MESIN PUNCHING IMS

IMS

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Soft starter Aucom IMS2 IMS520585 V5 C24 F1 E0 Motor Starter Ncjdpewv Idiofx An Eju 132–450 kW Digital display, fully automatic parameter settings. IMS2xxxx-V5 3 x 200 VAC ~ 525 VAC (in series / 3-wire connection) 3 x 200 VAC ~ 440 VAC (internal delta connection / 6-wire connection) IMS2xxxx-xx-C24 230 VAC or 400 VAC (+10% / -15%) Control Inputs Start (terminals C23, C24) Active 24 VDC, approx. 8 mA Mains frequency At startup 50 Hz (+/- 2 Hz) or 60 Hz (+/- 2 Hz) At startup > 45 Hz (50 Hz) or > 55 Hz (60 Hz network) In operation > 48 Hz (50 Hz) or > 58 Hz (60 Hz network) Interference immunity IMS2xxxx-xx-xxx-xx-E0 IP00 (open enclosure)

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 527, 23035 Technical specifications (approx.): - Punching force 30 T - Max. sheet thickness 10 mm - Max. punching diameter 105 mm - Punching capacity: - e.g., steel sheet: 105 mm in 1.5 mm; 45 mm in 5 mm - e.g., stainless steel sheet: 90 mm in 1.5 mm; 45 mm in 4 mm - Stroke 7 – 70 mm - Throat depth 560 mm - Max. number of strokes 120 SPM - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - Equipped with: - back gauge table with stops - foot switch - emergency stop button Nodpfx Anjlnkc Us Escu - quick-change punch tool device - various punch and die holders

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, tech-features-t25ve-en Nedpfx Anjttwfyo Ejcu

Kondisi: baik (bekas), gaya punching: 45 t, - Kapasitas 45 ton Nsdpfx Aju Havwsn Ejcu - Hidrolik - 4 stasiun - Pengendali kaki - Tombol darurat - 400 V

Kondisi: baru, Tahun pembuatan: 2025, de Ncedjm Twnlspfx An Eju

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 2131, Maximum pressing force: 55 kN Throat depth: 175 mm Adjustable punching stroke: 0 - 28 mm Nedpfx Anonacy Ts Ejcu Number of strokes at 15 mm stroke length: 30 Adjustable notching stroke: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Required space: 1170 x 620 x 1470 mm Weight: 930 kg

Kondisi: bekas, Inverter welding machine for manual metal arc welding IMS - GYS Type PROGYS FLEX 280A CEL MMA welding machine, inverter welder, manual metal arc inverter Serial no.: IEC 60974 Year of manufacture: 2020 Performance at mains operation 400V (40% duty cycle) 280 A Performance at mains operation 400V (60% duty cycle) 200 A Performance at mains operation 400V (100% duty cycle) 170 A Performance at mains operation 230V (40% duty cycle) 200 A Performance at mains operation 230V (60% duty cycle) 180 A Performance at mains operation 230V (100% duty cycle) 150 A Adjustable current range 5–280 A, stepless Mains connection 230 / 400 volts, 50 Hz - Operating voltage from 110 to 480 volts AC - Fully automatic adaptation to the available mains supply - Equipped with a 16 A CEE plug for 400 V mains power - Hot-start function (optimizes ignition characteristics, facilitates arc start with difficult-to-ignite electrodes) - Anti-stick function (optimizes electrode handling and prevents the electrode from sticking) - Arc-force function (optimizes arc stability and improves penetration) - Digital display - Socket for remote control connection - Ground cable with plug connection - Electrode holder with 3 m cable and plug connection - Stick electrode welding, suitable for all electrode types up to Ø 5 mm - TIG DC welding (without TIG torch supplied) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50–60 Hz) with earth conductor. - This unit must only be connected to a 3-phase power supply system with 4 conductors, with the neutral conductor being grounded. Dimensions (unit without cables) L x W x H: 470 x 270 x 430 mm Weight (without cables): 23 kg New, unused Njdpfxovg Rh Ts An Eocu

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 43.202 h, Fungsionalitas: berfungsi sepenuhnya, Doosan Lynx 2100LM – Mesin Bubut CNC SPESIFIKASI • Kontrol: Siemens S828D • Kecepatan spindle utama maks.: 6.000 rpm • Daya motor spindle utama: 12,6 / 10,5 kW • Daya alat berputar: 6,2 / 4,1 kW • Jumlah posisi alat: 12 • Chuck hidrolik 3 rahang: 170 mm • Diameter putar (ranjang/menara): 600 / 400 mm • Maks. benda kerja: Ø 300 x 510 mm • Diameter batang maks.: 51 mm • Rapid traverse (X/Z): 30 / 36 m/menit • Waktu pergantian menara: 0,11 detik • Ruang gerak: o X: 205 mm o Z: 560 mm • Dimensi mesin: 2540 x 1595 x 1693 mm • Berat mesin: 3.480 kg Perlengkapan • Pendinginan tekanan tinggi, 0,7 MPa • Pengukur alat • 8 dudukan alat tetap dan 4 dudukan alat berputar • Tailstock • Chuck collet • Penangkap benda kerja • Persiapan feeder batang • Feeder batang LNS 3 m • Konveyor serpihan (LNS MH500) Ncodeya N Ipjpfx An Esu

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Two identical presses are available. Maximum stroke speed: 200 mm/s. Oil viscosity: 46 cSt at 40°C. Maximum hydraulic / operating pressure: 25 / 210 bar. Half tool weight: 10 t. Pump output at 75 / 210 bar: 200 / 70 l/min. Pump motor power: 30 kW. Weight: 25 t. Nsdpfxjivt R Aj An Eocu

Kondisi: baik (bekas), Tahun pembuatan: 2001, Table 950x650 mm, ram 610x410 mm, stroke 0-140 mm Ncsdsqgcaaspfx An Eju

Kondisi: bekas, Tahun pembuatan: 2007, en-GB Ncsdpsu Icmhofx An Eeu