Mesin penggiling silinder - universal

KELLENBERGER 1000U BEMA Economic

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Gjdpfsv I Eq Ssx Ahueir Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: bekas, Landonio TMU 1200 tornio Gedpfx Aoizxvkshusir

Kondisi: baik (bekas), Tahun pembuatan: 1993, tragfähigkeit-1500-kg Gjdpfxsx Hqhfj Ahuoir

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding Wheel Head Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. Newly painted. Workpiece Headstock Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of belts. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, and overhauled. Hydraulics Disassembly, motor inspection, replacement of hoses, defective and worn parts replaced. Hydraulic block inspected. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., hydraulic piston overhaul, tables ground. Z-Axis Disassembly, tables ground, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical Cabinet Comprehensive inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry in accordance with manufacturer’s protocol. Inspection and cleaning of various accessories Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal centres distance: 600 mm Maximum centres distance (with extended headstock): 750 mm Centre height, standard: 125 mm Centre height with interchangeable headstock/follow rest shoes: 175 – 250 mm Maximum workpiece diameter (at 125 mm centre height): 250 mm Maximum workpiece diameter with interchangeable shoes: 350 – 500 mm Table swivel range, each direction: 10° Maximum surface grinding length (max. width = 200 mm): 900 mm Table speed, stepless hydraulic adjustment: 0 – 6 m/min approx. Table reversal delay: 0 – 5 sec Grinding wheel for external grinding, diameter-width-bore: 400 x 50 x 127 mm Grinding wheel for surface grinding: 250 x 13 x 76 mm Grinding spindle speed: 1500/1700/2200/3600 rpm Grinding wheel head swivel range: 270° With index positions every: 90° Vertical movement of grinding wheel head, centre height: 125–350 mm Transversal travel of grinding wheel head: 285 mm Hydraulic rapid feed and retract travel: 40 mm Intermittent infeed of grinding wheel by table reversal: 0.001–0.03 mm/dia Giodpew U Ry Nofx Ahuor Continuous plunge grinding infeed: 0–0.9 mm/dia Micrometer stop for infeed, per increment: 0.001 mm/dia Workhead swivel range: 360° Workhead spindle speed, stepless variable, normal/special speed: 20–400 / 10–400 rpm Workhead / tailstock internal taper: Morse 5 / 3 Grinding wheel head motor, approx.: 4 HP All technical details provided without responsibility for errors or omissions.

Tahun pembuatan: 2012, Kondisi: baik (bekas), de-Muratec MW120 GT zu verkaufen Gebraucht, in ausgezeichnetem Zustand. Die Maschine kann nach Terminvereinbarung besichtigt werden. Gsdpfx Ahoifi D Touoir Der Transport liegt in der Verantwortung des Kunden, wir können jedoch bei Bedarf beim Verpacken und Verladen behilflich sein. Lieferung: EXW Székesfehérvár

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: Maximum wheel diameter: 200 mm Wheel width: 60 mm Maximum module: 7 Machine weight approx.: 15 t Table diameter: 180 mm Table speed range: 100 rpm Cutter speeds: 750 rpm Giodpfxsxc E H Se Ahujr Well-maintained gear hobbing machine without feeder/automation Available from: 24.08.2024

Kondisi: baik (bekas), schleifmaschine-001 Gijdpfx Aexcblqohusr

Kondisi: bekas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel path X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed rate (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel path: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5,000 [kg] - Distance from table center to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2,500 [mm] - Max. workpiece height: 1,850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] OPERATING HOURS - Operating hours: 15,446 [h] ACCESSORIES - Control: Fanuc 31i-model B5 - Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * Internal coolant supply (IKZ) * with paper filter * with coolant chiller * with rinsing gun * with cabin wash - Chip conveyor - Spindle cooling - Tool probe system - Workpiece probe system: Renishaw RMP60 - Tool breakage monitoring: SOFT AC - Number of pallets: 2 Gjdew Ephbspfx Ahuoir - Vice - Tool holders

Kondisi: bekas, Tahun pembuatan: 1983, Inner diameter min/max: 10 / 250 mm Grinding depth: 400 mm Max. external diameter: 380 mm Swing diameter: 390 mm Max. table travel: 550 mm Min. table stroke: 2 mm Rapid traverse: 10 m/min Gjdpfx Aevprxfohujir Infinitely variable table speed: 0 - 10 m/min Coarse adjustment: 18 mm Fine adjustment: 4 mm Max. workpiece weight: 100 kg Spindle head: B 6 DIN 55021 Spindle speeds - stepless: 15 - 1,500 rpm Max. swivel angle: +/- 30 degrees Spindle bore: 50 mm Drive power: 2 kW Rapid traverse: 0 - 250 mm/min Stroke: 70 mm Drive power: 3 kW Machine weight approx.: 2.7 t Space requirement approx.: 3.0 x 3.0 x 3.2 m Internal grinding machine BAHMÜLLER - JES 12 - New control system (July 2015)

Kondisi: bekas, Tahun pembuatan: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over sub-slide: 138 mm Swing diameter over sub-slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm, 8-step, stepless Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Gjdpfxjvbhv Rj Ahueir Application: Primarily used for back-turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitches). Back-turning and relief grinding can be performed from the front, rear, and along the machine axis. Main drive through an 8-speed manual gearbox. Feed gearbox is a 12-speed manual gearbox. Swivel range of sub-slide = 360° Swivel range of cross-slide = 360° Chuck is a cone plate Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm ARBAH-L 3+1 measuring system FRENIC 5000G11 inverter 3-jaw chuck Ø 250 mm in good condition.