Mesin lipat

KRAMER AM-aut II 2000/2,25

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Gedpfsxddvnjx Adtoil Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: baru, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special features included in the price: - 3 driven rolls - Digital display - Includes standard roller set for steel Gedpfx Adsg Tzbwetsil Description Hydraulic / motor-driven ring bending machine Usable horizontally and vertically, with 3 powered rolls All 3 rolls are motor driven Upper roll adjustment is hydraulic Rolls are hardened Left/right rotation via foot pedal Roll shaft diameter: 50 mm Roll diameter (top): 158 mm Roll diameter (bottom): 158 mm Speed: 4.5 m/min Motor power: 0.75 + 1.5 kW Electrical connection: 400 V Complies with CE standard Weight: 420 kg

Kondisi: baik (bekas), Tahun pembuatan: 1978, ketebalan lembaran kuningan (maks.): 3 mm, Motorised swing bending machine Manufacturer: Lotze Model: HZ – 2500 x 3mm Year of manufacture: 1978 Technical data Giedpfx Adorc E S Estol Make: Lotze Model: HZ-25 Year: 1978 Working length: 2500 mm Sheet thickness: max. 3 mm Equipment - Bending angle adjustment via potentiometer - Tool package including sharp rail, bending rails, reinforcement rails - Manually adjustable back gauge All information provided without guarantee.

Tahun pembuatan: 2022, jam operasional: 0 h, Kondisi: baru, Mobile cleaning centrifuge including buffer tank for wastewater, agitator, and double-diaphragm compressed air pump. - New machine - Numerous other variants and special configurations available on request Machine type: Process water centrifuge for solid-liquid separation Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: Mass finishing technology, general solid-liquid separation, coolant filtration, wet blasting systems, ... Advantages: - High output capacity thanks to acceleration forces in the unit exceeding 1,800 times gravity - Recirculating the process water reduces operating costs and is environmentally friendly Giedpfsf Sqfqox Adtol - Savings on expensive additives for the mass finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process fluids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Looking for innovative solutions for surface finishing and process water treatment? We offer a wide range of equipment for mass finishing, drying, and process water technology, tailored precisely to your application. From development to production: We supply all of our products from a single source, and all are “Made in Germany.” ----- Please feel free to contact us—we are happy to provide free and non-binding advice. ----- The European Commission provides a platform for online dispute resolution (OS platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first prepare a non-binding quotation for you, which also includes information about our general terms and conditions and right of withdrawal with imprint, prior to purchase/contract conclusion.

Kondisi: bekas, hydraulische-tafelschere-steiner-hts30-20r Gedpfx Adjd Hxx Astoil

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, Technical data: Maximum cutting width: 3100 mm Maximum cutting capacity (steel St40): 15.0 mm Motorized, adjustable back gauge: 1500 mm Motorized, adjustable cutting gap Adjustable cutting angle Working height: 860 mm Motor power: 22 kW Side safety fence with rear light barrier Dimensions (L x W x H): approx. 4650 x 3600 x 2050 mm Weight: approx. 13.5 t We can only present a small portion of our current range of used machines here. Please also visit our website! Gsdpfx Aeummw Tedteil The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Kondisi: baik (bekas), Tahun pembuatan: 1989, nomor mesin/kendaraan: 01-15792, Offer 24194 Technical Specifications: - Max. working width: 2040 mm Giodpfx Adotylguotel - Max. material thickness: 2 mm - Bending angle: approx. 0 – 135° - Bending angle lockable with end stop - Upper beam operated via side handwheel - Max. upper beam stroke: 85 mm - Max. adjustment of bending beam: 80 mm - Bending process assisted by counterweight - Required space: approx. W 3250 x H 1250 x D 450 mm - Weight: approx. 1620 kg

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 550 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 36 m/menit, produsen pengendali: Siemens, model controller: 828D + Shopmill, tinggi total: 2.560 mm, panjang total: 2.350 mm, lebar total: 2.160 mm, lebar meja: 550 mm, panjang meja: 1.000 mm, beban meja: 800 kg, berat keseluruhan: 4.300 kg, kecepatan spindel (min.): 100 rpm, kecepatan spindel (maks.): 10.000 rpm, pasokan pendingin: 20 batang, jarak dari tengah meja ke hidung spindel: 700 mm, hidung spindel: SK 40, jumlah slot dalam magazin alat: 30, panjang alat: 300 mm, diameter alat: 76 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Travel paths X/Y/Z: 850/550/550 mm Max. speed range: 10,000 rpm Drive power AC (40%): 13.5 kW (Siemens) Vertical tool magazine for 30 tools Tool holder: SK 40 Rapid traverse X/Y/Z: 36/36/36 m/min Including equipment such as: - Preparation for 4th & 5th axis - Robust roller guides on all axes - Spindle cooling system (oil cooling) - Fast double-arm changer with pre-selection and vertical magazine for 30 tools - Hinged belt chip conveyor Gsdpfx Aedkh Tisdteil - Coolant through the spindle with 20 bar high-pressure pump - Air blow-through via the spindle - Coolant pistol - Mobile electronic handwheel Upon request, we can offer this machine including a suitable rotary table for 4th & 5th axis. Please specify this in your inquiry!

Kondisi: bekas, Combined profile steel shear and punching machine GEKA type HYD 80 / Hydracrop 80/A Mach. no. 9566 Year of manufacture approx. 2000 Punching force 80 tons Throat depth 300 mm Punching up to Ø 40 mm in 14 mm sheet Flat bar shear 450 x 15 mm Angle steel shear 130 x 130 x 13 mm Square shear 45 x 45 mm Round bar shear Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Electrical connection 400 Volt, 50 Hz - Back gauge with electric stroke release 500 mm - Work table with back gauge at punching station 550 x 380 mm - Working height at punching station 1100 mm - Work table with back gauge at rectangular notcher 550 x 400 mm - Working height rectangular notcher 930 mm Gsderz Tutspfx Adtoil - approx. 21 various punching tools - Operating instructions - Original paintwork, not repainted Required space L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons Very good condition

Tahun pembuatan: 1981, Kondisi: baik (bekas), nomor mesin/kendaraan: 3626, OFFER 21448 Technical Data: - Max. working width: 2540 mm - Max. cutting capacity (mild steel S235): 4 mm - Motorized cutting angle adjustment - Adjustable cutting gap via graduated adjustment screws - Number of hydraulic hold-downs: 14 pcs - Motorized backgauge with positioning system: 10 – 1000 mm - Strokes per minute (depending on cutting angle and length): 23 strokes/min - Hydraulic drive: 400 V / 7.5 kW Gijdpfx Adjhhc Ixetsl - Table height: 1030 mm - Space requirements (approx.): W 2500 x H 1630 x D 2150 mm - Weight (approx.): 3600 kg Equipped with: - Pneumatically assisted sheet lifting device - Front squaring arm and support arms - Electronic cutting depth adjustment - Cutting line illumination - Electric foot switch