Mesin penggulung lembaran 4-gulungan hidrolik

KK-Industries CY4R-HHS 140-20/4.0

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Bsdpfxed Ab H Ho Abhswh Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Tahun pembuatan: 1991, Kondisi: baik (bekas), nomor mesin/kendaraan: 07282, Offer 22336 Technical Data: - Max. working width: 3030 mm - Max. sheet thickness without pre-bending: 4 mm - Max. sheet thickness with pre-bending: 3 mm - 3 driven rollers - Roller diameter, top / bottom: 205 / 185 mm - Working speed: m/min - Drive – brake motor: 400 V / 7.5 kW - Required space (approx.): W 5500 x D 1400 x H 1300 mm - Weight (approx.): 4.7 t - With pre-bending function - Rear roller adjustable at an angle Bwodpfxomdqlle Abheh - Swing-out bearing for top roller - Extended roller ends for mounting profile rollers - Forward and reverse operation - Separate control panel

Kondisi: baik (bekas), Tahun pembuatan: 2022, CNC lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of manufacture: 2022 Controlled Axes: X / Z TECHNICAL DATA Turning length: 540 mm Spindle: Motor spindle 11/16 kW Tool holder: VDI30 with 12 positions Main spindle: AC motor - Speed: up to 5,000 rpm - Spindle nose: Main spindle A2-6" - Drive power (100/40% duty cycle): 11/16.5 kW Turret: 12-position - Driven: 12 stations - Tool holder: VDI 30 FEATURES + Technology cycle for applying alternating spindle speed for vibration-critical clamping operations + Direct path measuring system on X-axis Bodjw Hxi Dspfx Abhewh + Programmable positioning and pressure force + Ergonomic DMG MORI SLIMline® control panel + Hollow clamping device, max. bar capacity D65 mm + Tailstock, hydraulically movable via M function + External electronic handwheel + Chip disposal package: + Chip conveyor with right-sided discharge instead of chip tank + 4-color signal lamp + Differential pressure clamping for main spindle + Foot control pedal for tailstock + Automatic NC tailstock. Maximum machining flexibility – full capability to control force in the range from 0.7 – 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar + Manual tool measuring device in the working area, make: MARPOSS + Mechanical oil mist separator, type AFS 600 Modifications and errors in the technical data and information excepted.

Kondisi: baru, en-GB: GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Round tubes, square tubes, rectangular tubes, solid bars, and all types of profiles. Materials: Hard or mild steel, non-ferrous metals, plastics. Process: After setting up the workpiece support and the lateral stops, the burred workpiece is simply held against the brush, which rotates around its own axis. The workpiece itself is not rotated – this motion is performed by the brush. The material of the workpiece, burr thickness, and desired edge rounding determine the contact pressure and duration, typically around 1-5 seconds. Technical specifications: Material: Steel, stainless steel, and non-ferrous metals (motor speeds 700–1,900 rpm, steplessly adjustable) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Brush dimensions: 2 pieces Ø 300 (250) x 50 mm or 3 pieces Ø 300 (250) x 35 mm Drive power: 3.0 kW Power consumption: 3.5 kW Operating voltage: 3~, 400 Volt, 50 Hz Rated current: 8A Bwjdpfx Abod Hmnfjhjh Fuse: max. 16A Control voltage: 24V DC Width: approx. 500 mm + handwheel 74 mm + extraction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), when processing a workpiece at max speed 82 dB(A) Scope of delivery: - Rotational head deburring brush machine GratMaxx with power socket (without cable) - Workpiece support table with adjustable angle stop and workpiece stops - Tool for brush replacement - Brushes not included in the scope of delivery! Accessories: F50201 Wire brush, twisted wire 0.38 mm F50202 Wire brush, steel wire 0.2 mm F50203 Wire brush, steel wire 0.38 mm F50204 Wire brush, stainless twisted wire 0.38 mm F50205 Abrasive nylon brush U180 F50206 Abrasive nylon brush U120 F50207 Wire brush, stainless wire 0.20 mm For further technical data, please refer to the attached PDF document.

Kondisi: bekas, Tahun pembuatan: 2013, produsen pengendali: Siemens, model controller: 840Dsl, Description: Main Spindle: Technology: Motor spindle Bjdpfx Aew Tg Adjbhewh Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Sub Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Z-axis travel: 750 mm Tool Turret I (X/Y/Z): Technology: 12-station turret Tool interface: VDI30 Driven tools: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Turret II (X/Z): Technology: 12-station turret Tool interface: VDI30 Driven tools: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Features/Accessories: Chip management: Chip conveyor Coolant management: High-pressure internal coolant pumps, 14 bar Barfeed: Short bar loader, EMCO LM 1200 Finished part removal: Workpiece picker (pneumatic) with conveyor belt Oil mist extraction: Mechanical separator, make Absolent Tool holders: Various static and driven holders Additional equipment: Spindle chiller unit

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 1.200 h, X 800 mm Y 460 mm Z 510 mm Styrsystem: FANUC Bwodov Th E Aepfx Abhjh Spåntransportör Inklusive 4-axlig rundbord.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 21.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S4E184001, diameter putar di atas sled silang: 430 mm, panjang pembubutan: 670 mm, diameter pembubutan: 220 mm, lubang spindel: 45 mm, kecepatan spindel (maks.): 6.300 rpm, berat keseluruhan: 4.300 kg, Mesin bubut CNC hard turning bekas dengan spindle tambahan Merek: EMCO Tipe: Emcoturn 45E Tahun pembuatan: 2018 Jam operasi rendah Kontrol: Siemens 828D Jumlah alat: 12 unit berpengerak Kecepatan maks.: 0-6000 rpm Bodjw Rrvwjpfx Abhswh

Kondisi: bekas, Tahun pembuatan: 2021, Area kerja 3000 x 1500 mm Kapasitas laser maksimum 4 kW (TruDisk 4001) Bwjdpfexr U U Rox Abhsh Ketebalan pelat maksimum 25/20 mm (st. 37/Stainless) Kamera terintegrasi untuk pemantauan proses (dengan antarmuka monitor) Kontrol: Siemens Sinumerik 840 D SL dengan layar sentuh 18” Pengaturan kecepatan otomatis Pemadaman otomatis yang dapat diprogram Paket pemotongan tembaga Paket pemotongan kuningan Dilengkapi dengan: Penukar palet otomatis Harga perolehan pada tahun 2021: Dkk. 2.700.000 belum termasuk PPN.

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 410 mm, jarak gerak sumbu Z: 450 mm, model controller: Heidenhain, kecepatan rotasi (maks.): 12.000 rpm, Vertical Machining Center YCM NXV600A - Demonstration Machine - Control: Heidenhain TNC620 Bwsdpfx Asvvuh Aebhoh Spindle: 12,000 rpm, SK40, 17 kW Coolant system with 20 bar through-spindle coolant (IKZ) Handwheel Tool changer: 24 stations Chip conveyor The machine is located at our site in Soltau and can be inspected under power at any time!

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Bedpfjt Hw Iijx Abhjwh Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice