Mesin bor tegak

IXION BST 16 PZ

Kondisi: baru, Tahun pembuatan: 2022, Power output: 1.1 kW Drilling capacity in steel / Continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Number of speed steps: 9 Spindle taper: MT-4 (Morse Taper 4) Quill travel: 120 mm Spindle throat (distance spindle-column): 254 mm Table size: 475 mm x 425 mm Drill table tilting/swiveling: 45° left / 360° Ffodpfx Aegulr Hoagow Column diameter: 80 mm Keyless drill chuck: 1 - 16 mm Weight: 132 kg

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: Fedpfefxyhfox Aagjfw The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: hampir baru (bekas), Mesin bor pilar Gillardon tipe GB 30 V, kecepatan putar 60 - 1800 rpm, feeding otomatis, kondisi sangat baik, dudukan alat MK 3. Ffsdpfxjxpxbce Aagow

Kondisi: sangat baik (bekas), The fully hydraulic high-production rapid bow saw machine is equipped with a universal hydraulic system, allowing for exclusive or alternating cutting of thin- and thick-walled profiles as well as solid materials—without the need to change saw blades—using a uniform tooth pitch of 3 or 4 teeth per inch. Features include preloaded bow guidance, enclosed oil hydraulics, triple pivot mounting, separate coolant system, infinitely variable hydraulic cutting pressure adjustment, lift-off motion and accelerated return stroke, as well as a continuously adjustable mitre device as standard. Rapid feed for raising the saw bow. The pendulum vise ensures optimal utilization of the saw blade. Longitudinal guidance with precision-ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop cut-off. Push-button controls for ON, OFF, and rapid movement of the saw bow. Manufacturer: KASTO Model: PSB 280 U metal bow saw Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per minute Cutting speed: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: hydraulic Cutting range round: 280 mm Cutting range flat: 280 x 150 mm Mitre range: 0–45° Material support height: 600 mm Weight: 650 kg Length/Width: 1500 x 600 mm Height: 1000 mm Fsdpfxoxdwbkj Aagofw Saw blade size: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: coolant system, rapid-feed lowering, rapid-feed raising

Kondisi: baru, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 25 h, tegangan masuk: 380 V, jenis arus masuk: tiga fasa, tinggi total: 1.500 mm, panjang total: 5.200 mm, lebar total: 2.350 mm, berat keseluruhan: 2.500 kg, panjang mata gergaji pita: 520 mm, lebar pita gergaji: 580 mm, Mesin baru. Fsdpfx Aaeunia Hegjfw

Tahun pembuatan: 2001, Kondisi: diremajakan ulang (bekas), Affordable MAZAK Laser Cutting System NTX48 1.5kW Year of manufacture: 2001 Very well-maintained, fully refurbished MAZAK laser machine with 1500W Sheet format: 2500mm x 1250mm Minimal installation area required: 2.6m x 6m Small parts conveyor belt Fully enclosed machine cover Mild steel: up to 12mm Stainless steel: up to 6mm Plastic processing possible Including software Including warranty Including extraction system Including commissioning and training Can be tested under power! Ffjdpfxehturcj Aagew === Optionally available with fully automatic loading and unloading ===

Kondisi: baru, Pizzaofen mit zwei Ebenen, Haube und Gärkammer GMG Backkammer vollständig aus Schamottstein gefertigt Temperaturbereich: 50 bis 400°C Frontseite aus Edelstahl Digitale Steuerung Ober- und Unterhitze separat einstellbar Digitale Überwachung der Ober- und Unterhitze Digitales Fehlermeldesystem Ffsdpfjuu H Alex Aagjw Schwere, temperaturbeständige Tür mit Spannfeder Doppelverglaste Tür für verstärkte Isolierung und Luftzirkulation Außenmaße: 149x110x194 cm Innenmaße: 105x70x15 cm Elektrische Leistung: 2 x 8 kW – 3NAC I 400 V Gärkammer: 149 x 93 x 90 cm – 3 kW und 230 V Gewicht: 500 kg

Kondisi: baru, ROGI SAWING MACHINE TYPE CY355 INVERTER VARIABLE SPEED SEMI-AUTOMATIC Saw Blade Dimensions ----- 3770 x 34 x 1.1 mm Saw Blade Speeds ----- variable 20-80 m/min Motor Power ----- 2.2 kW - 400V - 3 Phase Weight ----- 855 kg Cutting Capacity 90° ----- 355 mm / 490 x 300 mm Cutting Capacity 60° ----- 230 mm / 180 x 220 mm Cutting Capacity 45° ----- 350 mm / 290 x 340 mm Cutting Capacity -45° ----- 290 mm / 250 x 250 mm INCLUDES Saw Blade Workpiece Stop Base Cabinet Saw Blade Tension Manometer Saw Blade Guide with Carbide Inserts Hydraulic Quick-Release Vice Coolant Pump Fodega Tzxjpfx Aagefw Hydraulic Drop Cylinder Motor Protection Switch Automatic End Stop

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 1.530 h, Fungsionalitas: berfungsi sepenuhnya, daya: 129 kW (175,39 hp), Dijual Arjes Impaktor 250 EVO Tahun pembuatan: 10/2022 Fsdew Nyt Ijpfx Aagefw Jam operasional: 1530 Dilengkapi dengan poros dayung untuk kayu, plastik, limbah industri, dll. Poros beton juga termasuk. Mesin dalam kondisi fungsional penuh dan dapat diperiksa saat beroperasi.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0000025, tinggi pusat: 315.425 mm, berat benda kerja (maks.): 3.000 kg, panjang penggilingan: 3.000 mm, diameter roda gerinda: 750 mm, lebar total: 2.700 mm, panjang total: 11.000 mm, tinggi total: 2.200 mm, diameter penggilingan: 630.850 mm, berat benda kerja di antara senter: 3.000 g, jarak antara pusat: 3.000 mm, lebar roda gerinda: 100 mm, panjang umpan sumbu Z: 3.300 mm, kecepatan spindle penggilingan: 1.000 rpm, berat keseluruhan: 17.000 kg, kecepatan rotasi (min.): 2 rpm, kecepatan rotasi (maks.): 250 rpm, masa garansi: 24 bulan, gerak cepat sumbu X: 3 m/menit, pergerakan cepat sumbu Z: 6 m/menit, tegangan masuk: 400 V, kecepatan maksimum spindel benda kerja: 250 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Cylindrical grinder BUC63/3000 CNC, new, in 100% condition, equipped with a Sinumerik ONE or INTRONIX TOS CNC control system. Fedpsu U Ewgsfx Aagofw It can be optionally equipped with a SUPFINA superfinishing attachment, or with a grooving device for rubber or plastic rollers.