Mesin penggulung lembaran 4-roll hidrolik

KK-Industries CY4R-HHS 190-20/8.0

Kondisi: bekas, Arbeitslänge: 5.500 mm Blechstärke: 13 mm Kfsdpfx Aae Dvliohoa Technische Merkmale: * 3-Walzen-Betrieb * Oberwalzendurchmesser: Ø 500 mm * Seitenwalzendurchmesser: Ø 300 mm (jeweils) * Hydraulische Halter links/rechts * Hydraulischer Hebeturm * Hydraulische Vorbiegung

Kondisi: baru, Bending: 13.0 mm; Sheet length: 3100 mm; Sheet thickness: 16.0 mm; Total connected load: 17.5 kW; Weight approx.: 11.6 t; Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roller diameter Pre-bending: 13.0 mm » at 1.5x top roller diameter Top roller diameter: 300 mm Bottom roller diameter: 270 mm Kfedpfx Aajd Auacjhja Side roller diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Cone bending device • Hardened rollers • Hydraulic adjustment of side rollers, synchronized via PLC • Hydraulic adjustment of bottom roller via torsion bar • Pressure-adjustable bottom roller • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes for cone rolling: • The max. sheet thickness is 50% of nominal capacity • The cone length may be max. 30% or must be more than 60% of the roller length • Hardened rollers are recommended

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Kjdpfx Aasd Ab H Hjhofa Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Tahun pembuatan: 2024, Kondisi: baru, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration site in Staufenberg. Further machines are available for demonstration at our facilities in Staufenberg. Further information is available upon request. Kodpfx Ajftdh Ieahofa

Kondisi: baik (bekas), Technical Specifications: Working length: 2100 mm Max. bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Number of driven rollers: 3 Hydraulic drop-end bearing Kfodpfx Aaewchn Uehea Cone bending device Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE marking Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Multiple sets of rolls for tube and profile rolling The seller accepts no liability for typographical or data transmission errors. The machine’s condition regarding appearance, technology, and wear is appropriate for its age; used machines are sold without any warranty.

Kondisi: baru, Ostas 3-Roll Plate Rolling Machine SMR-S 2070 x 190 Technical Specifications: Special equipment included in the price: - Motorized adjustment of lower rolls - Hardened rolls - Motorized adjustment of rear roll - Digital display Sheet width: 2070 mm Max. sheet thickness: 7.0 mm Pre-bending thickness: 6.0 mm Roll length: 2070 mm Smallest bending diameter: 285 mm Roll diameter: 190 mm Weight: 3480 kg Dimensions (L x W x H): 3750 x 920 x 1260 mm Motor: 4 kW Features: - Top and bottom rolls electrically driven - Swing-out top roll - Cone bending device Kodpfx Aaeg Nz T Iehsfa - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating console - Safety cable, CE-marked

Kondisi: hampir baru (bekas), Hydraulikpresse mit 2 Ständern Kfodpfx Asghl N Ueahoa Presskraft: 200 t Hub oberer Zylinder: 500 mm Hub unterer Zylinder: 200 mm Gesamtmaße: 1800x2200x3700 mm Leistung: 10 PS Gewicht: 8,4 t

Kondisi: baru, Tahun pembuatan: 2025, - Capacity 700 x 2 mm - Conical bending - Removable upper roller - Foot pedal control - Emergency stop - Documentation Ksdpfxjihv Hps Aahefa - 400V

Kondisi: baru, Bending: 10.0 mmSheet length: 2550 mmSheet thickness: 13.0 mmTotal power requirement: 15.0 kWGross weight approx.: 10.6 tDimensions (LxWxH): 4.76x1.66x1.59 m Image similar Bending capacity: 13.0 mm • at 3x top roll diameter. Initial pre-bending: 10.0 mm • at 1.5x top roll diameter. Top roll diameter: 270 mm Bottom roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive for top and bottom rolls via planetary gearbox • Digital display for side roll positions • Hydraulic drop end bearing Kfjdpfx Ajd Ab H Ioahea • Infinitely variable rolling speed • Cone bending device • Hardened rolls • Hydraulic positioning of side rolls synchronized by PLC • Hydraulic positioning of bottom roll by torsion shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Machine and equipment conform to CE regulations For catalog, see the following link: Important notes for cone bending: • The max. sheet thickness is 50% of the rated capacity • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: baru, Sheet length: 3100 mm Sheet thickness: 10.0 mm Pre-bending: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 9.7 t Dimensions (L x W x H): 4.88 x 1.16 x 1.18 m Illustration similar Bending capacity: 10.0 mm » at 3x top roll diameter Pre-bending: 8.0 mm » at 1.5x top roll diameter Top roll diameter: 270 mm Bottom roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic bottom roll adjustment via torsion shaft • Pressure-adjustable bottom roll • Electric and hydraulic overload protection • Movable control console • Operating manual in GERMAN and ENGLISH • Machine and equipment compliant with CE regulations Important notes for conical rolling: • Maximum sheet thickness is 50% of the nominal capacity • Cone length must not exceed 30% or must be more than 60% of the roll length • Hardened rolls recommended Kfodpfxed Ab H Ee Aahoa