Penggiling sabuk internal bilah rotor

KMU RFSM 2000

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition Nsdpfx Aajd N H A Nshjlk

Kondisi: baik (bekas), Tahun pembuatan: 1962, Radial arm drilling machine, pillar radial drilling machine, bench drilling machine, radial arm drill, high-speed radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Spindle taper: MT4 Nodpfoirax Usx Aahslk - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Tahun pembuatan: 1960, Kondisi: baik (bekas), nomor mesin/kendaraan: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and 300 mm center of gravity offset: 10 t Load capacity with vertical faceplate position and 830 mm center of gravity offset: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed hydraulically infinitely variable: 0.025 - 0.75 rpm Nlsdpjcblc Ssfx Aahsk Tilting range: 0 - 135° Tilting time for full range upwards: 140 s Tilting time for full range downwards: 120 s Hydraulic drive: 380 V Height of tilting axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, AMADA MODEL HFT 8025 - hydraulische Abkantpresse mit 80 t Presskraft und 2500 mm Biegelänge, inklusive CD 2000 4-Achs Farb-Grafik CNC-Steuerung. Ausgestattet mit ERWIN SICK maschinenmontierten elektronischen Schutzeinrichtungen sowie seitlicher und hinterer Gitterabtrennung mit Sicherheitsverriegelung. Modell: Amada HFT 8025 CNC-Abkantpresse mit Downstroke Baujahr: 2004 Presskraft: 100 kN Steuerungstyp: CD 2000 CNC Gesteuerte Achsen: Y1, Y2, X, R Max. Biegelänge: 2.500 mm Max. lichte Höhe: 470 mm Hub: 350 mm Eilgang: 100 mm/sec Biegegeneschwindigkeit: 1 – 10 mm/sec Rücklaufgeschwindigkeit: 1 – 100 mm/sec Ölvolumen: — Motorleistung: 7,5 kW Maschinengewicht: 6.100 kg Tischlänge: 2.500 mm Tischbreite: 60 mm Lichte Höhe: 470 mm Nledpfx Aeu A Dgreahok Ausladung: 420 mm CNC-Steuerung: vorhanden Hinteranschlag (X-Achse): - Verfahrweg: 700 mm/s - Maximalanschlag: 1.000 mm - R-Achse: 250 mm Vorführung unter Strom möglich. Broschüre und weitere Informationen auf Anfrage erhältlich.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. Nsdopugwijpfx Aaholk The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Kondisi: seperti baru (mesin pameran), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Njdpfx Ajpgmufjahslk Belt dimensions: 2000 x 150 mm Belt speed: 18/37 m/sec Power: 2.2/3.8 kW 400V/50Hz Weight: 110 kg Technical data and dimensions: Subject to change/errors excepted

Tahun pembuatan: 1990, Kondisi: bekas, nomor mesin/kendaraan: xxxx; Lg-Nr. 17250, Technical Data: Nlodpfx Aedd Ilxsahek - Carrying capacity approx. 200 kg - Outreach 800 mm - Working height in horizontal position approx. 1000 mm - Boom arm motorized, rotatable left and right - Boom arm manually tiltable - Faceplate motorized, rotatable left and right - Faceplate speed continuously adjustable - Faceplate diameter 300 mm - Swiveling control panel with ESAB controls, - Type 6 PTF, Year 97 - Required space approx. W 1100 x H 1300 x D 1600 mm - Weight approx. 300 kg

Tahun pembuatan: 2015, Kondisi: bekas, Container rotator, welding table, welding positioner, roller stand 1000 kg load capacity With foot remote control Continuously variable speed control from 80 to 1600 mm/min Nljdpfxoc Ny H Ae Aahjk Diameter range: 20 mm to 700 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach. Nlsdpfx Aaotmqi Djhok

Kondisi: bekas, Tahun pembuatan: 1990, nomor mesin/kendaraan: 2316-3, 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm Nlodpju Et Nbsfx Aahek - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. spindle-to-table distance: 300 / 700 mm - Min./max. drilling radius: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement (approx.): W 1300 x H 2800 x D 2300 mm - Weight (approx.): 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Vertical T-slots on the left-hand side of the machine