Pusat pemesinan 3-sumbu dengan ekstraksi

Ingersoll OPS 800 HSC-42.000 1/min

Kondisi: bekas, Tahun pembuatan: 2007, de-hu-01 Hfsdpfovyli Eex Aa Nsb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Hfedpfx Aaovgxfye Nob Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant supply through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools.

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5831, jarak pergerakan sumbu X: 7.500 mm, jarak lintasan sumbu Y: 6.200 mm, jarak gerak sumbu Z: 2.000 mm, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 80 m/menit, pergerakan cepat sumbu Z: 60 m/menit, panjang pemakanan sumbu X: 7.500 mm, panjang umpan sumbu Y: 6.200 mm, panjang umpan sumbu Z: 2.000 mm, kecepatan pemakanan sumbu X: 80 m/menit, laju pemakanan gandar Y: 80 m/menit, laju pemakanan sumbu Z: 60 m/menit, daya nominal (semu): 150 kVA, torsi: 45 Nm, produsen pengendali: Fanuc, panjang benda kerja (maks.): 7.500 mm, lebar benda kerja (maks.): 6.200 mm, tinggi benda kerja (maks.): 2.000 mm, diameter benda kerja (maks.): 6.200 mm, berat benda kerja (maks.): 50.000 kg, tinggi total: 5.500 mm, panjang total: 12.800 mm, lebar total: 8.900 mm, lebar meja: 6.200 mm, panjang meja: 7.500 mm, beban meja: 50.000 kg, kecepatan spindel (min.): 24.000 rpm, kecepatan spindel (maks.): 28.000 rpm, pasokan pendingin: 8 batang, daya motor spindle: 28.000 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 32, tegangan masuk: 380 V, jenis arus masuk: AC (pendingin udara), kecepatan operasi: 80.000 mm/dtk, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Tischabmessung 6.840 x 4.400 mm. Verfahrwege Achsen 'X' = 7.500 mm, 'Y' = 6.200 mm, 'Z' = 2.000 mm, 'B' = ±110°, 'C' = ±300°. Eilgänge 'XY' = 85 m/min, 'Z' = 45 m/min, 'BC' = 9.000°/min. Maximale Spindeldrehzahl 24.000 U/min (28 kW Motor). Spindelaufnahme HSK 63F. 16 x 2-fach Werkzeugmagazine. Seriennummer 5831 (2011). Hfsdju I Nzrepfx Aa Nob

Kondisi: bekas, Tahun pembuatan: 2001, en-001 Hfsdpfx Aaerw Dkno Njb

Kondisi: baru, ELMAG Stone Band Saw STBS-500 STBS for dry cutting (bricks, aerated concrete, insulation material) The stone band saws of the STBS series are specially designed for use on construction sites. In dry cutting mode, they are suitable for precise processing of materials such as aerated concrete, bricks, lightweight clay blocks, expanded clay, and wood, but also for insulation panels such as Styrofoam and Styrodur. ADVANTAGES - Extraction port for dust collection available - Saw blade tension can be easily and precisely adjusted using a handwheel - Includes forklift pockets and lifting eye - Constant sawband tension and 440 mm wheels for reduced risk of blade breakage and precise cuts - Direct drive with gear motor on an additional motor console Hfedpfx Ast Egfzea Nsb - Automatic saw blade shut-off at the end of the cut - Machine stops when doors are opened - Short saw blade changeover times - Straight, mitre, and manual contour cuts possible - Precise sawband guide, adjustable to the stone height - Easy relocation thanks to transport wheels and transport bar TECHNICAL DATA Cutting height: 500 mm Cutting length: 660 mm Angle: 0 - 45° Sawband dimensions: 3850x27 mm Table size: 710x1060 mm Rated power: 1.85 kW Connection: 230/50 V/Hz Dimensions: 1050x900x1840 mm Weight: 203 kg

Kondisi: bekas, x-travel 1050 mm y-travel 600 mm Hfjdpfx Aaevnh Ums Nsb z-travel 600 mm Control: Fanuc Machine weight approx. 7200 kg 8000 rpm Tool holder: 24

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.250 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 390 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 200 mm, jarak gerak sumbu Z: 1.300 mm, saluran batang: 65 mm, tinggi total: 2.700 mm, panjang total: 7.000 mm, lebar total: 3.000 mm, berat keseluruhan: 12.000 kg, Perlengkapan: dokumentasi / manual, en-DMG MORI CTXbeta1250TC Manufacturer: DMG MORI Model: CTXbeta1250TC Year of manufacture: 2008 (Retrofit in 2022) Control: Siemens 840D Solutionline Number of axes: 5-Axis Equipment: - Automatic tool changer - Swivel head as B-axis - Belt filtration system with high-pressure coolant supply and chip conveyor - Differential pressure clamping for main and sub spindle - Workpiece pick-up device - Preparation for bar feeder (optionally available) Technical Specifications: Max. turning diameter: 500 mm X-axis: 450 mm Y-axis: 100 mm Z-axis: 1300 mm B-axis: 220° Spindle bore: 65 mm Spindle speed: 5000 rpm Spindle power: 34 kW Sub spindle speed: 6000 rpm Sub spindle bore: 52 mm Sub spindle power: 20 kW Tool changer: 24 stations B-axis mount: HSK 63 B-axis spindle speed: 12,000 rpm B-axis spindle power: 22 kW Machine dimensions approx. (L x W x H): 7000 x 2300 x 2300 mm Weight approx.: 8,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Options: · Full enclosure · NC-swivel head as B-axis · Coolant system and chip conveyor · Documentation · Geometric accuracy within new machine tolerances Condition: - Machine fully functional Hfedpoubyv Refx Aa Neb - Geometry within manufacturer’s new machine tolerance - All wear parts replaced Retrofit 2022: - Linear guides Z1 and Z2/3 replaced - Linear guide Y-axis replaced - Main and sub spindle overhauled - Milling spindle overhauled - B-axis (bearing and clamping) replaced - Sliding covers overhauled - Hoses and cables overhauled, drag chains serviced - Cabin doors repainted, viewing windows replaced - Maintenance carried out according to manufacturer specifications

Tahun pembuatan: 2022, jam operasional: 108 h, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: SN2120, EDM312MF30-SLM (second-life machine) Hfjdpfx Ashtrdysa Neb Technical Specifications: Travel paths: 450x300x300 mm Workpiece clamping table: 820x400 mm Tank size: 900x520 mm Filling height: 300 mm Distance table/electrode holder: 150/450 mm Max. workpiece weight: 800 kg Max. dielectric fluid volume: 700 l Dimensions (W x D x H): 2700x1800x2350 mm Machine weight: 2500 kg Power supply: 3/N/PE 400/230V 50Hz Power consumption: 6.7 KVA Features: Color: Newly painted light grey + tele grey New control cabinet New APC910/2 control unit (Win10) MF30 V2.8 operating interface New B&R drives with Endat interface Touch screen display Exopuls+ 60A Rev.4 generator 5-fold tool changer Touch guard operable by button Linear scales on all axes X, Y, Z (Fagor) 2 cartridge filters Termogamma chiller Completely new machine installation New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve manifold CO² extinguishing system C-axis Hirschmann 50 rpm, holding brake overhauled Handheld control panel with enabling button Automatic tracking lowering tank Chuck: Erowa IST, Hirschmann, 3R 12 months warranty Transport On-site commissioning Training

Kondisi: bekas, Tahun pembuatan: 2019, Turning diameter: 400 mm Turning length: 584 mm Swing diameter over bed: 750 mm Control: Siemens 828 D ShopTurn Spindle bore: 81 mm Spindle speed: 3,500 rpm Spindle drive: 18.5/22 kW Hfedpoww Nazsfx Aa Neb Spindle torque: 410 Nm Number of tools in turret 1: 12 BMT 65 of which driven: 12 BMT 65 Driven tool speed: 5,000 rpm Milling spindle drive: MK 5 kW y-axis: +/- 60 mm Rapid traverse: 30/30/10 m/min Tailstock: MK 5 Dimensions (L x W x H): 4.6 x 1.9 x 2.1 m Machine weight: approx. 6.65 t Flat-bed CNC lathe with driven tools and y-axis Equipment: - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box in door - Signal lamp - 2 + 2 driven tool holders - Various static tool holders - Flat guideways - Tool measurement arm - Programmable tailstock - 23 bar coolant system - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual-pressure clamping system

Kondisi: bekas, Tahun pembuatan: 2008, X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Control: SINUMERIK 840D Powerline Spindle speeds – infinitely variable: 1 – 8,000 rpm Drive power at 40% duty cycle: 28.00 kW Spindle diameter at front bearing: 80.00 mm Spindle taper: HSK-A100 B-axis: 187° Feed rate X/Y/Z axis: 15,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Feed force X/Y/Z axis: 10,000 N B-axis rapid traverse: 11.20 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360.000 x 0.001° Table speed range: 1 – 500 rpm Tool magazine: chain magazine for 120 tools Tool diameter: 100 mm Tool diameter with 2 free adjacent spaces: 160 mm Max. tool length: 350 mm Hjdpfjw Df A Sex Aa Njfb Max. tool weight: 10.00 kg Total connected load: 60.00 kW Machine weight approx.: 13.00 t Installation dimensions approx.: 7.40 x 5.30 x H3.50 m Equipped with Siemens SINUMERIK 840D control, tool taper cleaning, tool breakage monitoring, coolant system with 2 pressure stages (40 bar / 80 bar), chip conveyor, operation mode 4, extraction system.