Penawaran Palet Euro Container Bekas, P: 400, L: 300, T: 120 (mm). 9 ltr, P: 400, L:

Kruizinga 98-497GB-PAL

Kondisi: baru, Tahun pembuatan: 2026, Universal Application (wood, pallets including nails and staples, wood fiberboards and offcuts, veneers, MDF panels, plastics, etc.) ✔ Motor Power: 30 kW ✔ Rotor Length: 870 mm ✔ Rotor Diameter: 270 mm ✔ Rotor Speed: 80–120 rpm ✔ Number of Cutting Blades: 38 Iedpfx Ajiq U Ayjfioar ✔ Granulation: 10–50 mm ✔ Capacity: up to 8 m³/h* ✔ Feed Opening: 2031 x 1565 mm ✔ Dimensions (L/W/H): 3.21 / 1.97 / 2.04 m ✔ Weight: 2450 kg 2 years warranty or 2,000 operating hours

Kondisi: baru, Tahun pembuatan: 2026, Usable space: LxWxH 4300x1700x2200mm max. 220°C, Heating options: oil, gas, or electric, Iaodpfxoizw E Ue Afisr Floor tracks for rack trolleys or manual/automatic conveying rails possible, Hinged or sliding doors available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 9.000 h, Fungsionalitas: berfungsi sepenuhnya, TECHNICAL DETAILS Control: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 – 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub Spindle Machining diameter: 20 mm Spindle speed: 200 – 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 – 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tool System Turning tools (12x12x130): 5 Toolholder/cut-off tool (16x12x130): 1 Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Toolholders, quill (diameter): 19.05 mm Toolholders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Collet main/sub spindle: F25 (145E) Guide bush (Neukomm): T223 (22.001) Iedpsxf Hqqjfx Afijar Rapid Traverse All axes: 32 m/min Machine Specifications Machine footprint (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle center height: 1,050 mm Machine weight: 2,150 kg Connected load: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section) - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub spindle - Main spindle with C-axis - Sub spindle with C-axis - 3x driven tools for rear machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - Bar feeder: FMB Turbo 3-26 - Option for long parts - Spindle flushing (Scherzinger pump)

Kondisi: baru, 7 new heating coils for a Fulmina SOU 20E melting furnace Technical specifications: - Coiled element with connection ends Ø 10 x 270 mm - Power rating: 10,000 Watts - Voltage: 220 Volts - Cold resistance: 4.60 (± 5%) Ohms - Wire diameter: 4.50 mm - Inner coil diameter: 29 mm - Leg length: 240 mm - Number of legs: 3 x 8 pieces - Wire quality: CrFeAl Y 3 heating coils constitute a complete set for this model. (The images of the melting furnace are for illustrative purposes, showing the model in which the heating coils were installed. The coils also fit other models with lower or higher power ratings—the only difference is the required quantity.) Immediately available from stock. Iajdpjd Tx A Esfx Afijr

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Usable capacity: 7.7 m³, max. temperature: 250°C, heating capacity: 54 kW, volumetric flow rate: 15 m³/min. Iaodpfx Afjilhucsior

Kondisi: bekas, es_en_001 Iaedsxgnpkopfx Afisr

Tahun pembuatan: 2007, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Painting Drying Chamber MEYER AB / Fanmet OY 17m³ Year of manufacture: 2007 (installed in 2009) Manufacturer: MEYER OY, Finland Previously used for drying painted furniture parts. Isdpett Sy Rjfx Afiear Loading via rack trolleys Dimensions: Length: 3600 mm Width: 2150 mm Height: 2200 mm Approx. 17 m³ Electric heating Total power: 30 kW 18 heating elements each 1,667 W, 400 V (length: 2360 mm) Airflow: 3 m³/sec or 10,000 m³/h Internal cladding: galvanized steel sheet 2 VEM fan motors (3.6 kW + 0.37 kW), ATEX compliant Thermostat: 0–120°C Overheating protection: 0–210°C ATEX compliant according to 94/9/EC CE marked

Kondisi: bekas, Single-column Hydraulic Press HYDRAP Type HPSK 25 Serial No. 6312 Year of manufacture: 1989 Pressing force: 25 tons Ram stroke: 500 mm Throat depth: 300 mm Installation height: 700 mm Table size: 1000 x 500 mm Table bore: Ø 210 mm Ram area: 400 x 360 mm Clamping bore: Ø 40 mm Table height above floor: 855 mm Rapid advance speed: 280 mm/sec Iedpfxohrakvo Afijar Pressing speed: 3.5 mm/sec up to 25 mm/sec Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operation and programming via SIEMENS S5 with OP1 controller - Measurement system for stroke adjustment - Pressing speed steplessly adjustable via potentiometer - Pressure steplessly adjustable via manual pressure regulator - Short-stroke device - Mechanical tool clamping on ram with T-slots and clamping pin bore - Control cabinet with electrical control mounted on the machine - Two-hand operation and electrical connection for foot switch - Control unit prepared for electrical tool monitoring - Hydraulic and electrical schematics available Space requirement (L x W x H): 1800 x 1200 x 2930 mm Weight: approx. 4 tons Good condition

Kondisi: bekas, Tahun pembuatan: 2013, 1. Clamping force: 60 tons (600 kN) 2. Injection unit orientation: Vertical 3. Rotary table: Included 4. Screw diameter: Approx. 35 mm 5. Shot size: Approx. 4.4 oz (125 g) 6. Injection pressure: Up to 210 bar Iaodpjwp E Hzofx Afijr 7. Injection speed: Approx. 139 mm/s 8. Mold opening stroke: 305 mm 9. Ejector stroke: 106 mm

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0369, gaya penekanan: 220 t, Straightening Press – Manufacturer Calende – 220 t Double-Column Press – Table 2,000 × 600 mm For sale is a high-performance straightening press from Calende in a double-column design, offering a press force of 220 t. This machine features a large working width of 1,500 mm, robust construction, and modern control technology, making it ideal for straightening, bending, and forming operations in industrial manufacturing. ==== Technical Data & Information: Straightening Press Calende – 220 t Double-Column Press ==== General Information - Manufacturer: Calende - Model: Straightening Press - Design: Double-Column Press - Press Force: 220 t - Machine Weight: approx. 5.2 t Iaedpofxyivofx Afior - Dimensions (L × W × H): approx. 4,000 × 1,950 × 2,900 mm ==== Working Area - Clearance Width: 1,500 mm - Stroke: 400 mm - Max. Working Height: 500 mm - Table Height: approx. 900 mm ==== Table and Slide - Table Size: 2,000 × 600 mm - Slide Plate: 2,000 × 400 mm ==== Forces - Return Force: 20 t ==== Speeds - Approach Speed: up to 10 mm/s - Working Speed: 10 mm/s - Return Speed: 25 mm/s - Rapid Traverse: 10 mm/s ==== Hydraulics - Total Power Requirement: 30 kW - Oil Tank Capacity: 500 l - Electric Oil Cooling: max. 1.5 kW ==== Control and Measurement Technology - Position Measurement System: Turck or Balluff - Control: Siemens S7-1500 or Pilz PSS 4000 - Monitor: Siemens or Omron ===== Straightening, Bending, Forming Technology, Metalworking, Maintenance, Series Production, Component Correction Straightening press, double-column press, hydraulic press, bending press, forming press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds upon these standards. Our core strength lies in special-purpose machine construction and press automation. We supply custom-made hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.