Shrink tunnel

KJ FK 41-21

Tahun pembuatan: 2023, Kondisi: baru, In the field of 3D thermoforming, we also offer presses, turners, film storage paternosters, and brushing machines on Machineseeker! MEMBRANES for membrane presses – made of silicone or natural rubber Top quality and suitable for every membrane press (for film and veneer pressing). You can purchase our membranes pre-cut to your required dimensions or as roll goods. Ppodpfx Abed S Efaouel SILICONE Type: MS-2 Color: milky white Surface: fabric-patterned/smooth Standard widths: 1680/2000 mm Polymer base: silicone Shore/hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 200°C SILICONE Type: MS-1 Color: milky blue Surface: smooth Standard widths: 1600/1800 mm Polymer base: silicone Shore/hardness: 45° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: MNK-2 Color: grey Surface: smooth/fabric-patterned Standard widths: 1700–1750 and 2000 mm Rubber: natural rubber Shore/hardness: approx. 42° Shore Thickness: 2.5 – 4.0 – 5.0 mm Operating temperature: min. -20°C / max. +130°C NATURAL RUBBER Two-layer version for waterbed/oil presses Type: MNK-2 WB Color: grey/black Surface: both sides smooth Standard width: 1700 mm Rubber: natural rubber Shore/hardness: approx. 42° / 60° Shore Thickness: 3.5 – 4 mm Operating temperature: max. 130°C Standard SILICONE Type: RSS Color: red-brown or transparent (other colors on request) Surface: both sides smooth Standard length: cut to size or 10 m roll (other lengths on request) Standard width: 1200 mm – up to 1800 mm on request Polymer: silicone Shore/hardness: 30° – 80° Shore Thickness: 0.5 – 10 mm

Kondisi: baik (bekas), Shrink tunnel from a German manufacturer: - Tunnel opening approximately 500 x 200 mm. - Adjustable temperature up to 250°C and conveyor speed up to 25 m/min. - Selection between fixed or rotating tunnel rods. - Hot air flows at the top and center can be adjusted separately via deflection plates. - Bottom airflow can be switched on separately. Ppodpfjh U A I Rex Abujl - The machine can be moved or secured in place using lockable castors.

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas),

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational Psdpsvwlqqsfx Abuopl - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), Consisting of two toothed belt axes EGC-80-1300-BS-10P-KF-0H-ML-GK and four linear guide rails HGR 20C 1705V9-10A00 with HIWIN linear block HGW CCC 170 3W3-10200. Ppedpfx Asg Ixumebuol Two Unimotors 075E3C300BACAA075140 with two EMERSON UNIDRIVE M 701-3200050A.

Kondisi: bekas, hydraulische-tafelschere-steiner-hts30-20r Ppjdpfx Abed Hxx Ajusl

Kondisi: baik (bekas),

Tahun pembuatan: 2017, Kondisi: sangat baik (bekas), Bluhm Weber Legi-Air 4050 Labeling Machine Additional units in stock! Year of manufacture: 2016–2019 Print resolution: 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed: Up to 400 mm per second Tamp sizes (mm): Tamp-blow standard from 12.5 x 7 to 160 x 300 mm. Label lengths must be limited accordingly. For certain label qualities, longer or smaller labels are possible with special tamps. Label gap: Minimum 3 mm Label roll: 300 mm diameter, up to 450 linear meters, core 76 mm (3"), outside winding (optional inside winding) Ppodpfxefp A I Eo Abujl Data interfaces: RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W): 770 x 560 x 580 mm Applies to systems with 250 mm stroke Controller display: Multilingual operator guidance 5.7" VGA touch display Service interval indicator Retrieve, edit, and store label data USB port for storage device or keyboard Compressed air connection: 6 bar; compressed air must be clean, dry, and oil-free.

Kondisi: bekas, Pneumatic folding and bending machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending of sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Ppodpfxedzqble Abusl Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via threaded clamping screws Space requirement L x W x H: 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. The folding produces a rounded edge that reduces the risk of injury from cuts on the sharp sheet edges. Ideal for sheet metal processing in furniture manufacturing, cladding panels, or for ventilation and silencer construction.

Kondisi: bekas, Tahun pembuatan: 1989, Halbautomatische Winkeleinschweißmaschine – Semi-automatic Angle Sealing Machine Kallfass KC5050/400, Year 1983, Serial No. V 6.83.1891 - Mounted on mobile frame Ppodpfx Aoinla Tjbuel - After sealing: automatic transport into shrink tunnel - Online video inspection possible via Skype - We would be pleased to welcome your visit – more machines in stock - Immediately available – inspection possible - Located at our warehouse in Emskirchen / Nuremberg – test run available