Mesin penggulung lembaran 3-roll dengan penggerak listrik

KK-Industries CYL 130-20/4.0

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, S&F Drum Chipper Type ATH 220x530/3 Demonstration Machine / Trade Fair Machine / New Machine Robust construction for long service life Feed height: 200 mm Feed width: 500 mm Number of chipper blades: 2 units Number of counter blades: 1 unit Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 units Throughput capacity: up to approx. 20 cubic meters per hour* Chip length: approx. 30 mm Chipper drive power: 45 kW or as agreed Feed roller drive power: 2 x 2.2 kW Operating / control voltage: 400/220 V, 50 Hz Hodsw I R Rnepfx Ad Rsr Weight: 2,600 kg *Depending on chip length, main motor kW rating, blade count, and feed method S&F chippers and drum chippers with horizontal feed are used in various sectors of the wood processing industry (sawmills, timber plants). Chippers of the “ATH” series produce high-quality, homogeneous wood chips from wood residues with minimal fines, e.g., as premium chips for the cellulose industry or as fuel chips for energy generation. Advantages: - Maximum throughput - Low fines content - Low maintenance - Versatile application - Custom manufacturing available Need more information? Contact us! We are happy to advise you. Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood crusher

Kondisi: baru, Bending: 10.0 mmSheet length: 2550 mmSheet thickness: 13.0 mmTotal power requirement: 15.0 kWGross weight approx.: 10.6 tDimensions (LxWxH): 4.76x1.66x1.59 m Hsdpfx Aed Ab H Ijd Rer Image similar Bending capacity: 13.0 mm • at 3x top roll diameter. Initial pre-bending: 10.0 mm • at 1.5x top roll diameter. Top roll diameter: 270 mm Bottom roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive for top and bottom rolls via planetary gearbox • Digital display for side roll positions • Hydraulic drop end bearing • Infinitely variable rolling speed • Cone bending device • Hardened rolls • Hydraulic positioning of side rolls synchronized by PLC • Hydraulic positioning of bottom roll by torsion shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Machine and equipment conform to CE regulations For catalog, see the following link: Important notes for cone bending: • The max. sheet thickness is 50% of the rated capacity • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: baru, Sheet length: 2050 mm Sheet thickness: 3 mm Total power requirement: 2.2 kW Weight approx.: 1,500 kg Dimensions (LxWxH): 3,200 x 750 x 1,000 mm Technical Data Roller diameter: 130 mm Hedpfx Adod Ab H Ae Rer Features • 3 rollers • Asymmetrical roller configuration with pre-bending • 2 driven rollers via brake motor • Swiveling top roller to the front • Forward/reverse operation • Cone rolling by tilting the rear roller • Mobile control console Operating manual in GERMAN Catalog available at the following link:

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double miter bandsaw for fast cutting Hedpfxefg E Hme Ad Rsr with pusher system P15, option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in combination with a reliable hydraulic brake with large radial center positioning. The work table is mounted on high-quality preloaded bearings which ensure very smooth rotation. CNC control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Double-sided clamping positioning system The B&S pusher system, feeding and positioning unit, features "double-sided opening grippers" which are hydraulically operated. This guarantees secure gripping and transporting of materials and bundles that may deviate from the ideal shape. The pusher system is built as a separate unit and runs on ball-bearing linear guides, a ground rack, and is powered by a frequency-controlled, robust geared motor.

Kondisi: baru, Cesurbend 3-Roller Round Bending Machine MRS 1550 x 140 Technical Specifications: Special features included in the price: - Motorized adjustment of lower rolls - Hardened rolls - Motorized adjustment of rear roll - Digital display Sheet width: 1550 mm Sheet thickness: max. 5.0 mm Sheet thickness (pre-bending): 4.0 mm Roll length: 1550 mm Roll diameter: 140 mm Weight: 1360 kg Dimensions (L x W x H): 2320 x 850 x 1200 mm Motor: 2.2 kW Equipment: - Electrically driven top and bottom roll Hodpfx Adehrdmme Rsr - Swiveling top roll - Cone bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating console - Safety cable Specifications apply to St-37 / 240 N/mm² CE marking

Kondisi: baru, diameter roller (bawah): 140 mm, diameter rol atas: 140 mm, diameter roll samping: 140 mm, diameter rol: 140 mm, panjang rol: 2.070 mm, ketebalan pelat baja (maks.): 4 mm, Perlengkapan: alat pembengkok kerucut, dokumentasi / manual, henti darurat, rol atas yang dapat berputar, rol yang dikeraskan, - Capacity 2070 x 4 - Electrically adjustable trailing roller - Electrically adjustable lower roller (material clamping) - Digital display for rear roller movement - Digital display for lower roller movement (material clamping) - Infinitely variable speed control - Hardened rollers Hsdpfohvr Nlex Ad Rsr - Conical rolling - Removable top roller - Brake motor - Emergency stop - Documentation - 400V

Kondisi: baru, Drilling capacity in steel (diameter): 50.0 mm Throat depth: 300 mm Drilling stroke: 160 mm Thread cutting: M 30 Speed range: 100 - 1600 rpm Table size: 615 x 430 mm Drill spindle Morse taper: 4 short taper Column diameter: 145 mm Feed rates: 0.1-0.2-0.3-0.4 mm/rev Distance spindle/table: 147 / 688 mm Motor power: 1.8 / 2.9 kW Weight: 450 kg Machine height: 1865 mm Equipment: - Automatic feed with electromagnetic feed clutch - 4 feed rates: 0.1-0.2-0.3-0.4 mm/rev - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Spindle guard with electrical interlock - Digital speed display - Machined base plate - Motor 1.8 / 2.9 kW - 100 - 1600 rpm Special accessories included: - LED machine lamp pos. 12 - Thread cutting attachment pos. 20.0 (Thread cutting with stop) Hjdpfx Aoxabq Ied Ror - Coolant device "A" pos. 24 (Coolant base plate, complete) - Digital drilling depth display pos. 37.1 (5-digit LED display)

Kondisi: baru, Sheet thickness: 1.8 mm Bending length: 1050 mm Top roll diameter: 70 mm Sheet length: 1050 mm Hedpfsd Ab T Ssx Ad Rer Details: - Cast iron body - Motorized bending - Cone bending device - Manual adjustment of the rear and lower rolls via handwheel - Portable control panel - Compliance with CE standards Options: - Rear roll with motor EURO 825 - Digital display for rear roll position EURO 1,010 - Machine body cover EURO 274 - Hardened rolls EURO 392

Kondisi: baru, Drilling capacity in steel (diameter): 60.0 mm Thread cutting: M 42 Throat: 350 mm Drilling stroke: 200 mm Speed range: 60 – 1530 rpm Table dimensions: 720 x 510 mm Drill spindle Morse taper: 4, short taper Column diameter: 200 mm Feed rates: 0.15 – 0.2 – 0.3 – 0.36 mm/rev Distance spindle / table: 159 / 884 mm Motor power: 3.6 / 4.3 kW Weight: 605 kg Machine height: 1950 mm Equipment: - Automatic feed with electromagnetic feed clutch - 4 feed rates: 0.15 / 0.2 / 0.3 / 0.36 mm/rev - Stepless speed adjustment - Digital speed display - Feed overload protection - Spindle guard with electric interlock - Digital speed display - Machined base plate Including special equipment: - Coolant system mounted in base, pos. 24 - Thread cutting device, pos. 20.0 - LED machine lamp, pos. 12. Hsdpfx Ajxabgijd Rsr

Kondisi: bekas, nutenbreite-werkzeuglange-arbeitsgeschwindigkeit-zugkraft-hub-ma schinengewicht-sortiment Hjdpfx Adsyz Dgdj Rjr