Robot industri

KUKA KR 30-3 + (V)KRC2 ed05

Kondisi: bekas, Tahun pembuatan: 2014, Robot industri Produsen: Kuka Tipe: KR210 R3100 ultra dengan sumbu linier 4,5m Tahun pembuatan: 2014 Jangkauan: 3.196 mm Berat: 1.154 kg Beban angkat: 210 kg Kontrol Kuka KRC4 Tahun pembuatan: 2014 Berat: 163 kg Perangkat lunak KSS 8.5.4 Kuka TouchPad KCP4 Kabel koneksi Kuka Sumbu linier Kuka Tipe: KL1500-3 T Tahun pembuatan: 2013 Panjang sekitar 4,5 m Hfsdjxuwlwepfx Aanog Jalur gerak sekitar 3,5 m Kabel carrier KRC4 Berat: 2.200 kg æ11526

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SMILE420X-03746, Perlengkapan: Pelat tipe tersedia, Zoller smile 420 / pilot 4.0 Software: Pilot 4.0 Tool adaptation: HSK-63 For further details, please refer to the brochure Pick-up only Hodpfx Aov Sz H Dsanofg

Kondisi: baik (bekas), Tahun pembuatan: 2015, en-GB Hfedpfx Ajy Hrpdsanog

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, We offer you the following: Manufacturer: DMG MORI Model: DMU 50 3rd Generation Year of manufacture: 2019 Control unit: Heidenhain TNC 640 Technical specifications: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range: 0 – 20,000 rpm Main spindle drive power (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Hfjdpsy Rx Stsfx Aanjg Working table: Swiveling rotary table, simultaneous operation possible: Ø 650 x 500 mm Tool changer: Tool holder: CAT 40 (conversion to SK 40 possible) Number of tool pockets: 60 positions Operating hours: approx. 13,500 h Spindle hours: approx. 5,300 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in X, Y, Z, B, C - Scraper belt chip conveyor - Internal coolant supply (IKZ) 40/80 bar, comprising: - Paper band filter - 980 l tank - Cabin roof - Rotary union in the spindle - Air blast through the center of the spindle - Dual switch filter - Rotating viewing window - Rinsing gun for chip flushing - Oil and emulsion mist separator - Infrared probe, Renishaw PP 60 optical (OMP 60) – Tool breakage detection IRS2 - Prepared for use with 3D quickSET - MPC (Machine Protection Control) - Operating mode 4 - Coolant temperature control for IKZ system Accessories, pictured tools, and clamping devices are included in the scope of delivery only if stated in the additional information. Specifications and details are subject to change and errors. Sale subject to prior sale.

Kondisi: bekas, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Production Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of manufacture: 2016, Commissioned: 2017 Equipped with CNC path control SIEMENS 840D SL (Solution Line) with 5 simultaneously controlled axes Traverse paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as a swiveling bridge +/– 135° (270°) B-axis 360° infinite Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7,500 N Feed force Z-axis 10,000 N Positioning tolerance (X/Y/Z) 0.008 mm Hfjdpet Ac Efofx Aanog Swivel speed A-axis 180° rotation in 4 sec. Interference circle diameter in the swiveling bridge max. 1400 mm Transport load in the swiveling bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle output 37 kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent pockets occupied Ø 140 mm Tool diameter with adjacent pockets empty Ø 250 mm Tool length max. 400 mm Tool weight max. 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Pneumatic connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37 kW/40% duty cycle) with liquid cooling and recooling device - 2-axis rotary tilting table LICON as B and C axis, with hydraulic axis clamping - Zero-point clamping system on the rotary axis’s table - Double pallet changer, without pallets (new pallets must be procured) - Media transfer with 5 single-acting pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, as disc turret - Machine designed for dry machining with MMS minimum quantity lubrication system - MMS-IKZ, internal MMS lubricant supply through the spindle - Scraper-belt chip conveyor, ejection height 1,150 mm - Licon ECO-Mode (energy-efficient operation of aggregates) - Direct position measuring system in all axes - Logged operating hours with control voltage on = approx. 7,500 h Space requirement for operation L x W x H 9,000 x 5,000 x 3,800 mm Space requirement for transport L x W x H 6,100 x 4,400 x 3,600 mm Basic machine weight approx. 21 t Total weight: approx. 24 t Very good condition

Kondisi: bekas, Tahun pembuatan: 2005, de-to-hu-it-lt-lv-nb-nl-pl Hfsdoyxh Sfspfx Aansg

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.150 mm, jarak lintasan sumbu Y: 1.850 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 24 m/menit, kecepatan spindel (maks.): 24.000 rpm, torsi: 87 Nm, CNC Fidia C20 WORKING ENVELOPE X-axis travel (longitudinal): 3,150 mm Y-axis travel (transversal): 1,850 mm Z-axis travel (vertical): 1,000 mm MAXIMUM AXIS SPEEDS X, Y axis feed rate: 30 m/min Z axis feed rate: 24 m/min WORKTABLE Clamping surface: 3,000 x 1,600 mm Maximum load capacity: 5,000 kg/m² T-slots: - 8 longitudinal H12 + 1 H8 - Width: 22 mm - Pitch: 160 mm ELECTROSPINDLE Maximum power (S6 60%): 55 kW Spindle speed range: 240 – 24,000 rpm Constant power range: 6,000 – 24,000 rpm Maximum torque: 87.5 Nm Tool holder: HSK-A63 C-axis travel: ± 200° Hsdpfxoyw Tdde Aanofg C-axis speed: 2,000°/min C-axis offset relative to spindle axis: 75 mm A-axis travel: +95° / -110° A-axis speed: 2,000°/min Max. distance spindle nose - table surface: 1,175 mm Machine is equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various machine accessories • User and maintenance manual and CE conformity declaration

Kondisi: baik (bekas), Tahun pembuatan: 2008, ref-10626 Hfedpfxoy H Er Es Aanog

Kondisi: baik (bekas), Tahun pembuatan: 2011, 10615 Hfodpfx Aey H Epweansg

Kondisi: bekas, Tahun pembuatan: 2018, Delivery time approx. 5 months. Machine from a training facility – EXCELLENT condition, low operating hours (edge banding unit unused). Without tooling. Additional costs for dismantling / delivery / installation and commissioning / training. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding – Made for You This CNC machining center is equipped with a rich selection of edge banding tools to meet all woodworking requirements. MAIN ADVANTAGES - Powerful, with advanced H80C edge-banding unit, drilling spindles with 8,000 rpm, and market-leading spindle technology, offering over 1,000 hours of maintenance-free operation - Superior and generously equipped; suction cups can be positioned and configured using the FLEX worktable to optimally suit requirements - Easier and more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies "MAESTRO EDGE" - Simple operation: lowered frame for full accessibility to the worktable, integrated control cabinet and vacuum pump, and no safeguarding elements required in the PRO SPACE configuration Base Structure: Hfedpfx Aasyuw Srsnsg The base structure is a monolithic construction made from thick-walled steel, reinforced with welded box plates along the entire machine bed, delivering extreme rigidity. The bed design, with a broad base, is key to ensuring long-term precision and stability. The supporting frame features an exceptionally robust, monolithic steel base with heavy ribbing for outstanding stiffness. The exceptionally wide footprint was specially designed to provide stability to the machine, ensuring ongoing precision regardless of working conditions – the machine does not need to be anchored to the floor. The base forms a large and solid mounting surface for the mobile gantry: the machining unit is therefore provided with a balanced, stable, and resilient support, capable of withstanding high loads for superior performance and greater accuracy. The mobile gantry consists of a solid single-piece attached to the base, gliding on prism guides with recirculating ball-bearing carriages of the highest quality. The machining unit is mounted on it and travels along the Y and Z axes on prismatic guides with ball carriages. Movement of the lower mobile unit (X-axis) and the working unit along the bar of the mobile unit (Y-axis) is achieved via helical rack and pinion drive, providing increased tooth engagement for higher acceleration and greater axis speed (X and Y). The specially designed helical gearing ensures reduced wear of mechanical components and lower noise levels. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and supporting strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for absolute machining quality.