Lini pengumpan sabuk

LARA DEMAE-10000/100/1400-D

Kondisi: baik (bekas), Tahun pembuatan: 1998, Press force: 315.00 t Stroke: 500 mm Throat depth: 425 mm Daylight (Table - Ram, Stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Return speed: 330 mm/s Working speed: 19 mm/s Oil capacity: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (WxDxH): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE regulations Nsdsv Rwu Uopfx Afvoda Oil-hydraulic drive, pressure/time and stroke-dependent control, front light barrier (Sick), two-hand operation

Kondisi: bekas, Decoiler and Straightening Line – Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness (with straightening machine inactive): 6 mm Sheet thickness (with straightening machine active): 2 mm - Very well equipped with excellent feeding aids Total system footprint (L x W): approx. 7,000 x 3,000 mm Total system weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs. Straightening roller diameter: Ø 40 mm Number of pull rollers: 2 pcs. Pull roller diameter: Ø 80 mm Entry/throughfeed height: 1,500 mm - Straightening rollers hardened, ground and hard-chromed, with central support - Pull rollers hardened, ground and hard-chromed, with hydraulic disengagement - Manual adjustment of straightening rollers - Infeed assistance with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable lateral strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pull rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or for processing thicker material, stroke via trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Own weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8,000 kg Coil outer diameter: max. 1,600 mm (with loading saddle) Coil outer diameter: max. 2,000 mm (without loading saddle) Coil turntable diameter: Ø 1,700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of decoiler crown above baseplate: 1,500 mm - Decoiler crown drive via hydraulic motor and gear - Pneumatic overrun brake on decoiler crown TWINFLEX - Hydraulic expansion of decoiler crown, central via wedge slide system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading saddle with 12 t lifting capacity and 300 mm stroke - Decoiler in floor-running frame with motorized cross-travel drive Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Own weight: approx. 5 tons Central Hydraulic Power Unit, free-standing Nedeif Sg Sepfx Afveda Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Own weight: approx. 800 kg Electrical Cabinet, free-standing - All cable connections via Harting plug connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Own weight: approx. 800 kg

Kondisi: baik (bekas), Maximum width: 1300 mm Number of rollers: 5 Ndjdpfx Afjflvf Ajvea With shear

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jumlah rol pelurus: 7, diameter luar koil: 1.400 mm, diameter dalam kumparan: 508 mm, diameter rol: 80 mm, jumlah rol pemakan: 2, diameter rol pengumpan: 80 mm, diameter rol pelurus: 80 mm, lebar gulungan: 400 mm, kapasitas angkut: 3.000 kg, 1 Ndjdpfx Aotgvgpofvoa

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, dokumentasi / manual, Kapasitas: 4050 mm x 175 Ton Jarak antar rangka: 3600 mm Langkah: 265 mm Kontrol: DURMA DT15 (Layar Sentuh 3D) Nomor Seri: 73362219436 Nsdpfoyrdgqex Afvoda Dimensi: 5200 x 1900 mm Tinggi: 2930 mm Berat: 12.750 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, EUROMAC MULTI 220/6R Corner Notcher Maximum cutting length: 220 mm Maximum sheet thickness: 6 mm Variable cutting angle: 30° - 120° WITH PUNCHING UNIT 2-station EUROMAC notching and bending machine, model Multi 220/6R Press brake, press brake, cutting machine Cutting capacity for steel: 6 mm at 45 kg/mm² 4 mm for stainless steel Ndjdewqdfxepfx Afvea Station I (Notching) Notching angle: 60° to 140° (with special blades 30° to 140°) Blade length: 220 mm Table dimensions: 950 x 640 mm - Manual angle adjustment via handwheels - Notching angle with integrated blade set: 60° to 140° - Hydraulic clamping of upper and lower blades - Automatic blade gap adjustment - Sheet hold-down device - Built-in graduated scales on the table - Adjustable angle stops - Operated by foot switch Station II (Press Brake Unit) Pressing force: 18 tons Table dimensions: 950 x 340 mm Working height: 1100 mm - Infinitely variable lifting speed - Continuously adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible 4-sided die block (V-openings: 90°), length = 415 mm - Upper tool 90°, length = 415 mm Motor power: 4 kW Power supply: 400 V, 50 Hz Overall dimensions: 115 x 100 x 125 cm Weight: 900 kg

Kondisi: bekas, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right & left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center partition): approx. 2000 x 950 mm - Table size of fixture-changing plate for welding jig setup: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Freestanding control cabinet with teach-in operating panel (weight approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control: YZNC-OP186 - Teach panel: JZNC-T834B - Robot: YRFL-NNA06WB - Automation unit by ECKHARDT type ROBO Robot payload: 6 kg Net weight (robot only): 180 kg The entire system is configured as a compact welding cell. Robot control cabinet positioned adjacently. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirement for welding cell with robot (L x W x H): 2000 x 2000 x 2300 mm Nodpfx Afowypqlevoda Weight of welding cell with robot: 1055 kg Space requirement for control and control cabinet (L x W x H): 1000 x 850 x 1600 mm Weight of control and control cabinet: 300 kg Overall space requirement of the system (L x W): approx. 3000 x 3000 mm Net weight of the complete system: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Kondisi: baik (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: 91426, 25227 Technical Specifications: Nedpswvih Nsfx Afvoda - Pressing force: 150 t - Working width: 3600 mm - Clearance between columns: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustment range for fixed stops: 120 mm - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 3850 x H 2300 x D 1600 mm - Weight: approx. 8,700 kg Equipped with: - Swivel arm – operator panel with ATL 550 control - For pressing depth + rear gauge - Motorized back gauge - Crowning system - FIESSLER Lasersafe - 4-way universal die, segmented gooseneck punch + hemming tool - Two-hand control panel, foot switch,

Kondisi: bekas, Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, Kohler Straightening Machine 30-400 - Year of manufacture 1980 Number of straightening rollers: 9 pieces Max. strip width: 400 mm Ndedpfx Afjv Hrltovoa GSW Decoiler AHM 1500 - Year of manufacture 1999 Both units mounted together on one base frame Further data and photos available on request

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Pressing force 135 t Bending length 3050 mm Frame gap 2550 mm Installation height 320 - 560 mm Stroke 240 mm Working speed 10.0 mm/sec Return speed 150 mm/sec Throat depth 400 mm Working height 1050 mm Control DNC 1200 PS/B Max. operating pressure 297 bar Compressed air 4.5 - 6.0 bar Power supply 15.0 kW Oil capacity 250 ltr. Ndjdox Ik D Aspfx Afvja Weight 11500 kg Dimensions (L x W x H) 5240 x 2400 x 2900 mm Good / well-maintained condition (!!) Machine was used for aluminium processing - In tested condition - Machine video - ?v=z-Bxibk_8uE Equipment: - CNC electro-hydraulic press brake - CYBELEC CNC controller, Model DNC 1200 PS/B * Serial no.: 0080 * Swiveling control panel, front right * Numeric programming * Tool & program library - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electro-mechanical backgauge (X axis) * With 3 manually adjustable backgauge fingers (Z axis) * Max. traverse speed 250 mm/sec - CNC electro-mechanical height adjustment of the backgauge (R axis) * Max. traverse speed 100 mm/sec - CNC lower-bed crowning - CNC pneumatic die shift (I axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard including swiveling door - 2x side safety guards - Including LAZER SAFE safety device (front) - 2x robust front support arms with sliding system - Original EHT split upper and lower tools - 1x moveable two-hand/foot control - Electrical diagram + hydraulic diagram