Total power requirement: 4 kW Machine weight approx.: 0.85 t Machine dimensions approx. LxWxH: 1.92 x 0.8 x 1.49 m (incl. display unit) Various accessories

Kondisi: bekas, Tahun pembuatan: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm Tool holder SK40 Spindle speed 40-2000 rpm Control Heidenhain Aktiv Table size 600 x 210 mm Total power requirement 2 kW Psdpfx Asw A Ap Hsbuepl Machine weight approx. 0.73 t Space requirements approx. WDH 1200x1100x1600 mm - Power feed on X and Z axes - Röhm vise - Coolant system - several tool holders and clamping devices - Operating manual

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Ppodpfx Ashpktvjbuol Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Kondisi: baru, Centre distance ----- 1000 mm Centre height ----- 180 mm Swing over bed ----- 360 mm Spindle bore ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 kW Weight ----- 1000 kg INCLUDES Podpfx Ajga Ty Eobujpl * 3-axis digital readout, brand SINO * Quick-change tool post type Multifix TOOE5 with 4 tool holders * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work lamp and cooling system * Fixed and travelling steady rest HEAVY-DUTY VERSION WITH CAST IRON BASE

Kondisi: baru, Tahun pembuatan: 2025, Bench Drill for Metal CORMAK Z7016A Vario – Precision Column Drill with Stepless Speed Adjustment The CORMAK Z7016 Vario bench drill is a compact and functional column drill for metal, designed for precise drilling operations in professional and workshop environments. Thanks to stepless speed regulation, a robust construction, and versatile equipment, this model ensures maximum control over the drilling process and high work efficiency. Ppjdpfoxbzuvsx Abusl Key features Stepless speed adjustment – range 440–2600 rpm for optimal adaptation to the workpiece material. Robust cast iron construction – provides high rigidity and reduces vibration during operation. Worktable with height and angle adjustment – tiltable from -45° to +45°, and features rack-and-pinion height adjustment. Laser indicator and LED lighting – guarantee maximum drilling precision and operator comfort. Electronic speed display – allows real-time parameter monitoring. 65 mm vise included – ready to work straight out of the box. Design and technology The Z7016A Vario bench drill is built on a sturdy 60 mm diameter column and a rigid 345 × 210 mm cast iron base. The machine body and worktable are made from precisely machined castings. The MT2 taper allows for a wide range of tool mounting, while the 60 mm spindle travel enables deep hole machining. The total machine height is only 870 mm, making it an extremely ergonomic and mobile unit. Precision and performance With a motor power of 500 W (S1) and 650 W (S6), the CORMAK Z7016A Vario column drill enables effective drilling in metal up to a diameter of 16 mm. No need for changing gears thanks to the smooth speed adjustment, significantly reducing machine setup time. The ergonomic three-arm feed lever, depth indicator, and spindle guidance ensure high repeatability and accuracy of holes. Applications The Z7016A Vario model is a bench drill for metal recommended for: locksmith and repair workshops maintenance departments technical schools small production lines and prototyping workshops Standard equipment 65 mm vise Laser drilling indicator Work area LED lighting Electronic speed display Three-arm feed lever Tilting table with rack and pinion height adjustment Technical data Parameter Value Max drilling diameter 16 mm Spindle speed range 440–2600 rpm Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle to column distance 125 mm Spindle to base distance 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1/S6) 500 W / 650 W Overall height 870 mm Weight 31.5 kg

Kondisi: siap digunakan (bekas), lathe_spec_hu Pedpoxq Hhyofx Abuepl