Mesin penggulung lembaran 3-roll dengan penggerak listrik

KK-Industries CYL-ST 140-25/4.0

Kondisi: baru, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw blade length: 5980 x 41 x 1.3 mm Table height: 800 mm Blade speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.8 t Dimensions (L x W x H): 3.0 x 2.15 x 2.2 m Lrjdpfx Agofg E Hwjijw SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series impresses with its advanced technology, high quality, durability, and an unrivaled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the blade) • Inch mode for positioning • Bundle clamping electrically and hydraulically pre-installed • Chip conveyor The SNC 20 control system enables convenient and uncomplicated input of up to 20 different sawing jobs (length and quantity). Once the desired dimension is entered, the control system automatically calculates the kerf and the number of feed cycles. Additionally, the error code display system enables rapid fault analysis and troubleshooting.

Kondisi: bekas, Tahun pembuatan: 2004, Technical Details: Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Ledpeu Ix Izsfx Agijrw Turning length: 4,000 mm Center distance: 4,000 mm Faceplate diameter: 800 mm Control: Siemens 810D Speed: 1 – 1,600 rpm / 2-step Spindle torque: 6,000 Nm Feed drive AC: X = cross + Z = longitudinal: 16,000 / 20,000 N Rapid traverse X-axis: 4 m/min Rapid traverse Z-axis: 7 m/min Spindle bore: 130 mm (Spindle nose DIN 55027 size 11) Operating hours/power on hours: to be read out Tailstock quill taper: ISO MK 6 Tailstock quill stroke: 350 mm Max. workpiece weight between centers: 5,000 kg Max. workpiece weight – unsupported: 1,800 kg Interface: RS 232 / V24 Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Total power consumption: approx. 52 kW Machine weight approx.: 14.0 t Approx. machine dimensions LxWxH: 2.6 x 9.1 x 2.5 m Cycle turning lathe with Siemens cycle control Motor: 37 kW, nominal speed 1,500 rpm; max. speed 6,500 rpm; torque 235 Nm two gearbox shift ranges Stage II: spindle torque 258.9 to 1,364.6 Nm Stage I: spindle torque 1,050.4 to 5,536.1 Nm Feed drive: three-phase servo drive 2x chip conveyors Double electrical cabinet Parat quick-change tool holder Coolant system Including various accessories (see photo), as well as steady rest and 3-jaw chuck Ø 500 mm Rota-S plus

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability Lsdod Ab H Hepfx Agijrw • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Tahun pembuatan: 2024, Kondisi: baru, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Lodpfxeftdh Is Agierw Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration site in Staufenberg. Further machines are available for demonstration at our facilities in Staufenberg. Further information is available upon request.

Tahun pembuatan: 1960, Kondisi: baik (bekas), nomor mesin/kendaraan: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and 300 mm center of gravity offset: 10 t Load capacity with vertical faceplate position and 830 mm center of gravity offset: 5.5 t Faceplate dimensions: 1500 x 1500 mm Lsdpfecblc Sjx Agijrw Faceplate speed hydraulically infinitely variable: 0.025 - 0.75 rpm Tilting range: 0 - 135° Tilting time for full range upwards: 140 s Tilting time for full range downwards: 120 s Hydraulic drive: 380 V Height of tilting axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Kondisi: bekas, Tahun pembuatan: 2019, jam operasional: 35 h, daya: 37 kW (50,31 hp), Perlengkapan: kabin,

Kondisi: baru, Dimensions (LxWxH): 3,600 x 1,120 x 1,020 mm Approximate Weight: 2,400 kg Total Power Requirement: 4 kW Bending Stroke: 5 mm Sheet Thickness: 6 mm Sheet Length: 2,030 mm Technical Data Roller Diameter: 170 mm Ljdjd Ab Haspfx Agierw Equipment • 3 rollers • Asymmetrical roller arrangement with pre-bending • Top roller can be swung out forwards • Motorized right/left control • Conical bending by tilting the rear roller • Operation via foot pedal • Hardened rollers • Digital display For the catalog, please see the following link:

Kondisi: baru, Load capacity: 5,000 kg Length: 5,000 mm Width: 2,000 mm Height: 500 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight: approx. 1.0 t Required space: approx. 6.3 x 2.0 x 0.5 m Heavy-duty trailer featuring: - Double-turntable steering - Small turning radius Ledpfxofrzu So Agierw - Tip-proof due to steering angle limitation - Sturdy design, low maintenance - Swappable drawbar - 30 mm impregnated wooden platform - Coupling eye diameter: 40 mm - Standard paint finish changes. Available in your desired RAL colour upon request. Looking for different load capacities or dimensions? Please contact us. Price on request.

Kondisi: baru, Bending: 10.0 mmSheet length: 2550 mmSheet thickness: 13.0 mmTotal power requirement: 15.0 kWGross weight approx.: 10.6 tDimensions (LxWxH): 4.76x1.66x1.59 m Image similar Bending capacity: 13.0 mm • at 3x top roll diameter. Initial pre-bending: 10.0 mm • at 1.5x top roll diameter. Top roll diameter: 270 mm Bottom roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive for top and bottom rolls via planetary gearbox • Digital display for side roll positions Lodpfxed Ab H Io Agierw • Hydraulic drop end bearing • Infinitely variable rolling speed • Cone bending device • Hardened rolls • Hydraulic positioning of side rolls synchronized by PLC • Hydraulic positioning of bottom roll by torsion shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Machine and equipment conform to CE regulations For catalog, see the following link: Important notes for cone bending: • The max. sheet thickness is 50% of the rated capacity • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: baru, - Capacity 2070 x 6 mm - Electrically adjustable rear roller - Electrically adjustable lower roller (material clamping) - Digital display for rear roller movement - Digital display for lower roller movement (material clamping) - Hardened rollers - Conical bending - Swing-out top roller - Central lubrication system - Brake motor - Emergency stop - Documentation - 400V Ledjlht N Iepfx Agierw