Stanzmaschine / Punching machine

Krause FY 43 UB

Kondisi: baik (bekas),

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Printing technology: Piezo DOD printheads: Xaar 1001; Resolution: 720x360 dpi; Drying: 1x UV GOZ and 1x UV FOZ Höhnle with 7.2 kW, Pinning system (LED) after printing unit 1+5; Extraction: in drying unit for cooling the UV lamps and to minimize odors and improve sensor performance; Inert gas system: oxygen-reduced curing unit (Inert Gas System), Consumption: under 6m³/h; Printing method: roll-to-roll; Web width: 350 mm; Print width: 330 mm; Repeat length: min./max. of printable section length 10–1000 mm; Printing tolerance: single repeat +/-0.2 mm, cumulative repeat: +/-1.5 mm (per meter); Register accuracy: +/-50 μm; Max. speed: 48 m/min with 4 colors, depending on ink coverage, white with 30 m/min; Speed must be preselected from 18 to 48 m/min; Print pretreatment: Corona with 1500 VA; Web cleaning: Polymer rollers LC 350; Expanding shafts: for sleeves with 76 mm core diameter for both unwinding and rewinding; Expanding shaft clamping: pneumatic, releasable to allow rotation of the winding mandrel; Max. roll diameter for unwind/rewind: 610 mm; Max. roll weight for unwind/rewind: 120 kg. Power consumption: approx. 39 kVA / 60 A; Air consumption: 100 NL/min; Cooling capacity: approx. 60,000 BTU/h = 18 kW; Data interface: USB 2.0, Ethernet; Data format: PDF-X1 or X3 or EPS or AI; Length: 4550 mm; Width: 1750 mm; Height: 2200 mm; Weight: approx. 3 t. Comes with documentation, chiller, and inks. The machine is fault-free, complete and ready for operation, and has been regularly maintained. On-site inspection is possible. Kdodpfexz Ewnsx Aafol

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas),

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001,

Kondisi: sangat baik (bekas), Kolbus casing-in line with joint forming by Smyth, fully overhauled by GM Gross. Currently operational in production. Format / Size: 100x125 mm – 260x350 mm Kedewm E Rnjpfx Aafodl Book block thickness: 4–60 mm Capacity: 500–800 blocks per hour

Kondisi: sangat baik (bekas), Voltage: 220-240VAC // Current: 1.8A // Frequency: 50/60 Hz // Phases: 1 // Power: 0.4 kW WITH CONVEYOR BELT Diverting Belts: For envelope format 10.5cm x 14.8cm and in portrait orientation, the diverting belts should be adjusted toward the central transport belt. Kdjdpfoh Eibajx Aafel Rule: For large envelopes, move the diverting belts outward; for small envelopes, push the diverting belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ-FEEDER requires no synchronization. Guide the feeder by the handles into the printing machine and set the required height using the hand crank. Important: Only after setting the print height, secure the rear rollers and check for stability. Switch on the machine and start printing. For single-sheet feeder printing presses (GTO), adjustable tilt is available. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum print speeds. Compatible with all 36 x 52 printing presses, regardless of feeding system (stream/overlapping or single-sheet feed). – No mechanical modifications to the press are necessary. – No synchronization settings required due to laser technology. – The ultra-short setup time enables cost-effective operation from as few as 1,000 envelopes. – User-friendly handling. – The design of the feeder enforces overlap, so the throughput of the Stenz Feeder is not restricted. – Minimal wear parts for an extremely long service life. – Already certified for use on thousands of different printing presses. – A Swiss quality product – Designed by printers for printers. Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 5722, Table clamping surface: 190 x 710 mm Table travel X-axis: 390/360 mm Table travel Y-axis: 150 mm Table travel Z-axis: 280 mm Spindle taper: SK 40 Spindle speeds: 100 – 3100 rpm Longitudinal feed: 0 – 600 mm/min Electrical connection: 380 V, approx. 1.5 kW Required space: 1400 x 1200 x 1500 mm Weight: approx. 680 kg Kdsdpfx Aaoflrg Tsfjl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, with left and right flap, dimensions: approx. 1,660 x 1,250 mm Kdsdpfx Aasg Du H Hjfel

Kondisi: baru, Tahun pembuatan: 2025, HIDROLIK PRES VE BİRLEŞTİRME MAKİNESİ MODEL: MAGRAF PK-50x40 PLUS YIL: 2025 Hidrolik basınç: 4000 kg Kodsgnlvnopfx Aafodl

Tahun pembuatan: 1998, Kondisi: hampir baru (bekas), Rondstapel-aanvoer, eerste vouwunit TD78/4-1 met 4 zakken, tweede unit TD66/4-2 met 4 zakken, derde unit met mes Stahl EF63 (1984), SBP 80 persafvoer, geen pomp - de machine werkte op de interne persluchtvoorziening. Kdedpfx Aaed Tnxlsfsl