Forklift

Kalmar DCD370-12

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, Diameter benda kerja maks.: 400 mm Panjang benda kerja maks.: 300 mm Diameter chuck maks.: 500 mm Diameter lintasan maks.: 520 mm Sumbu X, langkah gerak: 1.110 mm Sumbu Z, langkah gerak: 595 mm Spindel utama: Daya 40 / 100% ED 47/34 kW Pgsdpfxjxy Ac Se Aqvst Spindel utama: Torsi 40 / 100% ED 600 Nm Spindel utama: Kecepatan putar maks.: 2.850 rpm Fanuc 31i Tanpa sumbu Y

Kondisi: baru, Tahun pembuatan: 2026, kapasitas angkut: 3.500 kg, tinggi angkat: 5.000 mm, pengangkatan bebas: 5.000 mm, pusat beban: 500 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.550 mm, produsen motor: Yunnei EUR5 2,7L, panjang garpu: 2.000 mm, berat keseluruhan: 4.400 kg, berat kosong: 4.400 kg, tinggi total: 2.550 mm, lebar total: 1.800 mm, warna: biru, Perlengkapan: Penandaan CE, garpu palet, geser samping, kabin, kopling trailer, pelindung depan, pencahayaan, pendingin udara, penggerak semua roda, perpanjangan fork, Saya menawarkan forklift off-road dengan kapasitas angkat 3,5 ton dan penggerak 4x4 permanen. Mesin diesel EUR5 Yunnei DEF20CAF4 55kW 75HP. Kabinnya dilengkapi AC. Forklift ini dilengkapi dengan: - tiang triplex, ketinggian angkat 5m - side shift fork - fork positioner - lebar carriage ekstra besar 1500mm! - garpu panjang 1220mm - tambahan garpu kedua panjang 2000mm sudah termasuk harga - ban pneumatik ukuran 20,5/70/16 Dimensi forklift: panjang 370cm, lebar 180cm, tinggi 255cm Berat forklift: 4400kg Pgjdpoxa Anhefx Aqvst Pilihan tambahan: bucket hidrolik lebar 1800mm Harga forklift: 19.800 EUR Sebagai importir langsung, saya menjamin ketersediaan suku cadang. Tersedia leasing atau cicilan. Silakan hubungi!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 29.000 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning center equipped with a FANUC 31i control system, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium 3-turret configuration, with turrets 1 and 2 each offering X, Z, and Y axes, while turret 3 is dedicated to counter spindle operations. All three disc turrets are fitted with 10 stations each and provide highly flexible complete machining via driven tools at up to 6,000 rpm. With a gantry loader, conveyor belt, C-axes on both main and counter spindles, and powerful spindle drives, this machine is ideally suited for the productive series production of complex turned/milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disc turrets Bar capacity: 65 mm Machine bed: vertically arranged gray cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis travel: 700 mm Z-axis rapid traverse: 50 m/min Tool carriers / Turrets Configuration with 3 disc turrets, each with 10 stations. Tooling system at 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis travel: 110 mm Psdpfoy Tmhzjx Aqvogt Z-axis travel: 320 / 550 mm as per documentation Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 550 mm Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Exclusively for operations on the counter spindle X-axis travel: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Additional technical features as per documentation: - Gantry loader with numerically controlled Z-axis - Workpiece removal from main or counter spindle to conveyor belt - Remnant workpiece removal from the main spindle into remnant bin Gantry loader: Travel speed: 100 m/min Travel range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Flow rate: 19 l/min Chiller capacity: 13 kW Coolant system: Pump capacity: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, panjang pembubutan: 700 mm, jarak pergerakan sumbu X: 205 mm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 22.000 W, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 3.900 mm, berat keseluruhan: 9.800 kg, Complete machining with twin spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg payload Chip conveyor Pgedpfx Aqjyn Em Rovet Paper band filter system with pressure tank Max. turning diameter: 400 mm X-axis: 205 mm Z-axis: 700 mm Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle power: 22 kW Counter spindle speed: 6000 rpm Counter spindle through-hole: 62 mm Counter spindle power: 15 kW Tool changer: 16 positions Speed of driven tools: 6000 rpm Positions lower turret: 16 Driven tool speed: 6000 rpm Driven tool power: 7 kW Chip conveyor: yes Tool Eye: yes Length: 6000 mm Width: 3900 mm Height: 2800 mm Weight: 9800 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, neither representation nor contract terms are implied. We recommend verifying all important details.

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06007153/001, tinggi total: 6.050 mm, lebar total: 3.380 mm, panjang total: 3.074 mm, kapasitas muatan per bagian penyimpanan: 210 kg, tinggi konstruksi: 6.050 mm, tegangan masuk: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of Manufacture: 2006 Total Load Capacity: 2 x 33,550 kg Load per Tray: Medium: 205 kg (evenly distributed) Tray Dimensions: 3050 x 864 mm Number of Trays: 36 units (more or heavier trays available on request) Shuttle Dimensions (W x D x H): 3,380 x 3,074 x 6,050 mm (Kardex height is adjustable to available installation height) Power Supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid while the system is unsold. Technical Specifications per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays Medium: 210 kg each, evenly distributed; additional or heavier trays available upon request. Pgjdpfxjxq Tbte Aqvjt - Tray size: 3050 x 864 mm - Machine dimensions (W x D x H): 3,380 x 3,074 x 6,050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m²; each tray approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - Access opening with sliding doors for the protection of personnel and stored goods - Control unit: C2000, with B/W OP2000 display - LED anti-glare lighting above access opening - Toothed belt drive for minimal noise - Toothed belt drive for fastest order picking - Shelf support profile configuration allows 25 mm adjustment steps—a prerequisite for high-density storage - Weight monitoring controls for each tray - Includes light pointer/position indicator Price: On request, only via email Price: excl. VAT, incl. transport and installation Delivery: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from brands including Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus series. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Kalmar LMV 9-600 forklift Load capacity: 9 t Podpfxjvq Im Ue Aqvsgt Diesel

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Pgoder A Hcbepfx Aqvot Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 018.0179.90.035, Please let us know your offer price. Sales only within Europe, including Turkey. Price without packaging; Delivery condition: FCA (machine location) Pgodpfxoyh R Uwe Aqvjt ===== For technical data, please refer to the attached handout. All warranty and guarantee rights are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, completeness of accessories and tooling, or compliance with all safety and environmental protection requirements stipulated by accident prevention regulations. No sale to private individuals.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.500 mm, gerak cepat sumbu X: 35.000 m/menit, pergeseran cepat sumbu Y: 40.000 m/menit, pergerakan cepat sumbu Z: 40.000 m/menit, lebar total: 5.800 mm, tinggi total: 4.500 mm, panjang total: 13.500 mm, panjang meja: 10.000 mm, lebar meja: 1.250 mm, High-Performance Column-Type Milling Machine – Precision and Machining Power Linear RAM guidance combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 tool positions, L = 400 and Ø 250, max. 35 kg Coolant filtration with 15 bar high-pressure internal coolant supply (IKZ) Chip conveyor BLUM 3D probing system Pjdpfeyr Dmdox Aqvsgt Wide bed, linear guidance in X-axis, traverse path W = 930 mm Rotary table drive pre-installed in control cabinet X-axis travel: 8,000 mm Y-axis travel: 1,300 mm Z-axis travel: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: ISO 40/BT/MK X-axis feed rate: 35,000 mm/min Y-axis feed rate: 40,000 mm/min Z-axis feed rate: 40,000 mm/min Auto-indexing milling head: 0.001 x 0.001 degree Operating hours: 3,800 H Machine dimensions: Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual liability is assumed. We recommend verifying all important details.

Kondisi: bekas, Tahun pembuatan: 1990, drehparam-001 Psdpfoygx D Hsx Aqvsgt