Pengeboran dan penggilingan M/C

KAMI FKM 650A

Kondisi: baik (bekas), Translation into English: x-travel: 400 mm y-travel: 375 mm z-travel: 250 mm Table size: 205 x 800 mm T-slots: 4 x 45 14 H7 Spindle speeds: 50 - 3150 rpm Tool holder: 40 ISO Quill stroke: 50.0 mm Feeds X + Z axis: 5.0 - 1000 mm/min Feed Y axis: 5.0 - 670 mm/min Rapid traverse: 2.4 / 1.6 m/min Control: Heidenhain Total power requirement: 5.1 kW Weight: 950 kg Dimensions (LxWxH): 1860 x 1790 x 1750 mm From a training workshop (vocational school) Well-maintained condition (!!) Equipment/Features: Iedjxl E Syepfx Ankstn - MAHO universal milling/drilling machine - HEIDENHAIN positioning/contouring control "TNC 135" * 3-axis manual input control * Programmable by machine operator * Practical and simple operation - Electro-mechanical feeds on all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse 1.6 m/min - Swiveling milling head, adjustable to both sides - Tiltable universal T-slot table - Vertical clamping area - Infinitely variable speed adjustment - Manually extendable quill - Hardened and ground guideways - Electro-hydraulic tool clamping - Coolant system - Front coolant drip tray - Operating manual

Tahun pembuatan: 2020, Kondisi: baru, Oxygen and temperature measurement in molten metals Isdpfx Ansgqr A Djketn

Kondisi: baik (bekas), Manufacturer: STANKO Model: 7D430 Year of Manufacture: 1994 Table rotation: 360° Head tilting capability up to 10° Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Specifications Metric | Imperial Ijdpswpud Ajfx Ankotn Table diameter: Ø 630 mm Table load capacity: 1,000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Throat depth: 500 mm Stroke range: 3 - 38 m/min Power: 12 kW Approximate Dimensions Length: 3,000 mm Width: 2,200 mm Height: 3,000 mm Weight: 6,150 kg Please Note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute any representation or contractual terms. We recommend verifying all critical details.

Tahun pembuatan: 2023, Kondisi: baru, IMMEDIATELY AVAILABLE! Vibratory Finishing Machines with Separator The machines of the VKUE series can be used for surface processing of metallic and non-metallic workpieces. These machines feature a large screening surface and allow for easy separation of workpieces from abrasive media. Optional Accessories - Pneumatic sound enclosure - Pneumatic flap control - Frequency converter Ijdsn Smclspfx Ankstn - Dosing pump - Solenoid valve - Stand for control panel - Rinsing tube (various types) The images are for reference only. Optional accessories are available at an additional cost.

Kondisi: bekas, Tahun pembuatan: 1968, Roll diameter 500 mm Throat depth 1050 / 485 mm Workpiece height 300 mm Saw blade length 3920 - 4050 mm Cutting speed 15 - 940 m/min Table height 1040 mm Table surface 750 x 800 mm Table tilt 15 degrees Total power requirement 4.0 kW Machine weight approx. 1750 kg Space requirements approx. 2100 x 1000 x 2100 mm - Unique mitre range left/right up to 30° acute angle Itodpfx Aneiqp Erokjn - Mitre setting via lockable indexing every 15° - Adjustable saw blade for optimal entry angle - Hydraulic vice on both sides - Electronic blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating linear guides - Additional table 450 x 450 mm - Machine lamp

Kondisi: baru, WMD25LV - 230V / 1Ph Drilling capacity in steel ----- 25 mm Milling capacity in steel ----- 20 mm Face milling capacity ----- 63 mm Motor ----- Brushless 750W Spindle speed infinitely variable 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle taper ----- MT3 Worktable ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Throat ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill chuck incl. holder * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right rotation switch * Milling head rotatable left / right 90 degrees Iodpfega T Eijx Ankjtn * Toolbox with various tools OPTION * Base cabinet € 249.00 excl. VAT

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, - Dimensi internal yang dapat digunakan: D=900 mm T=580 mm (ukuran lain atas permintaan) - Tekanan semprotan: 3,2 bar - Kapasitas beban keranjang: 200 kg - Volume tangki: 130 L - Perlengkapan standar: • Skimmer oli - Perangkat pemompa • Rangka, tutup, dan bodi terbuat dari baja tahan karat • Sistem hisap uap listrik dengan pengatur waktu • Keranjang dari baja tahan karat • Filter stainless steel di sisi isap pompa • Elemen pemanas dari baja tahan karat • Putaran keranjang mekanis dengan motor penggerak • Sistem kelistrikan IP 65, kontrol dengan PLC (DGT V4) • Pengisian air otomatis • Mikro switch pengaman memantau pembukaan tutup Iedpfef A D Itjx Ankstn • Nozzle semprot dari baja tahan karat • Timer mingguan untuk pemanas dan pemisah oli • Penghitung jam operasi

Kondisi: baru, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1.2 t Dimensions (LxWxH): Length 2400 mm, Width/Depth 2160 mm, Height 2300 mm, Weight 1200 kg Spindle speed: 60–4200 rpm - Solid construction made from high-quality Meehanite cast iron - High concentricity accuracy thanks to tapered roller bearings; measured runout in the quill less than 0.01 mm - Infinitely variable speed control - Forward/reverse for thread cutting - X and Z axes with adjustable 55° dovetail guides - Y-axis with flat guideways - Drilling/milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step 0.04–0.15 mm/rev - Motorized feed in X, Y, and Z axes - Precision micro-feed - Milling spindle with precision bearing - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant channel - Central lubrication - Height-adjustable safety screen with microswitch for maximum operator protection against flying chips and parts - Large, heavy-duty cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity 300 kg - Large travel distances: X / Y / Z axis: 740 mm / 330 mm / 320 mm Dimensions and Weights Length: 2400 mm Width/Depth: 2160 mm Height: 2300 mm Weight: 1200 kg Drilling/Milling Capacity Max. face mill size: 76 mm Max. shank-type end mill: 25 mm Iodpfxjd H Hhze Anketn Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical Connection Total connected load: 3 kW Supply voltage: 400 V Phases: 3 Ph Power type: AC Mains frequency: 50 Hz Milling Table (Horizontal) Length: 254 mm Width: 1370 mm Vertical spindle to milling table max.: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal Spindle Overhang: 0–420 mm Coolant System Coolant pump drive power: 90 W Motors Vertical spindle power (standard operation): 2.2 kW Standards and Approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical Spindle Overhang: 0–420 mm Spindle taper: ISO 40 DIN 2080 Speed range: 60–4200 rpm Number of speed ranges: 2 Speed control: mechanical, stepless Swivel range, milling head X–Y plane: 90° Swivel range, milling head Z–X plane: 45° Quill diameter: 86 mm Quill travel: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head vertical travel (Z-axis): 470 mm PU: 1

Kondisi: baik (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: 860027, 24331 Technical Specifications: - Table surface: 1700 x 550 mm - Manual travel distances X / Y: 1300 x 500 mm - Drill press manufacturer: MAXION, Model: BT 18 STP - Drilling capacity up to: 18 mm - Tapping capacity up to: M 16 - Drill spindle mount: MK 2 (Morse taper 2) - Drill spindle stroke with fine depth adjustment: 76 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - Spindle speeds: 100 - 1800 rpm Isdeu Aq Amopfx Ankotn 200 - 3600 rpm - Motorized stroke for the drilling unit - Motorized table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Power connection: 400 V - Required space (approx.): W 1750 x H 1600 x D 1000 mm - Weight (approx.): 1200 kg

Kondisi: sangat baik (bekas), Bandwidth: 6 - 200 mm Strip thickness: 6 – 0.5 mm Speed: max. 100 m/min Working direction: optional Work roll diameter: 250 mm Roll length: 250 mm Roll core for roll ring assembly: 190 mm Itjdpfx Anep E Ed Reken