Forklift diesel

Kalmar DCG120-6

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 17.619 h, kapasitas angkut: 12.000 kg, tinggi angkat: 3.220 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, tinggi konstruksi: 3.250 mm, lebar kerangka garpu: 2.750 mm, panjang garpu: 2.200 mm, berat kosong: 16.500 kg, panjang total: 4.600 mm, jenis penggerak: Diesel, lebar konstruksi: 2.750 mm, Diesel forklift Load center: 600 mm Fork width: 200 mm Fork thickness: 65 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 12.00-20 Rear tires type: Superelastic Rear tires size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders available in our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing at favorable terms are always possible. We are also happy to purchase your used equipment directly, even if you are not buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DCG120-6. P.S.: Our master workshop specializes in repairs, maintenance, overhauls, and custom builds for forklifts from 8 tons upwards. We are also happy to sell your vehicle on consignment in our showroom. Sideshifter, Fork positioner, Bsdpfxeu Uwcbe Apceli Fork positioner opening range: 575 / 2620 mm Heater, Full cabin,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 7.950 h, Fungsionalitas: berfungsi sepenuhnya, Vertikales Drehzentrum / Vertikaldrehmaschine Hersteller: EMAG Modell: VL6 (FANUC) Baujahr: 2021 Betriebsstunden: ca. 7.950 Gesamtgewicht: 10,5 t Hauptspindel 28,5 kW Leistung bei 40/100 % ED: 41/28,5 kW Drehmoment bei 40/100 % ED: 491/340 Nm Volle Leistung bei Spindeldrehzahl: 800 min⁻¹ Max. Drehzahl: 3.100 min⁻¹ Schlitten X, Z Antriebseinheit für angetriebene Werkzeuge (HP Revolverantrieb, C362) mit interner Kühlmittelzufuhr zum Werkzeug Max. Drehzahl: 9.600 min⁻¹ Volle Leistung bei 3.000 min⁻¹ Drehmoment bei 100 % ED: 33 Nm/10,4 kW Drehmoment bei 40 % ED: 44 Nm/13,8 kW Drehmoment bei 10 % ED: 56 Nm/17,6 kW Werkzeugaufnahmeeinheit für angetriebene Werkzeuge: 12 x BMT65 Komponentenlager- und Fördersystem, O-Typ (GO 240") Trägerprismensystem für 10 Werkstücke Werkstückhöhe: max. 250 mm Werkstückgewicht: max. 40 kg Satz (10 St.) Trägerprismen für Werkstückdurchmesser: 150 – 300 mm Abblasvorrichtung für Werkstück und Spannmittel (Pick-up) Kühlschmierstoffversorgung: 15 bar Kühlschmierstoffpumpenleistung: ca. 80 l/min bei 15 bar Kühlaggregat (6,5 kW, Wasser-Luft) Doppelfilter für Kühlschmierstoff, manuell umschaltbar Filterfeinheit 100 µm, mit elektrischen und mechanischen Verschmutzungsanzeigen Späneförderer, Kettentyp – Heckauswurf Scharnierbandausführung: Heckauswurf Späneauswurfshöhe: 1.100 mm (mit integriertem Kühlschmierstofftank, Kapazität ca. 500 l) Emulsionsnebelabsaugung: Absaugleistung ca. 800 m³/h Spüldüse Werkstückvermessung mit Messtaster Tasterabblasung Blodpfx Aowzwu Iopcji Werkzeugüberwachung (Sister-Tool-Management) 3-Farben-Signalleuchte Schnellbackenfutter SMW Autoblok KCNS-N400-128 max. = 3.500 min⁻¹ Satz harte Grundbacken Satz weiche Aufsatzbacken Softwarepaket Betriebsanleitung / Wartungsanleitung

Kondisi: baik (bekas), nomor mesin/kendaraan: 2646, Tahun pembuatan: 2013, kapasitas angkut: 12.000 kg, tinggi angkat: 4.000 mm, tipe tiang: dupleks, lebar kerangka garpu: 200 mm, panjang garpu: 2.400 mm, panjang total: 4.650 mm, lebar total: 2.500 mm, berat operasi: 16.840 kg, fitur perlengkapan tambahan: Dual tread, Weight system, Warning triangle, Centralized greasing system, Perlengkapan: pencahayaan, kalmar-dcg120-6-uniktruck-wheels Bsdpfx Aeyuhqlepcjli

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2015, jam operasional: 16.276 h, kapasitas angkut: 12.000 kg, tinggi angkat: 2.950 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, tinggi konstruksi: 3.200 mm, lebar kerangka garpu: 2.450 mm, panjang garpu: 2.100 mm, berat kosong: 19.940 kg, panjang total: 4.650 mm, jenis penggerak: Diesel, lebar konstruksi: 2.600 mm, Diesel forklift Blsdsy R E Nrjpfx Apcsi Load center: 600 mm Fork width: 200 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tire size: 12.00-20 Rear tires type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive conditions are always possible. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice on this DCG120-6. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons onwards. We are also pleased to display your vehicle for consignment sale. Sideshift, fork positioner, Heater, full cabin, air conditioning,

Kondisi: baik (bekas), Tahun pembuatan: 2006, Mesin bubut bekas dari OKUMA - Model: LT 200-M TwinStar Bedev S Su Sepfx Apcoli - Tahun produksi: 2006

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 570 mm, tinggi benda kerja (maks.): 520 mm, berat benda kerja (maks.): 300 kg, jumlah slot dalam magazin alat: 34, tinggi total: 2.935 mm, panjang total: 3.600 mm, lebar total: 3.700 mm, lebar meja: 860 mm, model controller: FANUC, pasokan pendingin: 12 batang, jarak dari tengah meja ke hidung spindel: 780 mm, daya motor spindle: 15 W, pergerakan cepat sumbu Z: 40 m/menit, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, hidung spindel: ISO 40, kecepatan spindel (maks.): 10.000 rpm, kecepatan spindel (min.): 80 rpm, tinggi meja: 560 mm, beban meja: 300 kg, diameter alat: 80 mm, panjang alat: 300 mm, berat alat: 8 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Vertical machining center with automatic pallet changer "DOOSAN model VC500" equipped with Fanuc 21i-MB CNC Bodpfxju T Hg Te Apcoli

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Bedpfx Aer A Hcbopceli Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: bekas, Tahun pembuatan: 2008, fa512b7e Bledsyv Ipfopfx Apcji

Kondisi: baik (bekas), Tahun pembuatan: 2013, Jarak antar pusat 4000mm, diameter ayun 950mm, diameter ayun di atas cross slide 630mm, diameter spindle 254mm, FANUC 32i-Model B, 30Hp, kecepatan spindle 630rpm, turret otomatis 8 posisi, konveyor serbuk, tailstock, chuck 4 rahang & chuck belakang 4 rahang, pelindung interlock, pendingin, steady rest tetap. Bledpfxjxp Hhdj Apcsi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 2.200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: G3158-0645, de Blsdpfxsw Dcdye Apcsi