Mesin penggiling silinder - universal

KELLENBERGER URF320

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Fodjvq R Uzspfx Abhspc Machine was overhauled according to Kellenberger measurement protocol and newly painted. The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process. The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces. Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, jam operasional: 50 h, nomor mesin/kendaraan: 3018-04, Manufacturing origin: Switzerland Voltage: 380/50/3 Fodpfx Absw T Sd Tehspc Net weight: 3,100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre distance: 650 mm Grinding capacity (SpW+bs): 80 Travel: 700 mm LONGITUDINAL SLIDE Max. travel: SpW+50 mm Minimum automatic travel: 1.5 mm Speed: 50-5500 mm/min Reversal dwell: 0-6 sec. Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for the table and workhead CROSS SLIDE Maximum travel: 300 mm Rapid traverse: 60 mm Infeed depth (diameter): 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Incremental feed: 0.001-0.05 mm WHEELHEAD Left wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Spindle speed: 1,670/2,110 rpm Internal grinding spindle unit with belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Infinitely variable spindle speed: 30-1,000 rpm Internal taper: Morse 5 Clamping collets: W-25 Drive power: 0.55 kW Max. workpiece weight between centers: 130 kg Max. permissible load for chuck work: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill travel: 35 mm Precision adjustment for cylindrical correction: ±40 µm TECHNICAL PERFORMANCE: GUARANTEED WORKING ACCURACY Straightness of generatrix over 630 mm: 0.003 mm Roundness in chuck work: 0.0003 mm CONNECTION VALUES Max. power consumption: 13 kVA Permissible voltage fluctuation: -15% / +10% Permissible frequency fluctuation: ±3% Required compressed air pressure: 5 bar All technical data provided without guarantee; subject to errors or omissions.

Tahun pembuatan: 1998, Kondisi: hampir baru (bekas), Laser type: Q-switched pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Fpjdpfjd Dhw Nox Abhoc Beam divergence: 5 mrad multimode, 2 mrad TEM00 Pulse duration (time): CW / 90 ns Max. output power: 65 W (130 W optional) multimode, 16 W single mode Pulse energy: 16 mJ (30 mJ optional) at 3 kHz Operating modes: CW, Q-switched from 0.1 to 100 kHz Beam deflection system: Galvanometer system Line width in mixed mode: approx. 0.12 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Tornos Multiswiss 6x32 Year of manufacture: 2018 Fjdpfx Aowf I Rzebhjpc Operating hours: 14,100 h including various accessories

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Fpjdpfsrz Nflsx Abhjc Painting: The main assemblies will be repainted, the rest of the machine retains its original paintwork Electronics: The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Kondisi: sangat baik (bekas), Perfekt erhaltener sechsspindliger INDEX MS 25 Mehrspindel-Drehautomat mit jeweils sechs Quer- und Längsführungen für Werkzeuge. Der Preis ist verhandelbar und richtet sich nach dem gewählten Zusatzequipment: Spannzangen, Werkzeuge, Späneförderer usw. Die Maschine befindet sich noch im Produktionseinsatz. Besichtigung nach Absprache möglich. Fedpfx Aeqhkukjbhepc

Kondisi: bekas, Clamping plate, scribing/marking plate, surface plate, measuring table, welding table, straightening plate - Clamping plate comes from a measuring machine - Width: 1335 mm - Length: 3000 mm Fedpfefc T Tqex Abhopc - Height: 250 mm - Plate thickness: 40 mm - Plate is reinforced with support ribs - Includes 4 adjustable leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm - Weight: 2749 kg

Kondisi: bekas, Tahun pembuatan: 1992, kecepatan spindel (min.): 7.500 rpm, kecepatan spindel (maks.): 24.000 rpm, 4 motor-driven grinding spindles (liquid-cooled, sealing air / oil mist lubrication) including the REFU HF converter, suitable for example for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 Fjdpfxjl Tn Afs Abhspc 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032, 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter / inverter for supplying the motor spindles GMN tool spindle motor grinding spindle The spindles are fully functional, sold without warranty – year of manufacture approx. 1992 A collection of various grinding spindle shafts / arbor mandrels for grinding wheels is available for these grinding spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries within the European Community.

Kondisi: hampir baru (bekas), Profile grinding machine Utma model P20 Fedpfx Abeff H E Rjhepc

Kondisi: baru, NEW MACHINE Fodeci Tlrepfx Abhepc - Wet suction available in steel or stainless steel - Extraction capacity: 1,650, 3,750, or 7,000 m³/h - Motor: 3, 5.5, or 15 kW