Pusat pemesinan horizontal

JTEKT Corporation H630SX-I

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 119/020.0895, Asal pabrikasi: Swiss (CH) Tegangan: 400V Dimensi: 2700x2350x2100 mm Berat bersih: 4500 kg DATA TEKNIS Kontrol: Fanuc 16i-T Tinggi senter: 175 mm Jarak antara senter: 1000 mm Sumbu Linear Panjang penggerindaan: 500 mm Rentang gerak: X: 267 mm, Z: 650 mm Kepala Spindel Gerinda Sudut putar tak terbatas: +/- 8,5° Dimensi batu gerinda luar: 500x80x203 mm Daya: 7,5 kW Kecepatan: 44 m/detik Kepala Spindel Benda Kerja Lsdpfxjlbgfcs Aptsrn Tipe tirus: MK5 Sumbu C: +/- 5° Daya: 1 kW Putaran: 30-1000 min-1 Dudukan Ekor Tipe tirus: MK3 Jarak gerak pinole: 35 mm Diameter pinole: Ø 50 mm Berat maksimum benda kerja: 130 kg Catu Daya Tegangan: 400V 50 Hz Data teknis diberikan tanpa kewajiban, kesalahan atau perubahan mungkin terjadi.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 13.321 h, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 640 mm, jarak gerak sumbu Z: 640 mm, produsen pengendali: MAZATROL, model controller: SmoothG, kecepatan spindel (maks.): 18.000 rpm, daya motor spindle: 35.000 W, jumlah slot dalam magazin alat: 60, jumlah sumbu: 4, This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle coolant at 32 bar, and a Renishaw OMP 60 probe system. Offering spindle speeds up to 18,000 rpm and a tool magazine capacity of 60, it is ideal for precise and efficient machining. Take advantage of the opportunity to acquire this Mazak HCN 4000 horizontal machining center. Contact us for further information about this machine. • Table: Pallet size 400 x 400 mm; number of pallets: 2; 1° incremental indexing • Control: Mazatrol SmoothG • Coolant/Air: Through-spindle coolant 32 bar; through-spindle air supply; Niagara flushing • Functions: Rigid tapping (tap without compensating chuck); G00 rotary function • Compliance: CE marking Additional Equipment • Renishaw OMP 60 measuring probe • Renishaw Inspection+ (version 2022) • Tool length measurement system • Tool ID system • Chip conveyor Ledpjx Enllefx Aptjrn • Additional filter cartridges Technical Specification Taper size SK 40

Kondisi: bekas, Tahun pembuatan: 2007, 0 Lsdpfx Apow Rf S Sjtorn

Kondisi: bekas, en-GB:Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Spindle speed: 35-10,000 rpm Spindle power: 37 / 30 kW Spindle torque: 525 / 206 Nm Tool holder: BT 50 Rapid traverse: 60 m/min Tool changer: 160 positions Pallet size: 500 x 500 mm Control: MAZATROL 640M Nexus C-axis: 0.001° x 360,000 Workpiece weight: 1,000 kg Max. workpiece height: 1,000 mm Interference circle: 900 mm 2 horizontal machining centres (HCN 6000-II + HCN 6000, year 2005), linked via a 16-station MAZAK FMS pallet system 2-station pallet changer Chip conveyor Ledpfx Apowix Hhetjrn Coolant system with through-spindle coolant (IKZ)

Kondisi: bekas, Machine has a fault in the main spindle. CNC Vertical Machining Centre CHIRON Type FZ 22 L high speed Machining centre with CNC control FANUC Series 21-M Serial No. 179-98 Year of manufacture: 1999 Travel distances X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load capacity 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free adjacent stations 105 mm Tool change time tool-to-tool 2.0 sec. Tool change time chip-to-chip 4.8 sec. Distance spindle nose – table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Power supply 400 Volt, 50 Hz, 32 kVA - Pendulum machining via 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - 40-position tool changer - Through spindle coolant (IKZ) - Splash guard cabin with sliding door - Indirect path measurement system - Coolant unit with chip conveyor adjacent - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Machine weight approx. 7.5 tons Transport dimensions for the truck L x W x H 12000 x 2470 x 2950 mm Transport weight on the truck approx. 10 tons Lrjdpfx Apsquhbgeten Weight 7.2 tons Good condition – machine has a fault in the main spindle.

Kondisi: bekas, tc_800_hcn_6000_2008 Lrsdpfx Apewix E Rjten

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 25.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12630000523, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 1.050 mm, produsen pengendali: Heidenhain, model controller: Heidenhain TNC460, berat keseluruhan: 14.100 kg, Perlengkapan: konveyor serpihan, used-dmg-mori-dmc-80-h-description-en Ledpey R Ra Njfx Aptern

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), X/Y/Z travel: 3200mm/1400mm/500mm; table dimensions X/Y: 3000mm/1250mm; max. workpiece width: 1500mm. Spindle speed: 10,000 rpm; spindle taper: CAT50; spindle power: 35 HP; tool magazine capacity: 30 stations. Dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm; weight: approx. 24,000 kg. On-site inspection is possible. Lrodetx Dpfjpfx Apton

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Rentang gerak: Sumbu X: 560 mm Sumbu Y: 640 mm Sumbu Z: 640 mm Meja: Ukuran palet: 400 x 400 mm Jumlah palet: 2 Pengindeksan: langkah 1° Spindel: Lredjyhczfepfx Aptsn Taper spindle: SK-40 Kecepatan maks: 18.000 rpm Daya: 35 kW Majalah alat: Kapasitas: 60 alat Perlengkapan: Kontrol: Mazatrol SmoothG Pengukuran panjang alat Pendinginan melalui spindle dengan tekanan 32 bar Pembilasan Niagara Aliran udara melalui spindle Probe pengukur Renishaw OMP 60 Renishaw Inspection + (Versi 2022) Sistem ID alat Konveyor serbuk Katrid filter tambahan Pemotongan ulir tanpa chuck kompensasi Fungsi kemiringan G00 Tanda CE Mesin dapat diperiksa dalam kondisi terhubung listrik.

Kondisi: baik (bekas), Tahun pembuatan: 2019, jam operasional: 19.000 h, Fungsionalitas: berfungsi sepenuhnya, 2019 HELLER H6000 CNC Double-Pallet Horizontal Machining Center CNC Horizontal Machining Center with Double Pallet System Low operating hours, single-shift machine, excellent condition Lrsdey S S Hyspfx Apton Manufacturer: HELLER Model: H6000 Year of manufacture: 2019 Machine type: CNC Horizontal Machining Center Pallet system: Double pallet / 2-pallet system Serial number: MXXXXX (upon request) Pallet size: 630 x 630 mm Maximum pallet load: 1,000 kg Maximum workpiece height: 1,200 mm Travel paths: X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 1,000 mm B-axis: 360° / 0.001° indexing Rapid traverse speeds: X-axis: 50,000 mm/min Y-axis: 50,000 mm/min Z-axis: 75,000 mm/min B-axis: 25 rpm Feed forces: X-axis / Y-axis: 15,000 N at 40% duty cycle Z-axis: 20,000 N at 40% duty cycle Spindle speed range: 5 – 6,000 rpm Spindle drive power: 60 kW at S6 / 40% duty cycle Max. spindle torque: 2,292 Nm at S6 / 40% duty cycle Spindle interface: HSK 100A Automatic tool changer: 50 positions Maximum tool diameter: 280 mm Maximum tool length: 600 mm Maximum tool weight: 25 kg Condition: The machine is in excellent condition, has low operating hours, and can be inspected immediately. The machine is available at short notice.