Mikroskop/alat ukur kekerasan

Leica Miniload II

Tahun pembuatan: 2002, Kondisi: belum diuji (bekas), Robot No control panel + connection cables Used, untested robot. No tech pendant. Not tested. Lsdogu U Itspfx Ahroru

Kondisi: bekas, Detail Teknis: Diameter pemesinan di atas dudukan: 1200 mm Diameter pemesinan di atas penyangga: 800 mm Panjang pemesinan: 3200 mm Panjang bagian yang menjorok: 600 mm Tinggi antara titik di dudukan: 600 mm Diameter pemesinan pada bagian yang menjorok: 600 mm Kecepatan putar spindel – variabel: 4,6-545 / 22 langkah putaran per menit Ljdpfx Aszuyfajhrsru Diameter lubang spindel: 90 mm Laju umpan: 1,4-510 m/menit Kerucut penjepit: MK6 Total kebutuhan daya: 15 kW Berat mesin kira-kira: 10,0 ton Dimensi P x L x T: 6,20x2,00x1,80 m Dimensi lemari kontrol P x L x T: 0,55x0,33x1,0 m Perlengkapan: Sistem pengukuran digital (dimodernisasi) Pelat putar Ø 1000 mm (4 rahang) Penyangga pahat empat arah Penyangga luar tertutup, diameter dalam 250 mm Titik senter yang berputar Perangkat pemesinan kerucut *

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Data Umum Berat mesin: 1.720 kg Tinggi: 2.300 mm Lsdex D Dizepfx Ahroru Dimensi Panjang mesin: 3.990 mm Penggerak Utama Jumlah sumbu: 6 Robot las 6-sumbu REHM COMPACT-ARC 200 VM ini diproduksi tahun 2015. Dilengkapi dengan sel robot pengelasan yang kokoh, beroperasi pada 3 × 400 V AC dengan frekuensi 50 Hz. Dapat menangani beban benda kerja maksimal 200 kg dan membutuhkan tekanan angin 6 bar. Dimensi alat adalah 3.990 × 2.020 × 2.300 mm, bobot 1.720 kg. Pertimbangkan peluang untuk membeli robot las REHM COMPACT-ARC 200 VM ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pengelasan

Kondisi: baik (bekas), Arbeitsbereich_SpH400mm_SpW5000mm Lsdpfx Ahjy Ug U Djrjru

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 240 mm, jarak gerak sumbu Z: 340 mm, For sale: 5-axis machining center by Deckel Maho, model DMU 35 M, equipped with 2 manual rotary axes. This machine is in very good, fully operational condition and stands out for its particularly compact design, making it extremely space-saving. Technical Data: Year of manufacture: 1999 Control: Siemens 840D ShopMill X-axis travel: 350 mm Y-axis travel: 240 mm Z-axis travel: 340 mm Feed rate: Stepless up to 5,000 mm/min Rapid traverse: 5 m/min Servo motors for X, Y & Z axes Clamping area: Ø 400 x 280 mm Rotary range: 360° (mechanical) Table clamping: +105/-150 (mechanical) Max. table load: 100 kg Tool changer: Manual change Tool holder: SK 40 Tool clamp: pneumatic/mechanical Required footprint: 3,800 x 3,600 x 2,100 mm Shipping dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Additional features: Electronic handwheel, chip tray included. Please note: Tool holders & vises are not included in the offer; these can be provided separately upon request. Transport and loading can be organized Europe-wide at extra cost upon request. All prices are exclusive of VAT. Inspection is possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine buying & selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell your equipment? Lrodpfx Aswal Aqohrju For more information or contact options, visit our website.

Kondisi: bekas, TECHNICAL DATA - Objectives: 1.5X and 0.5X Lrsdpfsug U Rgex Ahrou - Illumination: OLYMPUS HIGHLIGHT 3001

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Max. swing diameter: 300 mm, swing diameter over cross slide: 190 mm, travel X/Z: 175 mm/300 mm, turning length: 250 mm. Spindle flange diameter: 120 mm, spindle diameter at front bearing: 80 mm, bar capacity: 42 mm. Spindle speed: 6,000 rpm, feed force X/Z: 3.6 kN, rapid traverse X/Z: 24 m/min. Tool stations: 12, shank diameter: 30 mm, turning tool shank height: 20 mm. Quill diameter: 70 mm, automatic quill stroke: 90 mm, max. quill force: 8.8 kN. Dimensions X/Y/Z: approx. 2300 mm/2400 mm/1800 mm, weight: approx. 3,500 kg, control: Siemens Sinumerik. Including Breuning IRCO PROFImat bar feeder. Documentation available. Lrsdpfxotxquhe Ahrju

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Deskripsi (kelengkapan rinci): o Platform 5 sumbu o Antarmuka pengguna modern yang dapat diperluas dengan integrasi EDX dan penyusun gambar o Detektor SE o Detektor BSE berbasis sintilator o Detektor dalam lensa o Sistem vakum rendah dengan detektor BSE o Sistem JEOL-EDX yang terintegrasi sepenuhnya dengan perangkat lunak o Pengukuran arus dalam kolom Lrodpfx Ahezn Ihpjrju o Kamera navigasi o Kamera langsung o Konsol operator o Meja kerja, PC dengan sistem operasi Windows, 2 x monitor 24 inci, keyboard

Kondisi: baik (bekas), Distance between centers: 1000 mm Center height: 230 mm Main motor power: 9.2 kW Grinding wheel dimensions (od x id x width): 500x80x203.2 mm Max. workpiece diameter: 460 mm Tailstock taper: MORSE 4 Lrsdpstrgnzsfx Ahrou Workhead spindle taper: MORSE 5 Max. Z axis travel: 1115 mm Max. X axis travel: 260 mm Approx. dimensions (length x width): 440x370 cm Approx. weight: 4700 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of Manufacture: approx. 1960 Type: Horizontal Broaching Machine Model: RH 10-50 Loder A Hdgepfx Ahreru Machine No.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with manual, heavy-duty tool feeder Broaching stroke: 1,500 mm Pulling force: 10,000 kg (100 kN) Mount in pull bridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Workpiece diameter: max. approx. 750 mm (limited by the tool tray of the feeder) Cutting speed: Hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: Hydraulically infinitely variable from 5 m/min to 30 m/min Machine footprint (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Equipment: • Mechanical-hydraulic control for broaching and return stroke • Integrated coolant and cutting fluid system • Manually operated tool feed • Broaching slide with pull head mount is guided flat on both sides • Adjustable pull force limitation Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width • Adapter sleeve for pull bridge from Ø 85 mm to Ø 63 mm Remarks: The machine is suitable for the production of keyways with flat broaching tools, as well as for profile broaching. Thanks to the machine bed and robust tool feeder, the machine is well suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is located in our warehouse and can be inspected under power. Currently, the machine has not been technically or visually refurbished, but is ready for immediate use. Pull heads for profile broaching are mostly available upon request, depending on DIN standard, dimension, and stock. Direct contact details for us as well as further information can be found in the attached PDF document.