Mesin gerinda silinder

Kellenberger 600 U

Kondisi: bekas, lebar total: 1.500 mm, panjang total: 2.300 mm, tinggi total: 1.700 mm, de-to-hu-it-lt-2024-06-17-01 Fpodpsx Ryu Aofx Adgob

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Mesin CNC pengasah alat Walter Helitronic Power FH, dengan pemuat palet silinder, penukar cakram 8-posisi, pemisah kabut elektrostatis, sistem pemadam kebakaran, pompa suplai oli, perangkat lunak Walter Window-Mode dan Toolstudio, paket perangkat lunak: 001,002,003,016,017,026,090,091,098,099,032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard, dengan persiapan sistem hidrolik (lunette). Spindle penggiling (satu spindle) digerakkan langsung dan dilengkapi pendingin oli. Motor poros berlubang pada sumbu A dengan kecepatan putar 0-750 rpm. Sumbu C, X, Z, dan A telah direkondisi pada tahun 2022. Fpedjx E Dfbspfx Adgeb

Kondisi: bekas, 3 buah flange untuk tipe 600 U – dijual satuan atau paket Fpjdpfx Aex N Rytjdgeb

Kondisi: sangat baik (bekas), Description to follow! Fsdpjx Hartefx Adgopb

Kondisi: baik (bekas), Tahun pembuatan: 2008, 1 used surface grinding machine Manufacturer: Elb Model: Smart NG STC Serial No.: 511210608 Fodpfxsv T Rhao Adgjpb Control: Siemens, Simatic Multipanel Touch Magnetic chuck: 400 x 600 mm Hydraulic table drive, table speed: 2 - 30 m/min Table load on magnetic plate: 400 kg Grinding area (L x W x H): 600 x 400 x 475 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle drive: 4.3 kW Grinding spindle taper: 36 mm Vertical travel (Z-axis): max. 475 mm Cross travel (Y-axis): max. 370 mm Machine weight: 3,800 kg Machine dimensions (L x W x H): 2,750 x 2,050 x 2,150 mm Electronic handwheel for Y/Z-axes Dressing unit with compensation and dressing diamond, height-adjustable by 22 mm Wet grinding system with coolant pump (50 l), automatic paper band filter (60 l) Travel measurement in Y/Z-axes via rotary encoder

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding Wheel Head Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. Newly painted. Workpiece Headstock Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of belts. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, and overhauled. Hydraulics Disassembly, motor inspection, replacement of hoses, defective and worn parts replaced. Hydraulic block inspected. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., hydraulic piston overhaul, tables ground. Z-Axis Disassembly, tables ground, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical Cabinet Comprehensive inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry in accordance with manufacturer’s protocol. Fjdpfew U Ry Nox Adgspb Inspection and cleaning of various accessories Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal centres distance: 600 mm Maximum centres distance (with extended headstock): 750 mm Centre height, standard: 125 mm Centre height with interchangeable headstock/follow rest shoes: 175 – 250 mm Maximum workpiece diameter (at 125 mm centre height): 250 mm Maximum workpiece diameter with interchangeable shoes: 350 – 500 mm Table swivel range, each direction: 10° Maximum surface grinding length (max. width = 200 mm): 900 mm Table speed, stepless hydraulic adjustment: 0 – 6 m/min approx. Table reversal delay: 0 – 5 sec Grinding wheel for external grinding, diameter-width-bore: 400 x 50 x 127 mm Grinding wheel for surface grinding: 250 x 13 x 76 mm Grinding spindle speed: 1500/1700/2200/3600 rpm Grinding wheel head swivel range: 270° With index positions every: 90° Vertical movement of grinding wheel head, centre height: 125–350 mm Transversal travel of grinding wheel head: 285 mm Hydraulic rapid feed and retract travel: 40 mm Intermittent infeed of grinding wheel by table reversal: 0.001–0.03 mm/dia Continuous plunge grinding infeed: 0–0.9 mm/dia Micrometer stop for infeed, per increment: 0.001 mm/dia Workhead swivel range: 360° Workhead spindle speed, stepless variable, normal/special speed: 20–400 / 10–400 rpm Workhead / tailstock internal taper: Morse 5 / 3 Grinding wheel head motor, approx.: 4 HP All technical details provided without responsibility for errors or omissions.

Kondisi: bekas, techdata-2024-06-14 Fjdpeuhbywsfx Adgjpb

Kondisi: bekas, Tahun pembuatan: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx. 385 mm Clamping surface of table: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Fodjt Tqrnjpfx Adgjpb Grinding wheel dimensions: ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical traverse: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross traverse: 1000 mm/min Total power requirement: 6 kVA Machine dimensions L x W x H: 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, wheel dressing device, wet grinding system with paper band filter.

Kondisi: diremaj di bengkel (bekas), KELLENBERGER 600 U 175 ist eine Rundschleifmaschine hoher Präzision, exakt und zuverlässig. Kapazität: Spitzenhöhe 175 mm, Spitzenweite 600 mm; Schleifscheibe Ø350×50 mm, Bohrung 127 mm; Schleifkopf 270°. Technische Daten: Scheibendrehzahl 1500–3600 t/min (4 Stufen); Werkstückspindel 20–400 t/min (stufenlos); Tischneigung 10°, bis 6 m/min; Anschluss 3×380 V 50 Hz; Schleifspindelmotor 4 CV; Gewicht ≈2200 kg; Maße 3000×1750×1600 mm. Zubehör: Digitalanzeige 2 Achsen, Reitstock mit Feinverstellung, Innen-Schleifeinrichtung, Schleifscheibenschutz, Schutzvorrichtung, Schiebetür. Eignet sich für enge Toleranzen in Automotive, Uhren, Werkzeugbau, Luftfahrt und Medizintechnik. Fpodpfx Aoxx U H Tjdgob

Kondisi: bekas, Tahun pembuatan: 1986, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Very well-maintained machine. The machine comes from a precision grinding workshop in the Black Forest. Machine can still be inspected under power at the seller’s premises for a short period. In 2022, the machine underwent partial overhaul and maintenance at our facility, including restoration of geometry according to the manufacturer’s protocol. Equipment: Fsdpev Tqqnjfx Adgepb - 2-axis FAGOR digital readout - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Surface grinding attachment - Internal grinding unit - Fischer UJ70 internal grinding spindle - Paper band filter - Automatic cycle: Rough grinding – Finish grinding – Spark-out – Return

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MGB1320E, tinggi pusat: 180 mm, berat benda kerja (maks.): 100 kg, panjang penggilingan: 500 mm, diameter roda gerinda: 400 mm, lebar total: 14.150 mm, panjang total: 18.000 mm, tinggi total: 14.750 mm, diameter penggilingan: 320 mm, panjang benda kerja di antara senter: 350 mm, lebar roda gerinda: 50 mm, kecepatan spindel (maks.): 3.000 rpm, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Z: 150 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan sumbu Z: 1 m/menit, berat keseluruhan: 2.100 kg, kecepatan maksimum spindel benda kerja: 400 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Beijing No.2 Machine Tool (BEIER) Fsdpfxetr Azkj Adgspb Semi-automatic High-speed External Cylindrical Grinding Machine MBS1320E Online production equipment; machine testing available; roundness within 0.001 mm Manufacturer: BEIER MACHINE TOOL WORKS CO LTD

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 32461/2384, Country of Manufacture: Switzerland Voltage: 380 / 50 / 3 Net weight: 2,200 kg TECHNICAL DATA Nominal centre distance: 600 mm Maximum centre distance between workpiece headstock and tailstock, extended: 750 mm Standard centre height: 125 mm Centre height using interchangeable intermediate plates, workpiece spindle and tailstock: 175 ⇒ 250 mm Maximum possible swing diameter (at 125 mm centre height): 250 mm Maximum swing diameter with intermediate plates: 350 ⇒ 500 mm Worktable swivelling range, both sides: 10° each Maximum length for surface grinding (table width = 200 mm): 900 mm Table speed, hydraulically stepless adjustable: approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding, diameter x width x bore: 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding, diameter x width x bore: 250 x 13 x 76 mm Grinding spindle speeds: 1,500 / 1,700 / 2,200 / 3,600 rpm Swivelling range of grinding spindle head: 270° With locking positions every: 90° Vertical movement of grinding spindle head, centre height: 125–350 mm Cross travel of grinding slide: 285 mm Hydraulic rapid traverse and return of grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev Infeed for plunge grinding: 0–0.9 mm/rev Micro-stop for feed per division: 0.001 mm/rev Swivelling range of workpiece headstock: 360° Workpiece speeds, steplessly adjustable, standard/special: 20–400 / 10–400 rpm Inner taper, workpiece spindle/tailstock: Morse 5/3 Grinding spindle motor, approx.: 4 HP Fpsdpfed Amifox Adgjb Errors or omissions excepted. The technical data is provided without obligation. Inventory No. 2170089, List of machine accessories: 1 Workpiece headstock MK5 1 Sine ruler without comparator 1 Grinding spindle head with 4 drive pulleys 1 Tailstock MK3 1 Collet draw bar with extractor and reducing sleeve B32 1 Internal grinding attachment with quill Fischer UJ50x250 – Drive pulley Ø 48 for 14,000 rpm 1 Rotatable wheel dressing attachment with 50 mm base 1 Table rotation stop without comparator 1 Coolant unit with decanting system 1 Ejector 1 Balancing bar

Kondisi: bekas, Internal diameter: 340/440 mm Grinding depth: 99999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Cross feed (in increments): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (chucked): 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we deliver machines in as-new condition with warranty and can also provide service for your machines (Warranty: 12 months from delivery – for Germany and neighboring countries). Dedicated internal grinding machine with infinitely variable drive 0–100%. Now available in current color schemes!!! Standard centre height: 175 mm. Upgradeable to 225 mm. Fixed internal grinding spindle, belt tension via tension roller! z-axis reversal accuracy max. 0.01 mm! Geometrically overhauled and newly painted with: - New control cabinet - New workpiece spindle motor and controller with three-phase technology - 2-axis digital readout, resolution x-axis 0.5 µm Options: - Rotary encoder with digital readout in workpiece headstock - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, height-adjustable - Increase of centre height to max. 225 mm Included: Fpodpfjd Ih Dxjx Adgsb - Operating tools Further accessories on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as defined in the BetrSichV 2015. Raising the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Kondisi: sangat baik (bekas), Complete Desktop Metal 3D Printer System Here we offer you a complete Desktop Metal 3D printer system. Desktop Metal 3D Printer Studio System Complete system: 3D printer + debinding machine + sintering furnace Manufacturer: Desktop Metal The three-part solution comprises a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: - Printed materials: Metal - Technology: FDM - Application: Industrial - Other features: Office-compatible - X-axis travel: 30 cm (12 in) - Y-axis travel: 20 cm (8 in) - Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, this printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements commonly associated with metal 3D printing and enables new features such as the use of closed-cell infill for lightweight, strong parts. 1.2 Desktop Metal Studio Debinder (Debinding Machine) - Fully automatic debinding - Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic fluid distillation and recycling means no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace - Hybrid technology (microwave & conventional heating elements) - Build volume: 305x205x205 mm - Carbon steel housing - Gas supply: 2 x 900 L gas cylinders - Heating power: 20 kW Features: Fpjdpfek Hz Nqsx Adgob - Function: Sintering - Configuration: Chamber - Heat source: Gas - Other features: High-temperature, automatic - Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace delivers industry-grade sintering in a package suitable for office environments. Built-in, material- and build-specific temperature profiles ensure uniform heating and cooling, avoiding residual stresses typical of laser-based systems. Condition: used / gebraucht Scope of delivery: (see picture) (Subject to modifications and errors in technical data, specifications are subject to change!) If you have further questions, we are happy to answer them by phone.

Kondisi: bekas, Grinding diameter 250, 350, 450 mm Grinding length 600 mm Centre height 125, 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workhead swivelling 360° Grinding head swivelling 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Plunge feed rate 0.001–0.030 mm/Ø Continuous feed rate 0–0.95 mm/Ø Table swivelling ±10° Table longitudinal travel 900 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (unsupported) 130 kg including clamping Fodpjd Ih D Nefx Adgopb Internal spindle mount 70 mm Total connected load 6.5 kW Machine weight approx. 2.2 t Required space approx. 3.1 x 2.0 m As a world-leading company in Kellenberger overhauling / retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer you service for your machines metric overhauled and newly painted. Version R: Machine features central lubrication and roller guides in the flat bed of the X-axis as well as air lift in the grinding headstock. -Digital readout with 2 axes. Resolution X-axis 0.5 µm Available options at extra cost: -Rotary encoder with digital readout in the workhead -Rotary encoder with digital readout in the grinding headstock (no height adjustment via spindle possible) -New sturdy internal grinding attachment with diameter 80mm or 100mm with height adjustment -Increase in centre height to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping tube for chuck Further accessories available on request. The machine tool currently does not comply with the fundamental safety and protection requirements as described in the BetrSichV 2015. An increase in the required minimum level of protection is to be determined by a risk assessment in accordance with BetrSichV.