Mesin pengasah alat - pengasah mata milling

Kapp AST305B

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Kapp AST‑305B – Technische Daten Maschinentyp: Automatische Schärfmaschine für Wälzfräser und Verzahnungsfräser Baujahr: ca. 1979 Maschinenfunktion: Nachschärfen von Wälzfräsern sowie schräg- oder gerade genuteten Fräsern; Nass- oder Trockenschliff möglich Maximaler Werkzeugdurchmesser: 300 mm (12 Zoll) Maximale Werkzeuglänge zwischen den Spitzen: 700 mm (27 Zoll) Maximaler Tischweg: 550 mm (21,56 Zoll) Maximaler Schleifscheibendurchmesser: 300 mm (12 Zoll) Maximale Spitzenhöhe: 155 mm (6,1 Zoll) Tischvorschub (stufenlos einstellbar): – Tiefenschleifen: 30 bis 1.000 mm/min – Planschleifen: 3 bis 16 mm/min Drallwinkelbereich: 0° bis 45° Drallbereich: wählbar bis 24 Zoll auf Null bzw. 12 Zoll auf Null Schleifspindeldrehzahl: 2.200 U/min (optional 1.000–4.000 U/min) Axialverstellung der Schleifspindel: 420 mm (16,54 Zoll) Rjdpfx Aowwkt Aja Ijw Vertikale Verstellung des Schleifkopfes: 300 mm (11,81 Zoll) Spindelaufnahme: Morse 4 oder Steilkegel 40 Vorwählbarer Einzustich einzeln: Bereich 0 bis 9.999 (Einheiten) Maschinenabmessungen: Länge 3.000 mm × Tiefe 2.080 mm × Höhe 2.360 mm (ca. 118 × 82 × 93 Zoll) Maschinengewicht: ca. 3.000 kg (7.500 lbs) Steuerung: Ursprünglich manuell/analog, häufig nachgerüstet mit Allen‑Bradley-PLC

Kondisi: hampir baru (bekas), Tahun pembuatan: 1998, Fungsionalitas: tidak berfungsi, tinggi pembubutan: 1.900 mm, berat benda kerja (maks.): 15.000 kg, diameter pembubutan: 2.630 mm, diameter pelat muka: 2.500 mm, tinggi total: 5.000 mm, lebar total: 4.800 mm, panjang total: 4.800 mm, diameter meja putar: 2.500 mm, beban meja: 15.000 kg, diameter meja: 2.500 mm, tahun perombakan terakhir: 2025, masa garansi: 12 bulan, berat keseluruhan: 38.850 kg, kecepatan meja: 2.500 mm/menit, SC2700 Vertical Turning Lathe 2700 dengan 2 Kepala Kerja - Retrofit Selesai Spesifikasi: Status retrofit: baru saja di-upgrade (sistem mekanik, listrik, hidrolik), dalam proses penyambungan daya. Panel listrik: peralatan listrik baru, kabel, kabel port, penutup. Motor utama: asli 55 kW, sudah direvisi. Kondisi: secara mekanis seperti baru, jam kerja rendah. Inspeksi: tersedia kapan saja. Atas permintaan, dapat dinaikkan untuk menampung benda kerja yang lebih tinggi, atau mendapatkan upgrade CNC. Harga, instalasi, dan transportasi atas permintaan. Rsdpfxoygldge Aa Iew Spesifikasi teknis lebih lanjut tersedia atas permintaan.

Kondisi: baru, Tahun pembuatan: 2025, tinggi pembubutan: 2.000 mm, berat benda kerja (maks.): 12.000 kg, diameter pelat muka: 2.000 mm, CNC vertical turning center Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Max. swing diameter: Ø3,000 mm Max. turning height: 2,000 mm Table speed: max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-axis (ram vertical travel): 1,200 mm Drive spindle speed: max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Cross rail (vertical travel): 1,000 mm, 250 x 4 steps (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting feed rate: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.) Control: Fanuc 31i-B Display unit: 15-inch TFT LCD Tape memory: 1 MB Automatic tool changer: 12 stations (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holder: New 240 TCR-01 (2 units) Splash guard: table version (R-type standard) External coolant system: 3 bar (80 l/min) Chip conveyor: hinged belt type 4-jaw independent manual chuck Foundation anchor bolts / leveling plates Maintenance tools and toolbox Hydraulic unit Work area lighting Signal light: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical manuals Power supply: 220 V, 60 Hz, 3 phase Machine color: manufacturer standard OPTIONAL ACCESSORIES (#1) Automatic tool changer ATC 24 positions – on request Automatic shutdown for N.C – on request Turning tool holder type 240 TCR – on request Rjdpfx Aexqb D Nsa Isw Through-spindle coolant supply: 30 bar (pump pressure) – on request Transformer 415 V, 50 Hz, 3 phase – on request Linear scales X, Z axes – on request Rigid tapping – on request Automatic tool changer ATC 24 positions – on request Other: INSTALLATION, COMMISSIONING, TRIAL RUN, AND TRAINING – not included in the price INSURANCE AND TRANSPORT – not included in the price Subject to change and errors in technical data. The accessory scope is defined exclusively and within the scope of the textual article description. No claims can be made for any additionally pictured accessories, e.g. for illustrative purposes. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Tahun pembuatan: 1971, Kondisi: bekas, en-GB:Technical Details: Maximum wheel diameter: 300 mm Module range: max. 5 / min. 0.5 Redpfovc Apbox Aa Isw Maximum workpiece weight: 60 kg Approx. machine weight: 4.0 t Machine dimensions (LxWxH): 1800 x 1850 x 2500 mm Control cabinet dimensions: No. 1: 1930 x 400 x 1920 mm No. 2: 800 x 230 x 1950 mm Exhaust system dimensions: 1400 x 700 x 560 mm Cooling unit dimensions (LxWxH): 1.2 x 1.0 x 0.45 m Electronically controlled gear flank grinding machine Suitable for modules up to 5 and diameters from 240 – 300 mm Stepless feed rate per workpiece revolution: 0.4 – 3.2 mm Max./min. number of teeth: 130 / 12 Max./min. pressure angle: 30° / 14°30′ Max./min. helix angle at 24 teeth: 6000 / 200 mm Max. helix angle, both sides: 45° Grinding worm speed: 1,900 rpm Supplied without dressing attachment Equipment: Approx. 77 various change gears, extension pipes, and various accessories Two of these machines are available for sale. Both machines are supplied via two shared control cabinets and an exhaust system.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 25.000 h, jarak pergerakan sumbu X: 10.300 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.800 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, posisi kepala milling: 2.5 x 2.5 °, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 60 rpm, lebar meja: 3.300 mm, panjang meja: 12.000 mm, diameter pemasangan: 50 mm, tinggi total: 48.750 mm, lebar total: 100.000 mm, panjang total: 212.000 mm, berat keseluruhan: 100.000 kg, Duplex-Fräsen bestehen aus zwei Maschinen, die sich gegenüberstehen und entweder separat oder als Einzelmaschine betrieben werden können. Das Werkstück kann mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen wie einzelnen Fräsmaschinen Erhöhung der Fertigungsgenauigkeit durch Komplettbearbeitung des Werkstücks in einer Aufspannung (in den meisten Fällen) Eine einzige Bedienperson kann die Duplex-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition dank hoher Produktivität Die Duplex-Lösung ermöglicht verschiedene Konfigurationen: Einzelner Arbeitsbereich, Pendelbearbeitung Geeignet für die Bearbeitung von Baggerarmen und Auslegern, z.B. für CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo Rsdpfxorx Rxto Aa Ijw X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Antriebsleistung der Spindel: 22/30 kW Spindeldrehzahlen: 60–3.000 U/min Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf-Autopositionierung: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Kondisi: bekas, Kúp jarak minimum/maksimum: 0–108 mm Sudut kemiringan minimum/maksimum: 5°/84° Kontrol: GE Fanuc Series 0-GC Rjdpjyh Rmmofx Aa Iew Diameter lingkaran pitch (rasio 1:1): 152 mm Diameter lingkaran pitch (rasio 10:1): 216 mm Jarak diameter (paling halus/paling kasar): 1.3/8.5 Mod. Permukaan kepala roda gigi maks.: 35 mm Spindel pisau – rentang kecepatan rotasi: 41–121 rpm Rentang kecepatan spindel kerja: 0–33,33 rpm Berat: 9025 kg Ruang yang dibutuhkan kira-kira: 2707 x 2720 x 2200 mm Perlengkapan/aksesori: - 18 set pisau - Konveyor serbuk - Dokumentasi teknis

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Grinding wheel width max. 15 mm Grinding wheel diameter max. 110 mm Module - max. 0.5 - 10 Pressure angle 15 - 25° Speed 2800 rpm Total power requirement 0.4 kW Machine weight approx. 0.02 t Space requirement approx. 0.4 x 0.2 x 0.2 m For profiling grinding worms for gear flank grinding machines. Finish and re-profiling on the following models: NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM,... Rodpovibc Hofx Aa Iew Adjustable plate (right) with micrometer screw axial adjustment Adjustable plate (left) with micrometer screw radial adjustment 2 precision motor spindles for mounting diamond wheels.

Tahun pembuatan: 1988, Kondisi: bekas, nomor mesin/kendaraan: 103.071.3156.78192, Saw blade diameter: 400 and 425 mm Redpoz N Amsfx Aa Ijw Cutting capacity at 90° round: 130 mm Cutting capacity at 90° square: 120 x 120 mm Mitre cutting capacity at 45° round: 130 mm Mitre cutting capacity at 45° square: 110 x 110 mm Cutting speeds: 11 and 22 m/min Feed rates: 670 mm/min Cut length: with automatic feed up to 1200 mm Electrical connection: 380 V, approx. 4 kVA Saw drive: 1.6/2.5 kW Space requirement: 1800 x 3800 x 2000 mm Weight: approx. 1800 kg

Kondisi: bekas, Tahun pembuatan: 1965, Maximum core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Maximum drilling diameter: 110 mm Total power requirement: 30 kW Machine weight: approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling diameter: - Solid drilling approx. 2 - 50 mm - Boring approx. 100 mm Maximum drilling depth: 1,600 / optionally up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage: approx. 4,000 mm Distance between the two spindle heads: 5,000 mm Centre height above guideway: 350/450 mm Drilling feed of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Work spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V - 50 Hz Total machine/guideway length: 7,500 / 5,000 mm Total weight: approx. 10,000 kg Accessories / Special configuration: - The machine consists of the following elements: The main spindle on the left, followed by a BOZA, a table unit powered by a ball screw, BOZA with increased centre height, and at the end, a spindle head of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm; very large and complex coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø - Suitable for rotating workpieces/fixed drilling tools (ELB and BTA methods), as well as for stationary workpieces and rotating drilling tools. It can operate with internal oil supply (ELB) or external oil supply (BTA). - Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate: 17/40/120 or 220/500 litres/min, tank capacity approx. 2,500 litres - Feed of the main carriage via ball screw and infinitely variable DC motor. The main carriage currently holds a cross-adjustable table (approx. 500 mm adjustment, table size approx. 800 x 800 mm) for accommodating cubic and cylindrical workpieces. Electrically controlled via a cam track (approx. 2,500 mm) and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck, approx. 315 mm Ø - Modernised control panel with speed display, feed adjustment and display, kW display, feed/rapid traverse switching (left/right), etc. - 2 separate switch cabinets, separate BoZa, sleeves, reducers, clamping aids, and much more. Rsdpfx Aaot Hwuco Ijw Condition: Good – demonstration ready shortly. Due to the accessories, the machine is very valuable. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further deep hole drilling machines always in stock – please enquire.

Tahun pembuatan: 2007, Kondisi: bekas, verzahnung-001 Redpew Rf S Eefx Aa Iew