Kompresor sekrup R37IE-A

Ingersoll-Rand R37IE-A

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. Fpsdpfx Aohzbipeagod - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox Fpjdpfx Ajw Ephbeagod - Number of spindle speed ranges: 2 LINEAR AXES - Travel path X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed rate (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel path: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5,000 [kg] - Distance from table center to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2,500 [mm] - Max. workpiece height: 1,850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] OPERATING HOURS - Operating hours: 15,446 [h] ACCESSORIES - Control: Fanuc 31i-model B5 - Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * Internal coolant supply (IKZ) * with paper filter * with coolant chiller * with rinsing gun * with cabin wash - Chip conveyor - Spindle cooling - Tool probe system - Workpiece probe system: Renishaw RMP60 - Tool breakage monitoring: SOFT AC - Number of pallets: 2 - Vice - Tool holders

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), A compressor system from plant manufacturer Rico, comprising two Atlas Copco compressors, two refrigeration dryers, and an oil-water separator system (Beko), also from Atlas Copco, is available. 1) Atlas Copco GA 45 VSD+ screw compressor, year of manufacture: 2020, air flow: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200 mm / 1100 mm / 2000 mm, weight: approx. 860 kg. 2) Atlas Copco GA 45 VSD FF screw compressor, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x Atlas Copco FX 15 refrigerated compressed air dryers, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant charge: 2050 g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900 mm / 750 mm / 1000 mm, weight: approx. 160 kg. 4) Atlas Copco Equalizer 4.0/ES6-MK5 compressor management system, control capacity: 2–6 compressors. 5) Beko ÖWAMAT 15 oil-water separator, throughput capacity range: 6 m³–30 m³/min, oil outlet: DN40, tank volume: 115.5 l, filling volume: 84.3 l, oil collection container: 2x10 l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100 mm / 550 mm / 800 mm, weight: approx. 40 kg. Plant operating hours: 8,656 h, controller hours: 42,334 h. Documentation available. On-site inspection possible. Fpsdpoxdc Uvefx Aagod

Kondisi: siap digunakan (bekas), CAP30 APPLICATOR 1000 HELICAP23: Tahun Pembuatan: 2016 Versi: 300V Jam Operasi: 15.600 Harga: 150.000 EUR FCA Polandia Mesin beroperasi hingga 20 September. Kondisi sangat baik Kondisi sangat baik, siap untuk dikirim. Fsdpfx Aajw Nqn Njgjpd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.275 mm, diameter pembubutan: 481 mm, daya motor spindle: 26 W, kecepatan spindel (min.): 20 rpm, kecepatan spindel (maks.): 2.800 rpm, lubang spindel: 102 mm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 1.350 mm, gerak cepat sumbu X: 24 m/menit, pergerakan cepat sumbu Z: 30 m/menit, jenis arus masuk: tiga fasa, tinggi total: 2.110 mm, panjang total: 4.636 mm, lebar total: 2.035 mm, hidung spindel: ASA 11, berat keseluruhan: 6.900 kg, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Mesin bubut CNC bekas 2 sumbu "DOOSAN model PUMA GT3100L" dengan CNC FANUC 0i-TF, lengkap dengan konveyor serbuk model sabuk dan berbagai alat statis. Fpsdpfx Aajx N R E Aogod

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 15.000 h, Penggerak Utama Rentang kecepatan spindle: 12000 rpm Taper alat: Capto C6 Jumlah sumbu: 5 Pergerakan Pergerakan sumbu-Y: 230 mm Pergerakan sumbu-A: 1550 mm Benda Kerja Diameter benda kerja di atas alas: 1000 mm Pusat bubut-milling 5-sumbu DOOSAN Puma MX2600ST ini diproduksi pada tahun 2013. Memiliki diameter turning maksimum Ø 760 mm, panjang benda kerja hingga 1540 mm, serta kapasitas batang Ø 76 mm. Dilengkapi kendali Fanuc 31i-A, dua spindle dengan kecepatan hingga 4000 rpm, dan spindle milling hingga 12.000 rpm. Termasuk majalah alat dengan 80 posisi dan konveyor serbuk. Jangan lewatkan kesempatan untuk membeli pusat bubut-milling DOOSAN Puma MX2600ST ini. Hubungi kami untuk informasi lebih lanjut. Tipe Aplikasi Fjdpfex E Eamjx Aagepd Pembubutan

Kondisi: baik (bekas), Tahun pembuatan: 2008, Ukuran meja 1600 x 750 mm, kapasitas muat meja 1.500 kg, pergerakan XYZ 1525 x 762 x 625 mm, kecepatan gerak cepat 24 m/menit, daya spindle 18,5 kW, kecepatan spindle 6.000 rpm, ATC 40 stasiun, taper spindle BT50, pendinginan melalui spindle, konveyor serpihan, kontrol Fanuc 21i. Fpsdpfx Aasxwytcogjd

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Cutting length: 1060 mm Fodpfx Asua Iuloagepd Cutting angle: 2° Strokes per minute: 50 strokes/min Motor power: 4.0 kW Machine weight approx. 0.67 t Motorized Guillotine Shear Type 165.03 Technical data: Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Approx. stroke rate: 50/min Cutting angle: 2° Hold-down opening width: 5 mm Factory setting for blade clearance: 0.1 mm - Digital display for back gauge - Front table support - Operating manual available

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 78.572 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 410 mm, jarak gerak sumbu Z: 450 mm, kecepatan pemakanan sumbu X: 500.000 m/menit, laju pemakanan gandar Y: 50.000 m/menit, laju pemakanan sumbu Z: 50.000 m/menit, berat keseluruhan: 12.000 kg, Special machine accessories 1. Expansion of the tool magazine from the standard 30 tools to 210 tools, including preparation for 240 1. Rotary pallet storage for 10 pallets, including setup station Number of pallets: 10, Pallet size: Ø130 mm, Pallet interface: Capto C6 Max. workpiece size: Ø250 x H 250 mm Max. workpiece weight: 40 kg Pallet clamping force: 22.5 kN 1 HSC main spindle, 40 – 20,000 rpm, with 7.5/11 kW motor, Maximum spindle torque: 70 Nm up to 1,500 rpm, Including weekly time switch for initiating spindle warm-up cycle and automatic machine shutdown 1 Spindle interface HSK 63A 1 Direct measuring system (Heidenhain) in X, Y, and Z axes, supplied with purge air 1 KNOLL coolant system, consisting of: 1 Scraper belt chip conveyor with lift pump and chip discharge to operator side 1 Through-spindle coolant supply with coolant pump KTS25-50T, output 24 l/min at 70 bar, 5.5 kW Coolant pressure adjustable in 3 stages 1 External coolant system with coolant pump, output 100 l/min at 1.4 bar 1 Coolant shower with coolant pump, output 100 l/min at 1.4 bar 1 Compact filter KF200, filter capacity 200 l/min System dimensions L x W x H approx. 1.8 x 1.1 x 1.0 m Tank capacity approx. 1,400 liters 1 VWK 90 - D emulsion recooling unit Cooling capacity: 11.5 kW Ambient temperature up to 42°C Refrigerant: R407c 1 Coolant spray gun in work area including pump and electrical installation 2 Spiral chip conveyors 1 TEBARON mechanical air filter TEB/BV2 for extraction of emulsion, oil mist, and fumes, consisting of: 3-stage pre-filter package 1 HEPA filter according to DIN EN 603335-2-69 tested with BIA certificate, separation efficiency > 99.995% for particles ≥ 0.3μ Fulfills requirements for use category K1/K2 (carcinogenic substances and pathogens) as well as dust class H 1 Single post with base plate for ISI TEB/BV2 air filter 1 RENISHAW OMP 60 probe for automatic workpiece zero-point setting and measurement, insertable into spindle via tool changer: Including EASY PROBE SOFTWARE Fedpoxwm Adefx Aagjpd Pressure transducer for tool length measurement and tool breakage monitoring Special accessories for the control 1 Increase in number of workpiece coordinate systems from 6 to 54 1 Coordinate system rotation G68/G69 1 Edge chamfering and rounding 1 Automatic zero-point tracking 1 Recovery to contour 1 Expansion of macro variables from standard 100–149, 500–549 to 100–199, 500–999 1 IZ2/150NF HSC precision control for simultaneous 5-axis machining, consisting of: - Fast Data Server function - High-Speed Precision Contour Control - Nano Smoothing - Dynamic zero-point tracking, up to 8 different zero points available (G54.2) - TCPC Tool Center Point Control for 5-axis simultaneous milling (G43.4/G49) - Swivel cycle enabling machining on an inclined working plane (G68.2/G53.1/G69)

Tahun pembuatan: 2001, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, With safety system for solvent-based substances according to DIN 1539 including exhaust air fan, supply air cage filter, as well as concentration monitoring and recirculating air filter wall inside the chamber. Fedovcb U Aopfx Aagspd Completely overhauled, 12 months warranty - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 300°C - Eurotherm controller 2404 (20 programs, each with 16 segments) - Eurotherm recorder - Connected load: 29 kW - 6 wire shelves included, as well as V2A support angles - Minimum exhaust air flow: 360 m³/h - Maximum allowable solvent quantity: 36g at nominal temperature of 300°C - With concentration measurement - Window seals renewed - Net weight approx. 1200 kg - Including documentation, CE declaration Inspection at our warehouse by appointment. We offer new and used industrial ovens. Contact us! Oven, ovens, drying oven, kiln, heat oven, heated cabinet, industrial oven, paint dryer, tempering oven, heating oven, annealing oven, hot air oven, drying cabinet, chamber oven, curing oven, recirculating drying cabinet, recirculating oven, solvent oven.