Truk dengan bodi yang dapat diganti

iveco STRALIS AS 260 S42 Y/FS-CM ECO LBW AHK KLIMA INTARDER EURO-5 - Lenkachse

Kondisi: bekas, Filling capacity - 150 l Agitator - 0.75 kW Vessel diameter - 800 mm Overall height - approx. 270 cm Filling opening - approx. 35 cm Outlet - approx. 20 cm Outlet tap - inch thread Smoke pipe - approx. 18 cm Fuel - wood steam Dkjdpfexytwasx Adgsg

Kondisi: baik (bekas), jarak tempuh: 401.000 km, Tahun pembuatan: 2011,

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), This is a complete production line for house construction. Prices are listed for each individual item. Consisting of the following components (see the attached document as well): Images to follow; they are already included in the attached document. Table 1 (Laying in and clamping the frame construction) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Laying the first facing layer and fastening) €25,300 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying the second facing layer, fastening, and flipping the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical components and insulation) €34,500 - Cross transport with rollers and facing layer - Table cross travel - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first facing layer and fastening the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying the second facing layer and fastening) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Assembly and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swivel unit Djdpfx Adju D Amgogekg - Table cross travel unit - Upper guide for holding wall elements vertically Manual surface portal with vacuum lifter on Table 2 €13,800 (Laying the first facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 3 €13,800 (Laying the second facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 5 €13,800 (Laying the first facing layer on the second side) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 6 €13,800 (Laying the second facing layer on the second side) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Wall storage rack 1: 12 m long x 24 tracks €11,500 Wall storage rack 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 Abus spreader beam 2 t €20,125 1 spreader beam 2 t

Kondisi: sangat baik (bekas), VK450 2RE log debarker. Equipped with two rotors. One is a stump grinder rotor. The other is a debarking rotor. Minimum-maximum log diameter: 8-45 cm. Minimum log length: 3 m. Comes complete with original VK centering conveyor. Will be sold after complete overhaul. Dkjdpsulv Hzefx Adgog

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 263.300 km, Tahun pembuatan: 2013, Perlengkapan: derek,

Kondisi: bekas, jarak tempuh: 835.837 km, daya: 309 kW (420,12 hp), pendaftaran pertama: 11/2010, jenis bahan bakar: diesel, berat kosong: 9.580 kg, berat muatan maksimum: 16.420 kg, berat keseluruhan: 26.000 kg, ukuran ban: 315/80R22.5, konfigurasi gandar: 6x2, jarak roda: 4.800 mm, bahan bakar: diesel, rem: intarder, warna: kuning, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, suspensi: lain, jumlah tempat duduk: 2, panjang total: 9.480 mm, Tahun pembuatan: 2010, tinggi konstruksi: 3.850 mm, jumlah tempat tidur: 1, Perlengkapan: ABS, kendali jelajah, komputer bawaan, kontrol traksi, kopling trailer, pendingin udara,

Kondisi: baru, Tahun pembuatan: 2023, de Dkedpfx Aeix N N Ijdgeg

Tahun pembuatan: 2000, Kondisi: baik (bekas), Lini besi EWD Combimes. Tahun pembuatan 2000, tipe DK90-TL. Pengumpanan kayu dari kiri. Lebar besi maksimum 500 mm, ketebalan maksimum 120 mm. Motor penggerak 90 kW. Frekuensi siklus dengan kayu 4,0 m sekitar 18 buah/menit. Lengkap dengan sistem kontrol EWD asli. Pengiriman dari konveyor penampung sebelum pemisahan hingga pemisah serpihan termasuk. Lini lengkap dan dalam kondisi baik. Dodpoxcwvxofx Adgekg

Tahun pembuatan: 2023, Kondisi: baru, Große Rohr- und Profil-Laserschneidmaschine. Bis zu Durchmesser. H-Profil bis. 12 Meter Rohr- oder Profillänge. Laser-Kopf je nach Materialstärke. Angebot auf Anfrage. Montage und Schulung inklusive. Dkodpfx Asmxl S Ajdgsg

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Dkjdpfjw Sy T Hex Adgjg Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim