Hydraulic punch, frame for installing punching units, hydraulic hole punch, hydraulic press.

JOKA + HAWE HP-S -- SW 20

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 300 h, gaya penjepit: 400 kN, berat keseluruhan: 2.180 kg, produsen pengendali: ARBURG, model controller: SELOGICA direct, Mesin cetak injeksi hidrolik, tahun pembuatan 2019. Arburg ALLROUNDER 270 C 400-100 ini memiliki gaya penguncian 400 kN dan langkah pembukaan 350 mm. Mesin ini memiliki tekanan injeksi maksimum 2500 bar dan berat injeksi hingga 29 g. Jika Anda mencari kapasitas cetak injeksi berkualitas tinggi, Anda dapat mempertimbangkan Arburg ALLROUNDER 270 C 400-100 yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. - Pengendali: SELOGICA direct - Gaya penguncian: 400 kN - Gaya pembukaan: 130 kN - Langkah pembukaan: maks. 350 mm - Tinggi penjepitan cetakan (min.): 200 mm - Jarak pelat (maks.): 550 mm - Jarak antara kolom (L x W): 270 x 270 mm - Dimensi pelat cetakan (L x W): maks. 446 x 446 mm - Berat setengah cetakan yang bergerak: maks. 180 kg - Gaya pengeluaran / langkah: maks. 30 kN / 125 mm - Waktu siklus kering (EUROMAP): 1,2 – 189 s-mm - Ukuran unit injeksi: 100 - Diameter sekrup: 20 mm - Panjang sekrup efektif (L/D): 25 - Langkah sekrup: maks. 100 mm - Volume langkah yang dihitung: maks. 31 cm³ - Berat tembakan (PS): maks. 29 g - Laju alir material (PS / PA6.6): maks. 5,5 kg/jam / 2,8 kg/jam - Tekanan injeksi maks.: 2500 bar - Tekanan penahanan maks.: 2500 bar - Kecepatan injeksi maks.: 64 cm³/s - Torsi sekrup maks.: 120 Nm - Gaya penekanan nosel / langkah tarik: maks. 50 kN / 180 mm - Daya pemanas: 4,95 kW - Kapasitas corong: 1,8 l - Tegangan operasi: 400 V 3~ 50 Hz - Tegangan kontrol: 230 V ~ 50 Hz / 24 V DC - Arus nominal motor / pemanas: 42 A / 11 A - Total arus nominal: 53 A - Total daya yang terhubung: 29 kW - Daya motor pompa: 11 kW - Volume oli hidrolik: 165 l - Berat bersih mesin: 2.180 kg Rcodpszvm Azofx Adcjh

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, jam operasional: 9.300 h, kapasitas angkut: 3.500 kg, tinggi angkat: 4.700 mm, pengangkatan bebas: 1.500 mm, pusat beban: 500 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.200 mm, tipe perpindahan gigi: otomatis, tegangan baterai: 80 V, berat baterai: 1.580 kg, panjang garpu: 1.150 mm, kondisi ban: 95 persen, Tipe ban depan: ban superelastis (hitam), tipe ban belakang: ban superelastis (hitam), berat kosong: 6.400 kg, tinggi total: 2.200 mm, Perlengkapan: garpu palet, geser samping, kabin, kopling trailer, pencahayaan, riwayat servis lengkap, Dijual forklift listrik Toyota bekas tipe 8FBMT 35 tahun pembuatan 2018 dengan tiang Triplex free lift! Tinggi konstruksi: 2,2m Tinggi angkat: 4,7m Kapasitas angkat: 3500kg Ban full karet 95% Side shifter hidraulik Panjang fork 115cm Termasuk charger Pada forklift sudah dilakukan overhaul pada dua motor penggerak dan as roda belakang, serta baterai juga sudah diganti baru! Forklift tersedia segera! Forklift siap langsung digunakan! Forklift dapat dilihat dan diuji coba di tempat kami! Transportasi dapat diatur sesuai permintaan! Rcedpexzr E Eofx Adcoh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, 1 Rjdpfsxlcpvex Adcsch

Kondisi: bekas, Mischwolf Lochscheibendurchmesser: 130 mm Durchsatz abhängig von Materialart, Geschwindigkeit und Schneidsatz Leistung: bis zu 3.000 kg/h Hauptantriebsleistung: 8,5 kW Stromversorgung: 380 V, 50 Hz Maschinenabmessungen in cm: Breite: 80 Länge: 130 Höhe: 130 Trichtervolumen ca. 300 Liter (Mischkapazität je nach Fleisch bis zu 200 kg) Schnecke, Schneckenhaus und Verschluss komplett aus Edelstahl Lieferzeit: 10 Werktage nach Vorauszahlung Rcodpshzcg Nofx Adcsh

Tahun pembuatan: 2026, Kondisi: baru, AL-KO sanding table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table range. It is certified according to GS-HO-11 and carries the "Wood Dust Tested according to BGI 739-1" seal. This makes it suitable for manual sanding work as well as for processing workpieces with handheld machines. The sanding table is made of galvanized steel sheet. The extraction tray is aerodynamically optimized. The funnel-shaped design of the tray with an integrated air duct directs airflow efficiently to the extraction nozzle. Connection to the on-site extraction system can be made, depending on the required extraction capacity, via either a 140 mm or 160 mm diameter connection nozzle. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grilles are air-flow optimized towards the suction port, ensuring optimal extraction performance. For cleaning the inside of the sanding table, the beech wood slatted top can be removed and the air duct can be detached by loosening a few screws. The sanding table is delivered pre-assembled; only the legs need to be mounted and adjusted to the desired working height. Your benefits: • Accessible from all four sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long edges for edge sanding • Workpiece-protecting removable beechwood slatted top • Funnel-shaped airflow to the extraction nozzle Technical data: • Extraction nozzle: 140 / 160 mm • Required extraction capacity: 1,500 m³/h Rcjdofyadbspfx Adcsh • Negative pressure at the nozzle at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Working height adjustable: 735 – 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Kondisi: bekas, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type: RSD 1500 - 125 Machine no.: 317 / 690 Year of manufacture: approx. 1986 Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Rjdped Swtasfx Adcsch Ram surface: Ø 125 mm Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Hydraulic operating pressure: max. 500 bar - Without hydraulic power unit - Ram surface with 4 threaded holes M16 and 20 mm guide slot, centered centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Required space (L x W x H): 700 x 300 x 1450 mm Weight: 1250 kg Good condition

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 1.500 kW (2.039,43 hp), berat keseluruhan: 1.800 kg, panjang meja: 2.500 mm, lebar meja: 1.300 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, This laser cutting machine is capable of processing sheet metal with a thickness of 3–4 mm. The Wattsan 1325 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It features a working area of 1300x2500 mm. The infeed rollers of the precise Wattsan 1325 E facilitate material handling. The E-Series laser metal machine has a maximum traverse speed of 80 meters per minute. The laser output can reach up to 1.5 kW. The bed is made from steel. For further information, feel free to contact our managers! Wattsan 1325 E Specifications: - Working area: 1300x2500 mm - Laser power: up to 1500 W - Weight: 1620 kg Virmer not only supplies premium machines but also provides service and delivery. Our engineers and managers are ready to answer any questions you have and can offer video support if required. Furthermore, owners of Wattsan equipment benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official distributor for Wattsan. In addition to laser engravers, we also supply metal cutters, welding equipment, marking machines, and cleaning systems. Rsdpfx Ajiicw Esdcech Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years, constantly innovating with the support of its customers. Thanks to this feedback, Wattsan has made over 50 improvements, making the machines more reliable, precise, and efficient—helping you take your business to the next level. YOU CAN WRITE TO US OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK. If you are looking for a suitable laser or CNC milling machine, we are happy to assist. You will find a wide range of laser machines and accessories with us: CO₂ laser machines; metal laser cutting machines; laser metal cutters; fiber metal lasers; fiber metal laser engravers; CNC milling machines for metal; wood milling machines; CNC routers; laser engraving machines; laser engravers; plywood laser cutting machines; laser engravers; metal laser cutting machines; CNC routers; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressors; rotary devices; and mirrors for laser machines.

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), AL-KO Sanding Table AST 1.5 BASIC The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table range. It is certified according to GS-HO-11 and bears the seal “Wood Dust Tested according to BGI 739-1.” YOUR ADVANTAGES - Accessible from all 4 sides - Load capacity up to 150 kg - Manual, tool-free height adjustment with scale - Stepped longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped air guidance to extraction nozzle TECHNICAL DATA AST 1.5 BASIC Extraction nozzle: 140 / 160 mm Required extraction capacity: 1,500 m³/h Negative pressure at the nozzle with 22 m/s: 1,000 Pa at DN140mm / 700 Pa at DN160mm Adjustable working height: 735 – 1,015 mm Working surface (WxL): 946 x 1,500 mm Dimensions (WxL): 1,000 x 1,600 mm Weight: approx. 73 kg Redpedqzhbsfx Adcech

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 47885/05, Pneumatic punching units for window profiles Stroke: 20 mm Rcedpjff Apisfx Adcoh

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), Pneumatic punch Rjdpfoff Apwox Adcech