Mesin broaching internal vertikal

Karl Klink RSI 8 DT1

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: complete overhaul by manufacturer in 1994 Weight: 3,700 kg Pulling force: 10,000 kg (100 kN) Dedpfogyd T Esx Afwewc Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: infinitely adjustable from 1 m/min to 6 m/min Return speed: steplessly adjustable up to 20 m/min Electrical connection: 400V / 50Hz

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Dwjdpfxjr A Hcbj Afwsc Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Tahun pembuatan: 1995, Kondisi: bekas, nomor mesin/kendaraan: 18891, Towing capacity: 10 tons. Djdpfxsbrcmke Afwewc Lift: 1000 mm 3 broaching stations With chip conveyor + platform for above-floor installation and safety door

Kondisi: baik (bekas), Tahun pembuatan: 2003, panjang pembubutan: 1.505 mm, Turning and Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control system: Sinumerik Power line Technical Specifications: Dwsdewzbq Tspfx Afwec Main spindle ISM 90 drive power: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Magazine capacity: 120 slots Milling spindle tool holder: HSK 63 Counter spindle ISM 90 drive power: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed for driven tools: Number of turret stations: 12 Tool holder: VDI 40 Equipment: - Chip conveyor - High-pressure system with 20 bar - Preparation for 3D touch probe - Tailstock function for counter spindle - Automatic sliding doors

Kondisi: baik (bekas), Manufacturer: STANKO Model: 7D430 Year of Manufacture: 1994 Table rotation: 360° Head tilting capability up to 10° Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Dwjdpfewpud Aex Afwsc Specifications Metric | Imperial Table diameter: Ø 630 mm Table load capacity: 1,000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Throat depth: 500 mm Stroke range: 3 - 38 m/min Power: 12 kW Approximate Dimensions Length: 3,000 mm Width: 2,200 mm Height: 3,000 mm Weight: 6,150 kg Please Note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute any representation or contractual terms. We recommend verifying all critical details.

Kondisi: baik (bekas), Tahun pembuatan: 1984, Max. wheel diameter: 250 mm Wheel width: 275 mm Module (max.): 6 Machine weight: approx. 5.5 t The gear hobbing machine ZFWZ 250 is suitable for the efficient production of all indexable cylindrical gears such as: - Straight and helical spur gears, worm wheels and worms, splined shafts, keyed shafts, broached profiles, chain and ratchet wheels, as well as conical and crowned straight and helical gears. Change gears and milling accessories Dedpfx Afev T Nqajwswc Technical data: - Max. workpiece diameter: 250 mm - Max. module: 6 mm - Max. axial feed travel: 275 mm - Max. tangential feed travel: 100 mm - Max. helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. cutter length: 170 mm - Min. clamping surface (table): 195 mm - Max. clamping surface (table): 470 mm Performance Cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (Special version with DC motor): 140 ... 400 rpm Weight - Net machine weight: approx. 5,000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip conveyor: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3,950 mm DC drive: 3,450 mm (or 3,350 mm as per table) - Width: 3,300 mm - Height: Machine: 1,980 mm Machine with DC drive: 2,150 mm Electrical cabinet: 2,200 mm

Kondisi: bekas, Räummaschine Dsdot Hr Dfopfx Afwewc

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), An old Schumag Aachen drawing machine without a control unit is available. Drawing force: 100 kN, drawing speed: 80 m/min, material diameter range: 25 mm to 43 mm. An on-site inspection is possible. Dwedpfx Afjv Tctuowsc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, tinggi total: 1.100 mm, lebar total: 300 mm, panjang total: 300 mm, berat keseluruhan: 60 kg, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, FARO measuring arm 7-sumbu, kepala laser, berbagai probe ukur, alas berat untuk pemasangan, dalam koper asli; termasuk perangkat lunak CAM2 dengan dongle, Laser Line Probe V3, dan berbagai dokumen pendukung. Dwjdpfxjyq R R Hs Afwjc

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Mesin gerinda Haas Multigrind HT yang telah direkondisi sepenuhnya akan tersedia pada kuartal 1 tahun 2027. Digunakan untuk mempertajam kembali mata frais heliks / mata frais roda gigi cacing / rotor pemotong / mata frais alur / pisau industri / pisau melingkar / roda dorong / perkakas pelubang / bor lubang dalam, serta benda kerja / komponen lainnya. Dodpjx Tr H Nofx Afwjwc Sistem kendali: Siemens 840 D Sumbu X: 650 mm Sumbu Y: 400 mm Sumbu Z: 280 mm Sumbu A (perangkat pembantu): 360° SK50 Sumbu C (meja putar): 270° Sumbu X3: elektrik dengan penyangga Spindel gerinda: HSK80 (dapat dimodifikasi menjadi HSK50) Unit pemoles Pengubah perkakas: piring magasin 10 posisi Sistem pendingin: Separator Turbo Sistem penyedot debu: LTA Sistem pemadam CO2 Aksesori tambahan lainnya tersedia dari pabrik Perangkat lunak dapat disesuaikan dengan kebutuhan pelanggan Pemeriksaan awal di pabrik dan uji coba, pelatihan, serta pemeriksaan akhir di lokasi pelanggan Pembiayaan / sewa-beli memungkinkan Permintaan perubahan dapat dipenuhi