Majalah pemuatan batang

IRCO Profimat 65.8/270.8

Kondisi: baru, Saw blade diameter: 370 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) - Mitre cuts: left 60° / right 45° - Hydro-pneumatic saw unit control - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer Chsdpfjd Iin Hex Anzsb - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price: €204)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2023, jam operasional: 813 h, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 900 mm, kinerja area: 5.700 m²/jam, berat keseluruhan: 957 kg, kapasitas tangki air: 200 l, tegangan baterai: 36 V, 1 Chsdjxx Ta Eopfx Anzob

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Tank capacity: 775 l, max. batch weight: 100 kg, heating power: 26 kW, max. temperature: 75°C, basket dimensions (X/Y/Z): 660 mm / 480 mm / 338 mm, fine filtration tank 1/2: 100 µm / 50 µm. Machine dimensions (X/Y/Z): approx. 1850 mm / 1400 mm / 1800 mm, weight: approx. 950 kg. The machine was overhauled in 2024 and has not been used since. Includes basket rotation with swivel drive, automatic water filling, and oil separation with a coalescence separator unit and oil collection container. Documentation available. An on-site inspection is possible. Chedjwr Dxhepfx Anzjb

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 510 mm, panjang pembubutan: 752 mm, diameter pembubutan: 390 mm, kecepatan spindel (maks.): 4.000 rpm, gerak cepat sumbu X: 18.000 m/menit, pergeseran cepat sumbu Y: 24.000 m/menit, pergerakan cepat sumbu Z: 24.000 m/menit, kecepatan pemakanan sumbu X: 18.000 m/menit, laju pemakanan sumbu Z: 24.000 m/menit, MORI SEIKI ZL-2035MC CNC Lathe – Technical Specifications The MORI SEIKI ZL-2035MC is a high-precision CNC lathe, ideal for advanced multi-axis turning operations, equipped with twin spindles and powered turrets. Manufactured in December 2002, it is engineered to deliver productivity and accuracy in complex machining. General Features Brand: MORI SEIKI Model: ZL-2035MC Category: CNC Lathe Year of manufacture: 12/2002 CNC Control: MORI SEIKI MSG-501 Machine weight: 5,900 kg Machine Dimensions: Length: 4,350 mm Width: 2,400 mm Height: 2,200 mm Machining Capacity Max swing over bed: Ø 680 mm Max swing over carriage: Ø 510 mm Distance between centers: 752 mm Max turning diameter: Spindle No.1: Ø 390 mm Spindle No.2: Ø 294 mm Max turning length: 520 mm Bar capacity: Ø 65 mm (Ø 51 mm on No.2) Axis Travels X-Axis: No.1: 235 mm No.2: 175 mm Z-Axis: No.1: 520 mm No.2: 490 mm B-Axis: 505 mm Main Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-6 Chuck diameter: Ø 210 mm Minimum programmable C-axis increment: 0.001° Motor power (continuous/30 min): 11 / 7.5 kW Chsdpfoxd Td Uex Anzsb Sub-Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-5 Chuck diameter: Ø 160 mm Minimum programmable C-axis increment: 0.001° Motor power (continuous/30 min): 7.5 / 5.5 kW Tool Turrets Turret No.1 Number of stations: 12 Driven stations: Yes Driven tool speed: 4,000 rpm Turning/boring tool size: 25x25 mm / Ø 32 mm Turret No.2 Number of stations: 8 Driven stations: Yes Driven tool speed: 3,000 rpm Turning/boring tool size: 25x25 mm / Ø 32 mm Feed Rates Rapid traverse X-axis: 18,000 mm/min Rapid traverse Z-axis: 24,000 mm/min Rapid traverse B-axis: 24,000 mm/min Manual feed X / Z / B axes: 0 – 1,260 mm/min Included Accessories 5 driven toolholders and various fixed toolholders Chip conveyor Transformer Part ejector arm Coolant tank with pumps Manuals, electrical diagrams, and CE Declaration

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 32.870 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6030578, diameter pembubutan: 32 mm, kecepatan spindel (maks.): 8.000 rpm, Diameter batang (maks.): 32 mm, We offer for sale a Traub TNL26K automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Cjdpfxovldx Ae Anzohb Coolant compact band filter: Resy The machine comes with a large number of both static and driven tool holders—the list is shown in the attached photo.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis Travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2-axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2-axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and Sub Spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: infinitely variable / infinitely variable Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Draw tube bore: 66 mm / 52 mm C Axes: Smallest input increment: 0.001° Smallest command increment: 0.001° Max. indexing speed: 600 rpm Feed rate: 1–4800 mm/min C-axis clamping: disc brake C-axis positioning time: 1.5 s Upper/Lower Turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Tool size square: 25 mm Tool size round shank: 32 mm Driven tools: Drive system: individual drive Spindle speed: 6000 rpm / 3600 rpm Speed range: infinitely variable Number of tool stations: 12 × 2 Collet size: ER32 Tool holder capacity straight: 2 mm – 20 mm Tool holder capacity cross: 2 mm – 20 mm Drive Power and Torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Floor space required: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as per photo documentation includes, among others: Nakamura lathe, tool holders (driven and static), collets, complete machine documentation, gantry loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is provided for the correctness, completeness, or timeliness of the information provided. Chedpfx Anjy Ipp Rezob

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° Chjdpfx Aeyw H Szjnzeb SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power rating: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle installed as of 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts belt conveyor

Kondisi: bekas, TECHNICAL SPECIFICATIONS Cedpfsv Ig Avox Anzjhb - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X travel: 350 mm - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bras charger - Number of magazine tools: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts removal

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 30,000 rpm LINEAR AXES - Travel X/Y/Z axes: 450/270/310 mm - Rapid traverse speed (X/Y/Z): 75 m/min SWIVEL AXIS B Codpfx Aneuhbr Tszjhb - Travel: -20/+90 degrees - Minimum resolution: 0.001 degrees TOOL CHANGER - Tool changer type: Parapluie (umbrella-type) - Number of tools in magazine: 40 TURNING SPINDLE - Spindle speed: 8,000 rpm - Max. bar diameter: 32 mm - Minimum resolution C-axis: 0.001 degrees - Travel: 360 degrees ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1,500 x 2,600 mm - Machine height: 2,300 mm - Machine weight: 2,850 kg MACHINE HOURS ACCESSORIES - Control: Siemens 840 D - 3-color status light

Kondisi: bekas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle head strokes (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of live tool positions on the turret: 6 - Max. diameter at subspindle: 12.7 [mm] - Subspindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] Csdpfx Anjuhav Dezjhb EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and subspindle - Brake for main spindle and subspindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various static and driven tool holders