Pemilih pesanan tingkat rendah

Jungheinrich EJE 220 // Elektro // neue UVV

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, jam operasional: 7.792 h, kapasitas angkut: 4.000 kg, tinggi angkat: 5.650 mm, pusat beban: 500 mm, jenis bahan bakar: gas, Tersertifikasi DGUV hingga: 11/2025, panjang garpu: 1.600 mm, kondisi ban: 95 persen, berat kosong: 7.183 kg, warna: kuning, We are offering an absolutely top-condition Jungheinrich forklift. In 2021, it was completely refurbished to a 5-star standard by Jungheinrich and has only clocked 45 operating hours since the overhaul. The paint is original – it has not been resprayed or touched up! The forklift has always been stored indoors and is in excellent condition. Maintenance and safety inspection (UVV) are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 45) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift truck Year of manufacture: 2012 / 5-star refurbishment in 03/2021, complete with new Kaup fork positioner T466 Rated capacity: 4,000 kg Lift height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load centre: 500 mm Mast: Triple, including free lift Equipment: Solo-Pilot, road lighting package (StVZO), LED work lights (2 front, 2 rear), front/rear/cabin/roof windows Steel doors, leather seat, rear-view mirror, armrest, 2-way additional hydraulics New Kaup fork positioner 4.8T 466B The truck has only been run for 45 hours since its overhaul, and all safety inspections and maintenance have been carried out. Gjdpfxsw N Iz He Adtett

Kondisi: bekas, panjang kontainer: 40 kaki, warna: lain,

Kondisi: baru, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 units S&S electrohydraulic frame press type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment available: central pressure beam, device for angled windows, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner connections optional), CE-certified version The only fully automatic, high-performance frame press, self-adapting and does not require pre-positioning of timber. Width and height adjustments are carried out automatically, without downtime, immediately after direct placement of Gtsdpfx Aed Rzc Rodtst workpieces into the pressing area. No repositioning of the timber is necessary. Base machine features heavy-duty, welded frame construction, made from oversized, thick-walled special profiles. Guide rails for pressing corners are precision-machined for minimum wear on the pressure beams. Continuous abutment for width pressing on the stop side, unbendable design, mounted on the base frame. Continuous abutment below, highly torsion-resistant design, connected to the base frame and machine interface. Infeed height: 500 mm. All abutments are precision adjustable for absolute angular accuracy and long-term precision. Right sliding carriage with fast, motorized width adjustment, ensuring parallel travel, including automatic hydraulic locking: Central drive for horizontal and vertical size adjustment, with high input and adjustment speed and automatic width and height adjustment (optoelectronic control). 2 vertical double-acting pressing cylinders, piston diameter 50 mm, 250 mm stroke, pressure force adjustable from 400 to 2,000 kg. 2 horizontal double-acting pressing cylinders, piston diameter 40 mm, 80 mm stroke, pressure force adjustable from 250 to 1,250 kg. Upper right pressing corners are heavy-duty, milled type, with automatic corner adjustment. Free-floating press corners Contact surfaces feature glue-repellent finish. Abutment and pressure plate depth: 100 mm. 8-way holding and positioning system for fully loose placement of all single timber parts in the pressing area (no prior stacking or plugging required). Each frame component is held and positioned at two points. Automatic lift-up function enables ergonomic placement of the upper cross member even with tall frames, at an operator-friendly height. Improved work safety through ground-level operation—no ladders or steps required. All individual frame timbers are placed directly into the pressing area. Program selection options: manual motorized via pushbutton, fully automatic via optoelectronic size adjustment, including automatic pressing cycle in tandem with a safety light barrier. Automatic, cycle-controlled pressing by impulse signal: vertical pressing – release – horizontal pressing – release – vertical/ horizontal pressing. Control cabinet conveniently mounted to the left on the base frame. Fast, optoelectronic size adjustment. Compact hydraulic system adjustable from 20 to 100 bar. Freely programmable, electric hand controller for efficient operation, particularly suitable for large and complex frame designs (

Kondisi: baik (bekas), Tahun pembuatan: 2019, Weinig Conturex Greenline Plus CNC Fensterfertigungsmaschine Beschreibung: Baujahr: 2019 Bearbeitungslänge Werkstück: 4.500 mm Godpfx Adsw N Nixotjtt Automatische Teilekontrolle am Einlauf Spannbackenverstellung in Verbindung mit Falzspannern Hauptantrieb 30 kW indirekt angetrieben Unispindel zum Zapfen, Bohren und für Sonderbearbeitungen Werkzeugwechsler mit 35 und 17 Plätzen Werkzeugaufnahme HSK 63F Spezielle Software zur Maschinen- und Betriebsdatenerfassung Pufferstrecke Ein-/Auslauf: 2.000/2.500 mm Optionales Werkzeugsatz/Plan verfügbar Komplette Beschreibung auf Anfrage (Trotz größter Sorgfalt sind alle Änderungen, Irrtümer in technischen Daten, Preisen und Angaben vorbehalten. Keine Garantie für abgedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf.) Preise zzgl. Inseratskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden.

Kondisi: bekas, Working width 4000 mm Working height 2600 mm Number of pressing cylinders 6 pcs. Dimensions (length/width/height) 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, ----- CE version Robust frame-welded construction made of thick-walled special hollow profiles, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical pressing cylinders on special pressure beams with single-handed quick adjustment with weight balance, height-adjustable in 50 mm hole grid, long sliding carriages ensure the permanent absorption of high pressing forces. Fast and smooth width adjustment via ball-bearing mounted carriage with central locking, fixation in 50 mm hole grid. Upper horizontal pressing cylinder infinitely height adjustable and fitted with weight compensation. Lower horizontal pressing cylinder with centering bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, equipped with 2 vertical pressing cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-handed quick adjustment, 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm (double acting), with weight compensation; 2 manual control valves, pressure gauge, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg pressing pressure vertical, with 3 kW three-phase motor for 400 Volt, 50 Hz mains voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Space requirement: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article ,00 pcs Gtodpfx Aou Uvaljdtst Central pressure beam with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article ,00 pcs Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Cross pressure device complete with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve Weight compensation on lower horizontal cylinder omitted Article ,00 pcs Individual pressure regulation for cross pressure device, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Shut-off valve for 3rd vertical cylinder Article ,00 pcs Shut-off valve for upper horizontal cylinder Article ,00 pcs Width compensation pad for pressing small frames to bridge the 1st pressure beam, including shut-off valve on 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles The required height increases by 100 mm Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device consisting of: locking device for vertical pressure beams and 3 attachable, side-guided swing pressure plates Article ,00 pcs Double swing pressure plate for pointed (triangle) windows ----- Total price as specified above ex works: On request! -----

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 700 mm, ketinggian potong (maks.): 250 mm, tinggi kerja: 850 mm, daya: 7,5 kW (10,20 hp), We are offering 1 x JRIMAC Underslung Crosscut Saw UKS 1.000 for sale. Crosscut capacities: 60x940mm, 140x820mm, 180x720mm, 220x520mm, 240x340mm Maximum cutting height: 260mm Saw blade diameter: 700mm Working height: 850mm Extraction ports (above and below): 160mm - Infinitely variable, pneumatic feed rate - Hydraulic brake cylinder for consistent stroke speed - Pneumatically controlled workpiece clamping device Gjdpfx Adsrfudrotett - 2-hand control with protective shield for cutting activation - Roller conveyors and stop systems available on request

Kondisi: sangat baik (bekas), Four-sided planer SCM Compact XL - Planing width: 23 cm - Planing height: 13 cm - Electric adjustment of top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle 4 kW, right and left each with 7.5 kW motor, top 5.5 kW, universal spindle 5.5 kW Gtjdpfx Adelat Hdotot Machine in very good condition

Kondisi: baru, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing cycle with workpiece clamping-sawing-frame raise to preset height after completed cut. Infinitely variable hydraulic cutting pressure and feed rate monitoring at the saw band. This ensures optimum settings for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles. Especially suitable for universal use with different cross-sections, materials, and frequent miter cuts. The machine control complies with CE standard 89/289. Gsdpjt D Azcefx Adtstt Technical Data: Cutting capacity in mm round/flat 90°: 325/500 x 300 45°: 300/300 x 300 30°: 200/200 x 200 45°: 300/300 x 300 Rapid lowering of the saw frame to the material edge via push button Manual miter adjustment from 45°–90°–30°, continuously adjustable via scale The miter pivot point is the intersection between the saw band and the fixed clamping jaw, which ensures no change in length measurement when changing angles Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At any frame angle, material is clamped parallel at 90° Complete coolant system with electric submersible pump Centralized machine operation Saw band drive with limit switch Movable band guide arm, adjustable to material width Saw band deflection rolls with carbide guides Integrated chip removal brush Saw band tensioning with torque wrench Paint finish: silver grey/blue grey (RAL 7001/ RAL 7031) Minimum remnant piece length: 60mm Cutting speed: AC frequency-controlled drive 15–150 m/min, steplessly adjustable on operator panel Drives: Saw band: 3.0kW; 400V, 50Hz Hydraulics: 1.1kW Coolant pump: 0.1kW Saw frame feed: Stepless up to 300mm/min, hydraulically controlled Saw band tensioning: Mechanical, with torque wrench Saw band dimensions: 4200x34x1.1mm Working height: 750mm (without mounting elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm

Tahun pembuatan: 2006, Kondisi: baik (bekas), FIN SC2R/1300 glue application machine with 2 rollers Model: SC2R-1300 Year of manufacture: 2006 Godpfx Adefguntstott Manufacturer: FIN s.r.l. Italy Key technical specifications: Working width: 1300 mm Maximum clearance between rollers: 120 mm Roller diameter: 185 mm Feed speed: 19 m/min Net weight: 390 kg Overall dimensions: 64 x 210 x 136 cm Total dimensions with crate: 73 x 200 x 153 cm 400 V, 50 Hz, 0.37 kW Precise and uniform application with all types of adhesives, excellent technical features, high practical suitability, functionality, and operator safety, place this machine at the top of the 2-roller glue application machines. The applicator roller is covered with acid-resistant rubber, ground and grooved, and highly durable. Thanks to a rational rubber coating, it allows for 6–7 regrinding cycles. The roller is easy and quick to dismantle. The machine applies glue precisely and evenly to one or both sides of the panels. Special shock absorbers on the roller supports enable automatic roller opening to accommodate panels of differing thickness within a 5 mm range and compensate for any panel parallelism deviations. Uniform glue dosing is ensured by a rectified steel distribution tank, designed for rapid removal to facilitate cleaning. Collection trays for glue and wash water are made of galvanized sheet metal and are extendable for easy maintenance and cleaning. Protective covers made of sheet metal on the rollers and glue distribution tank provide safety: a metal guard prevents the insertion of objects thicker than 5 mm above the set clearance, ensuring maximum operator safety. Electrical installation is housed in a waterproof enclosure with fuses and thermal protection for the motor and transformer. Control panel features include start button, stop button, and warning light (24 V). Roller rotation is driven by a self-adjusting chain tensioner. The roller washing system uses a perforated pipe for water supply during the cleaning process.

Tahun pembuatan: 2023, Kondisi: baru, TNDG manual positioner with handwheel and pneumatic clamping. Position display via linear encoder and digital readout. Available in lengths of 3, 4, 6, and 8 meters. Working height: 800–1050 mm Gsdpopa Nzyjfx Adtett Permissible load: 70 kg per meter Roller dimensions: 40 x 300 mm PACKAGING AND DIMENSIONS: TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) TNDG-6: 6500 x 670 x 430 mm (130 kg)