Mesin bor radial

Kao Ming KMR-1250DH

Kondisi: hampir baru (bekas), Ketinggian senter pada meja 330 mm, diameter maksimum yang dapat dibubut di peluncur 408 mm, diameter maksimum yang dapat dibubut di meja 640 mm, diameter maksimum yang dapat dibubut di rongga 899 mm, jarak antara senter 2000 mm, kecepatan spindle variabel, rpm 18/1500, diameter lubang spindle 105 mm, dudukan spindle ASA 11”, kepala lepas MK5, diameter laras 90 mm, langkah 250 mm. langkah melintang peluncur 275 mm. motor utama 15 hp. berat mesin 3450 kg. Iodpfxsx Dikko Akpjth

Kondisi: bekas, Tahun pembuatan: 1990, Grinding length: 1500 mm Grinding width: 550 mm Workpiece height: 400/450 mm Table size: 1900 x 450 mm Table speed: 1 - 25 m/min Automatic cross feed: 0 - 60 mm/stroke Grinding wheel dimensions: 400 x 100 x 127 mm Grinding spindle speed: 1400/2800 rpm Itjdpfx Akowlvirspsh Total power requirement: 15 kW Voltage: 380 V Machine weight: approx. 5 t The machine was overhauled in 2015 and converted to a modern control system. The machine is equipped with a coolant system, automatic vertical infeed, dressing device, and wheel mounts.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, tahun perombakan terakhir: 2004, it-hu-01 Itedpfx Akeg Ryqkopjh

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Ijdocc D Ddopfx Akpjth Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Kondisi: hampir baru (bekas), Tahun pembuatan: 1998, Fungsionalitas: tidak berfungsi, tinggi pembubutan: 1.900 mm, berat benda kerja (maks.): 15.000 kg, diameter pembubutan: 2.630 mm, diameter pelat muka: 2.500 mm, tinggi total: 5.000 mm, lebar total: 4.800 mm, panjang total: 4.800 mm, diameter meja putar: 2.500 mm, beban meja: 15.000 kg, diameter meja: 2.500 mm, tahun perombakan terakhir: 2025, masa garansi: 12 bulan, berat keseluruhan: 38.850 kg, kecepatan meja: 2.500 mm/menit, SC2700 Vertical Turning Lathe 2700 dengan 2 Kepala Kerja - Retrofit Selesai Spesifikasi: Status retrofit: baru saja di-upgrade (sistem mekanik, listrik, hidrolik), dalam proses penyambungan daya. Panel listrik: peralatan listrik baru, kabel, kabel port, penutup. Motor utama: asli 55 kW, sudah direvisi. Itodpfx Ajygldgokpjh Kondisi: secara mekanis seperti baru, jam kerja rendah. Inspeksi: tersedia kapan saja. Atas permintaan, dapat dinaikkan untuk menampung benda kerja yang lebih tinggi, atau mendapatkan upgrade CNC. Harga, instalasi, dan transportasi atas permintaan. Spesifikasi teknis lebih lanjut tersedia atas permintaan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, diameter putar di atas sled silang: 570 mm, panjang pembubutan: 2.000 mm, lubang spindel: 62 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 3 rpm, berat benda kerja (maks.): 2.000 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The VDF 560 DUS are the most popular teach-in lathes from VDF Boehringer in terms of turning diameter. With a standard chuck size of 315 mm or more, these machines offer optimal machining efficiency for single-part and small-batch production. This machine is currently on display in our showroom; an on-site inspection is possible! Included in the scope of delivery: drawer cabinet with various tools and Multifix holders. Specifications Manufacturer: VDF Boehringer Model: DUS 560 TI Year: 2005 Condition: Used Stock number: 00164 Maximum turning diameter: 570 mm Iodpfxswv S Rte Akpoth Maximum turning length: 3000 mm Spindle bore: 62 mm Speed (min-max): 3 - 2500 rpm Spindle power: 19 kW Spindle mount: DIN 55 027 Gr. 8 Tool turret: Multifix Number of turret positions: 2 Tailstock quill taper: MK5 CNC control brand/type: Heidenhain Manual Plus 4110

Kondisi: baik (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 12.000 mm, jarak lintasan sumbu Y: 3.500 mm, Technical Specification - X-Axis (Longitudinal Travel, Table): 12,000 mm - Programmable Feed Rate: 0.5 – 6,000 mm/min - Rapid Traverse: 20,000 mm/min - Motor Speed: 3,000 rpm - Y-Axis (Vertical Travel, Column): 3,500 mm - Programmable Feed Rate: 0.5 – 6,000 mm/min - Rapid Traverse: 20,000 mm/min - Motor Speed: 3,000 rpm - Rated Motor Torque: 42 Nm Z - W Axis (Spindle Head): - Boring Spindle Diameter: 150 mm - Axial Stroke, Boring Spindle (Z): 1,200 mm - Rapid Traverse, Z Axis: 20,000 mm/min - Boring Spindle Taper: DIN 69871, ISO 50 - Spindle Head Diameter: 254 mm - Bearing Inner Diameter, Spindle Front: 200 mm - RAM Dimensions: 400 x 400 mm - Axial Stroke RAM (W): 1,000 mm - Rapid Traverse, W Axis: 15,000 mm/min - Total Axial Stroke (Z+W): 2,200 mm Itodjyuxd Njpfx Akpeh - Rated Torque, Spindle Motor W and Z Axis: 42 Nm - Number of Gear Spindle Stages: 2 - Spindle Speed Range: 6 – 3,500 rpm - Spindle Motor Power: 60 kW Clamping Plate Fields: - Dimensions: 2 units at 1,500 x 4,500 mm, 1 unit at 2,000 x 4,500 mm - Load Capacity: 15,000 kg/m² Workpiece Table (Axis V1-B1 / V2-B2): - Table Dimensions: 2,000 x 3,000 mm - T-Slot Size: 28 mm - T-Slot Pitch: 180 mm - Table Top Height from Floor: 650 mm - Load Capacity: 40 t Tool Rack Magazine ATC 13-150 R 147: - Max. Magazine Capacity: 147 tools - Max. Tool Weight: 35 kg - Max. Tool Length: 700 mm - Tool Taper: DIN 69871 - Tool Change Time: 28 sec Milling Head with Indexed Vertical Axes, Model TTL 2 18 360 - Tool Holder: ISO 50, DIN 69871 EQUIPMENT: - CNC Control: Heidenhain iTNC 530 - Electronic Handwheel - Chip Conveyor (Year of Manufacture: 2023) - CE Marking - Documentation

Kondisi: sangat baik (bekas), Tahun pembuatan: 1972, Fungsionalitas: berfungsi sepenuhnya, Kami menjual mesin bubut ini. Mesin terhubung listrik, dapat diuji coba. Aksesori tersedia bersama mesin. Diameter pembubutan: 2.000 mm. Panjang pembubutan: 10.000 mm. Berat benda kerja (maks.): 60.000 kg. Diameter pemesinan: 2.000 mm. Video mesin dapat dikirim melalui WhatsApp. Iodpoxwmbmjfx Akpsth

Kondisi: baru, Tahun pembuatan: 2025, tinggi pembubutan: 2.000 mm, berat benda kerja (maks.): 12.000 kg, diameter pelat muka: 2.000 mm, CNC vertical turning center Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Max. swing diameter: Ø3,000 mm Max. turning height: 2,000 mm Table speed: max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-axis (ram vertical travel): 1,200 mm Drive spindle speed: max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Cross rail (vertical travel): 1,000 mm, 250 x 4 steps (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Iodpfx Akoxqb D Njpeth Cutting feed rate: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.) Control: Fanuc 31i-B Display unit: 15-inch TFT LCD Tape memory: 1 MB Automatic tool changer: 12 stations (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holder: New 240 TCR-01 (2 units) Splash guard: table version (R-type standard) External coolant system: 3 bar (80 l/min) Chip conveyor: hinged belt type 4-jaw independent manual chuck Foundation anchor bolts / leveling plates Maintenance tools and toolbox Hydraulic unit Work area lighting Signal light: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical manuals Power supply: 220 V, 60 Hz, 3 phase Machine color: manufacturer standard OPTIONAL ACCESSORIES (#1) Automatic tool changer ATC 24 positions – on request Automatic shutdown for N.C – on request Turning tool holder type 240 TCR – on request Through-spindle coolant supply: 30 bar (pump pressure) – on request Transformer 415 V, 50 Hz, 3 phase – on request Linear scales X, Z axes – on request Rigid tapping – on request Automatic tool changer ATC 24 positions – on request Other: INSTALLATION, COMMISSIONING, TRIAL RUN, AND TRAINING – not included in the price INSURANCE AND TRANSPORT – not included in the price Subject to change and errors in technical data. The accessory scope is defined exclusively and within the scope of the textual article description. No claims can be made for any additionally pictured accessories, e.g. for illustrative purposes. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Kondisi: bekas, Tahun pembuatan: 1996, Technical Details: Grinding diameter: 1.5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0 - 1 mm Feed rate: stepless/continuous mm/min Grinding wheel speed: 1300 rpm Control unit: Num 1020 GC Total power requirement: 14 kW Machine weight approx.: 3.8 t Machine dimensions: 3.0x2.2x2.2 m Control cabinet dimensions (LxWxH): 1.5x0.4x2.0 m Iodpfx Asu Ngyzekpjth CENTERLESS EXTERNAL CYLINDRICAL GRINDING MACHINE for alloyed round steels, plunge-cut and through-feed grinding processes - In plunge-cut mode the maximum plunge length is 160 mm. - Workpiece discharge is automatic via rail (the function and operation of which is not known to WMW AG) - Main grinding wheel with dressing device, speed = 1300 rpm. - Regulating wheel with dressing device, entry angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system Condition: Reference run not possible The machine does not operate in automatic mode Accessories: Various grinding and regulating wheels available on request