Derek bergerak
JMG MC25S

Kondisi

Baru (berfungsi sepenuhnya)

Lokasi

Kraków

Data mesin

Nama mesin:: Derek bergerak

Pabrikan:: JMG

Model:: MC25S

Kondisi:: baru

Fungsi:: berfungsi sepenuhnya

Harga & Lokasi

Lokasi:: Rybitwy 15, 30-722 Kraków, Polska

Hubungi

Rincian teknis

Jenis bahan bakar:: listrik

Berat keseluruhan:: 2.500 kg

Berat muatan maksimum:: 2.500 kg

Tipe tiang:: telescopik

Rincian penawaran

ID iklan:: A19378581

Pembaruan:: terakhir pada 23.06.2026

Deskripsi

Self-propelled battery-powered crane from the renowned Italian manufacturer JMG, model MC25S with radio control, offering a lifting capacity of 2,500 kg.

Brand new unit, available for viewing.
Official distributor, 12-month warranty.

CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3
EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments.
REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments.

WHEEL DRIVE: Electric
BOOM DRIVE: Hydraulic
POWER SUPPLY: Electric battery
MAXIMUM LIFTING CAPACITY: 2,500 kg
CRANE WEIGHT: 2,500 kg
Bodpfx Ajwtppzjpcoli
BOOM LIFT ANGLE UP: 60°
BOOM LIFT ANGLE DOWN: -15°
FRAME: Designed and manufactured by JMG. Box-type, torsion-resistant frame constructed from high-strength structural steel.
BOOM: Made from high-quality steel plate, formed and welded. Consists of the base section, hydraulic telescopic system, and a mechanical extension. Boom tilt and extension are hydraulically controlled by telescopic cylinders.
DRIVE MOTOR: 2 electric motors, 2 kW, 24 V AC, insulation class H
PUMP MOTOR: Electric motor 3 kW, 24 V DC, insulation class H
PROPULSION: Electronic speed control, MOSFET type
BATTERY: 24 V 420 Ah, with charge indicator
POWER TRANSMISSION: Front axle driven by 2 gearboxes
WHEELS: Front: super-elastic, 18x7-8", 2 units; Rear: super-elastic, 15x4 ½-8", 2 units
BRAKES: Automatic brakes on front wheels
STEERING: Rear wheel steering via electric motor. Max. steering angle ± 90°
CONTROLS: Operated via radio remote control
HYDRAULIC SYSTEM: Driven by low-noise 3 kW gear pump. Cylinders operated by electro-proportional valve block with radio remote control. Filter and safety valve. Max. working pressure 22 MPa.
SAFETY DEVICES: Electronic load moment indicator and limiter

STANDARD EQUIPMENT:
• Maximum capacity 2.5 t
• Front-wheel drive via 2 reducers (one per wheel)
• Hydraulic telescopic boom (1 fixed section, 2 telescoping sections)
• Manual mechanical boom extension
• Battery set 24 V 420 Ah
• Stationary battery charger
• Work lights
• Warning beacon
• Fire extinguisher
• Radio remote control for boom and drive wheels
• Electronic CE-compliant load indicator and limiter
• Boom tilt angle +60° / -15°
• CE conformity declaration
• Operating manual, technical documentation, declarations

INSTALLED OPTIONAL EQUIPMENT:
• 2.5 t hydraulic winch
• Non-marking tyres
• Battery water replenishment system
• On-board mobile charger
• Manual 3-position jib (1.0 t)

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2025

2 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+48 696 4... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Crailsheim

11.089 km

Derek
JMGMC 25S

Hubungi

Kondisi: baru, panjang total: 2.910 mm, Tahun pembuatan: 2025, kapasitas angkut: 2.500 kg, - Tyres: Solideal, solid rubber, grey, type Magnum Blsdjxpx Rwepfx Apcji - Tyre size: front 18x7-8, rear 15x4.5-8 - Wheelbase: 1,635 mm - Ground clearance (center): 70 mm - Proportional telescopic boom - Front axle drive with counter-rotating movement - Mobile head (-70° / -35° / 0° / +10°) - Structure for winch and onboard hook - USB port - Maximum lifting capacity: 2,500 kg - Front-wheel drive: No. 2 AC electric motors, 2 kW, 24V, insulation class H - Removable counterweights: 750 kg - Battery: 24 V – 420 Ah, 8 hours operation - Drive wheels: Front: No. 2 super elastic 18x7-8” / Rear: No. 2 super elastic 15x4 1/2-8” - Steering: via rear axle, steering angle -90°/+90° - LMI – electronic load limiter - Automatic braking system on all wheels - Boom angle: +65° / -15° - Electric motor: 3 kW – 24 V AC, insulation class - Manufactured from preformed and welded steel plates - Conforms to EU directives 2006/42/EC, 2000/14/EC, 2014/30/EU, 2014/35/EU – Legislative Decree 262/2002 and subsequent amendments

Lihat detail

Iklan kecil

Tata

10.505 km

Granulator
TRIA 20-15 BL-Tgranulator

€1.650

EXW harga tetap ditambah PPN

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, daya: 1,5 kW (2,04 hp), Tria plastic mill, shredder, granulator in excellent condition for sale Make: TRIA 20-15/BL-T Power: 1.5 kW, 50 Hz, 380 V Year of manufacture: 1997 Feed opening: 200 x 230 mm Rotating knives: 3 pcs Bsdpfx Apora N A Njcoli Fixed knife: 1 pc Discharge opening: 60 mm Final product size: 3–5 mm Throughput: approx. 30 kg/h.

Lihat detail

Iklan kecil

Ratingen

11.266 km

Derek seluler
JMGMC 25S

Hubungi

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 4 kW (5,44 hp), jenis bahan bakar: listrik, warna: perak, berat keseluruhan: 2.460 kg, tipe tiang: telescopik, Tahun pembuatan: 2022, jam operasional: 21 h, nomor mesin/kendaraan: 0943, Small, compact, and highly maneuverable—these are the key advantages of our 2.5-ton electric mobile crane. Nonetheless, there is no doubt that it moves "big things": with a maximum lifting capacity of 2,500 kilograms, the crane delivers full performance. The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk marks. The crane’s 2 kW electric motor responds with precision and operates for 8 hours without the need for recharging, thanks to a powerful 24 V, 420 Ah battery. The boom can be extended proportionally and, on request, can be additionally lengthened using a jib. JMG MC 25S - Load capacity: 2,500 kg - Net weight: 2,460 kg - Width: 900 mm - Height: 1,600 mm Bjdew S Ii Nspfx Apceli - Drive type: Electric - Power: 4 kW - Tires: Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights - Battery: 24 V 420 Ah - Automatic brake system - Front-wheel drive – 2 gears - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle: +60° / -15° - Ground clearance: 70 mm - Front tires: 18 x 7-8 - Rear tires: 15 x 4.5-8 - Operating manual - Electric motors – insulation class H

Lihat detail

Iklan kecil

Sistem pemotongan oxyfuel / plasma Eckert Cutting Technology Jantar

Rennerod

11.199 km

Sistem pemotongan oxyfuel / plasma
Eckert Cutting TechnologyJantar

Hubungi

Kondisi: baru, The Jantar is the most popular model in the Eckert machinery lineup, valued for its dynamic performance and efficiency. It is widely used by both large industrial enterprises and medium-sized companies seeking an economical yet reliable solution. The Jantar plasma cutting system can be equipped with both plasma and oxy-fuel cutting systems, as well as a range of extensive accessories (marking, drilling, and processing of pipes and profiles). The machine’s construction has been optimized over years for maximum reliability, as confirmed by hundreds of customers throughout Europe. Key Features • Attractive pricing for a well-equipped base version • High-dynamic, precise cutting for 2D applications, pipes, and profiles • Cutting capacity from 0.5 mm up to 100 mm material thickness • Extensive database with predefined cutting parameters • Option to flexibly extend the length of the working area Technical Data Drive AC Servo Available Working Widths 1,500; 2,000; 2,500; 3,000 mm Available Working Lengths Any length starting from 1,500 mm Positioning Speed 25,000 mm/min Cutting Thickness up to 100 mm Cutting Quality DIN-EN ISO 9013 Positioning Accuracy DIN-EN 28206 Repeatability DIN-EN 28206 Electrical Systems DIN-EN 81346 Safety Module DIN-EN 13850 Bledpfef Alb Aox Apcoi Working Height 740-760 mm Operating Temperature +5 °C to 45 °C Operating Humidity max. 90%

Lihat detail

Iklan kecil

Kontainer Instalasi Kontainer Container 142m² Bürocontainer Container

Rosenheim

10.962 km

Kontainer Instalasi Kontainer
Container 142m²Bürocontainer Container

Hubungi

Iklan kecil

Herscheid

11.207 km

Mesin kawat EDM
MitsubishiMV 2400 R

Hubungi

Iklan kecil

Cascina Faustina

11.244 km

EROSI LISTRIK KAWAT
FANUCALFA 1-iC

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Used FANUC ALFA 1-iC Wire EDM Machine Blodjxd R Hmspfx Apcji The used FANUC ALFA 1-iC wire EDM is a medium-sized, 5-axis CNC erosion machine featuring submerged operation. It offers X, Y, Z travels of 550, 370, and 410 mm respectively. Manufactured in 2004 to CE standards, this model comes equipped with automatic wire threading, chiller unit, and an opening roof. Technical Specifications of FANUC ROBOCUT ALPHA 1iC Wire EDM: - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm - Maximum workpiece weight: 1,000 kg - CNC Control: Fanuc Series 180is-WB - Number of axes: 5 (X, Y, Z, U, V) - Axis travel (X/Y/Z/U/V): 550/370/410/120/120 mm - Rapid traverse on X, Y, Z axes: 900 mm/min - Rapid traverse on U, V axes: 450 mm/min - Table dimensions (L x W): 780 x 600 mm - Maximum cutting angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Power supply: 400 V; 50/60 Hz - Total power requirement: 13 kW - Total machine weight: 3,100 kg

Lihat detail

Iklan kecil

Kozy

10.429 km

Mini crane perayap TB5000
BefardTB5000

€51.139

EXW harga tetap ditambah PPN

Hubungi

Kondisi: baru, Tahun pembuatan: 2026, Mini crane on crawler chassis TB5000 Mini crane on crawler chassis for indoor and outdoor applications. Maximum load capacity: 2,400 kg. * Radio remote control – driving, operation, outriggers * Dual power supply – diesel and 230 V electric * Maximum load capacity – 2,400 kg * Standard overload protection system * Maximum horizontal outreach over 11 m Bedpfx Ajibqrajpcsli * Four hydraulic extensions + 1 manual extension * Maximum vertical reach over 13 m * 4 hydraulically lowerable supports * Weight approx. 2,200 kg * Height approx. 195 cm * Width approx. 88 cm * Active boom angle 16 degrees Additional optional equipment: * Search hook * Hydraulic winch, 990 kg * Operation with lithium-ion battery * Pads for support legs * Hydraulic fly jib Available in the color of your choice.

Lihat detail

Iklan kecil

Terrassa

11.882 km

Rotary vane vacuum pump
EDWARDSE2M30

Hubungi

Iklan kecil

Mengisi bunker dengan pengumpan getaran bunker Bofar VB10,5

Nederweert

11.340 km

Mengisi bunker dengan pengumpan getaran bunker
BofarVB10,5

Hubungi

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 5 kW (6,80 hp), jenis bahan bakar: listrik, berat kosong: 4.200 kg, Tahun pembuatan: 2024, filling hopper with discharge chute hopper capacity 10.5 m³ Blodjuqynmopfx Apcsi S355 / St52-3 vibrating chute with 10mm Hardox 450 wear plate chute fully stress-relieved annealed 2 x unbalanced motors 2.5 kW each NEW

Lihat detail

Beriklan di sini

Derek bergerakJMG MC25S

Data mesin

Harga & Lokasi

Rincian teknis

Rincian penawaran

Deskripsi

Penyedia

Kirim permintaan

Telepon & Faks

Derek bergerak
JMG MC25S