Forklift diesel
Linde H 80D-03/1100

Name: Linde H 80D-03/1100
Brand: Linde
Availability: InStock

Tahun pembuatan

2022

Kondisi

Bekas

Lokasi

Crailsheim Jerman

Tampilkan peta

Data mesin

Nama mesin:: Forklift diesel

Pabrikan:: Linde

Model:: H 80D-03/1100

Tahun pembuatan:: 2022

Kondisi:: bekas

Harga & Lokasi

Lokasi:: Crailsheim

penyewaan:: dimungkinkan

Hubungi

Rincian teknis

Kapasitas angkut:: 8.000 kg

Tinggi angkat:: 4.070 mm

Panjang total:: 6.410 mm

Rincian penawaran

ID iklan:: A20815877

Nomor referensi:: g06561

Pembaruan:: terakhir pada 22.12.2025

Deskripsi

· Dual-pedal control for forward and reverse driving
· Hydrostatic braking
· Joysticks integrated into armrest
· Glare-free display with indicators for, among others, fuel level, time, operating hours, and service information.
· Variable displacement pump for reduced energy consumption
· Linde Engine Protection System (LEPS): monitoring
· Warning and power reduction when exceeding or falling below various performance parameters such as engine oil level/pressure, coolant level/temperature, hydraulic oil temperature, air filter vacuum
· High safety and stability ensured by Linde torsion support
Lodpsx Nkagjfx Aahjta
· Hydraulically damped and suspended comfort seat with extensive adjustment options
· Air filter with integrated cyclone pre-separator
· New for Evo models: Automatic speed regulation in curves
· Drive dynamics adjustment including lift performance adaptation
· Up to 10% lower fuel consumption
· Precise Linde Load Control integrated into armrest
· Glare-free display with indicators for fuel level, time, operating hours, service information
· Control lights on display for engine oil pressure, overheating, parking brake; audible warning for engine and hydraulic oil temperature, air filter contamination, and low fuel reserve
· 12V socket in cabin
· Axle load with load front/rear kg 20580/2340
· Axle load without load front/rear kg 7540/7380
· Front track width 1752 mm
· Rear track width 1550 mm
· Tilt mast/fork carriage, forward/backward a/b (°) 5.0/9.0
· Seat height/standing height 1505 mm
· Coupling height 844 mm
· Travel speed loaded/unloaded km/h 23/23
· Lifting speed loaded/unloaded m/s 0.51/0.54
· Lowering speed loaded/unloaded m/s 0.56/0.48
· Tractive force loaded/unloaded 54000 / 50000 N
· Gradeability loaded/unloaded % 25/34
· Acceleration time loaded/unloaded s 6.7/5.9
· Service brake hydrostatic
· Rated speed rpm 2200
· Number of cylinders/displacement cm3 4/4038
· Type of drive control hydrostatic/infinite
· Working pressure for attachments bar 265
· Oil flow for attachments l/min 70
· Sound level at driver’s ear dB(A) 77

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2018

391 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 7951 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Forklift diesel Linde H80D-1100/396-03 EVO

Dortmund

11.215 km

Forklift diesel
LindeH80D-1100/396-03 EVO

€45.950

harga tetap ditambah PPN

Hubungi

Kondisi: bekas, nomor mesin/kendaraan: 26074, Tahun pembuatan: 2019, jam operasional: 13.719 h, kapasitas angkut: 8.000 kg, tinggi angkat: 5.250 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, tinggi konstruksi: 3.965 mm, Perlengkapan: geser samping, kabin, 26074 Device details: Year of manufacture: 2019 Load capacity: 8,000 kg Lifting height: 5,250 mm Indicated operating hours: 13,719 h Mast type: Standard Mast height: 3,965 mm Length/Width/Height: 4,139 / 2,500 / 2,770 mm Operating weight: 16,184 kg ---- Features: * Overhead guard * 3rd valve * 4th valve * Full cabin * Heater * Front working lights * Rear working lights Ljdpfx Ajwqda Aoahsta * Twin tires --- Attachments: * Sideshift * Clamping fork --- Additional device information: Warning beacon Radio --- The operating hours are generally the current meter reading. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments and sweepers available for immediate delivery. Also available for rent! We are happy to purchase your USED machine. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. In trade sales, the machine is sold as is, not refurbished. All information is without guarantee, subject to errors and changes.

Lihat detail

Iklan kecil

Székesfehérvár

10.498 km

Muratec MW 120
MuratecMuratec MW120 GT

€59.000

EXW VB ditambah PPN

Hubungi

Tahun pembuatan: 2012, Kondisi: baik (bekas), de-Muratec MW120 GT zu verkaufen Gebraucht, in ausgezeichnetem Zustand. Ltedpfx Aaoifi D Tshja Die Maschine kann nach Terminvereinbarung besichtigt werden. Der Transport liegt in der Verantwortung des Kunden, wir können jedoch bei Bedarf beim Verpacken und Verladen behilflich sein. Lieferung: EXW Székesfehérvár

Lihat detail

Iklan kecil

Strzałkowo

10.499 km

Forklift diesel
LindeH80D-03/1100

€112.000

VB ditambah PPN

Hubungi

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 4.719 h, kapasitas angkut: 8.000 kg, tinggi angkat: 3.950 mm, pengangkatan bebas: 1.255 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.712 mm, jenis penggerak: Diesel, Forklift diesel Ltodpfx Aajwfkfuohsa Kelas ISO: ISO kelas 4 = 5.000 - 10.000 kg Tipe tiang: Triplex Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: Sangat baik Kondisi ban depan: Baru Kondisi ban belakang: Baru Sideshift, perangkat pengatur garpu, katup ke-3, katup ke-4, pemanas, kabin penuh,

Lihat detail

Iklan kecil

Mesin Pengukur Koordinat Hexagon Global S Green 05.07.05

Britania Raya

11.831 km

Mesin Pengukur Koordinat
HexagonGlobal S Green 05.07.05

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 500 mm, rentang pengukuran sumbu Y: 700 mm, rentang pengukuran sumbu Z: 500 mm, masa garansi: 12 bulan, Perlengkapan: dokumentasi / manual, DELIVERY TO UK ONLY Global S Green 05.07.05 HH-AS6-T5, 5° Automatikscher Teilkopf HP-TM Messtaster Standard-Taster-Set Ltodpfxju Snthe Aahoa PC-DMIS Messsoftware Baujahr 2019 Bitte kontaktieren Sie uns für alternative Konfigurationen. Messbereich: X 500 mm, Y 700 mm, Z 500 mm MPE(E0/E150) (18 °C - 22 °C) 1,5 + L/333

Lihat detail

Iklan kecil

Mengukur lengan FARO Platinum P08 7 Achsen

Wolkersdorf im Weinviertel

10.632 km

Mengukur lengan
FAROPlatinum P08 7 Achsen

€14.500

FCA harga tetap ditambah PPN

Hubungi

Tahun pembuatan: 2009, Kondisi: diremaj di bengkel (bekas), nomor mesin/kendaraan: FARO-PT08, Well-maintained Faro Platinum measuring arm with 7 axes Measuring arm length: 8ft (approx. 2.4m) Lodpfjlwktpox Aahjta Accuracy: 30 / 43µm Last calibration: 2012 Includes new Aberlink 3D software (free updates) Windows 10 HP notebook (used) Optional: Inca Premium software (+ €4,000) or others (Polyworks, PcDmis, MCosmos, etc.) Measuring table 1500x1000 available on request Software training as needed

Lihat detail

Iklan kecil

Memutar mesin bubut otomatis HANWHA XD26H

Airdrie

11.786 km

Memutar mesin bubut otomatis
HANWHAXD26H

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 1.256 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HTS.XD.26.A1.0133, Dugard Hanwha Ltedpfewxl Rlex Aahsa Model: XD26H S.N A1.0133 Year of Manufacture: 2019 Description: - Fanuc i Series CNC control - Maximum turning diameter: 26 mm - Main and sub spindles: 8,000 RPM - Capacity for up to 20 tools - LNS Alpha 312 bar feeder

Lihat detail

Iklan kecil

Mesin penggiling silinder Karstens Generalüberholt K19 CNC 1000

Heroldstatt

11.131 km

Mesin penggiling silinder
Karstens GeneralüberholtK19 CNC 1000

Hubungi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Centre Height: 181 mm Centre Distance: 1000 mm Max. Grindable Workpiece Diameter: 360 mm Max. Load (Cantilevered): 1000 N (100 kg) Max. Load (Between Centres): 3000 N (300 kg) Z-Axis Table Swivel Adjustment: 10° Table Drive (hydraulic): 0–4 m/min X-Axis Travel of Infeed Spindle: 80 mm Rapid Traverse (hydraulic): 50 mm Coarse Adjustment (Air Cushion): 280 mm Feed Drive via DC Motor Ledpfxetqf Rze Aahota Rapid Feedrate: 48 mm/min/Ø Feed Cycle: Plunge / Longitudinal Grinding 4 Pre-selectable Feedrates mm/min/Ø: 0.01–48 4 Pre-selectable Feed Amounts mm: 0.001–0.1 Spark-out Cycle in Traverse Grinding s: 0–99 / 0–99 strokes Creep Feed (Jog Infeed) mm/Ø: 0.001 Grinding Spindle Head Universal, Swiveling: 0–180° Grinding Wheel (External): D x W x Bore: 500 x 100 x 127 or 203.2 mm Grinding Wheel (Face, Option): D: 250 x 32 x 76.2 mm Grinding Wheel (Internal, Option): D: (2–250) mm Drive Power (External/Face): 5.5 (7.5) kW Drive Power Internal: 2.2 kW Peripheral Speed (External): 35 (50) m/s Grinding Wheel Wear (External): 160 mm/Ø Guard Width: 100 mm Grinding Spindle Diameter: 60 mm Internal Spindle Mount: 80 (100) mm Workpiece Spindle Head: Infinitely Variable Drive: Mk 4, 1/min: 30–270 / 50–450 Workpiece Spindle: Lockable Spindle Taper: MK 4/24 mm Spindle Nose for Flange: MK 4 mm cylindrical Ø63H6 x 6 Workpiece Headstock Swivels on Turning Part: 0–90° Tailstock: Quill Taper/Quill Diameter: MK 4/750 mm Quill Stroke: 45 mm Quill Force: 100–800 N / 250–1400 N adjustable Quill Actuation: Manual (foot switch) Quill Fine Adjustment: ±40 µm Electrical Connections: Total Machine Connected Load: 6.5–10 kW Grinding Spindle Head: 5.5 (7.5) kW Workpiece Spindle Head: 0.55 (1.1) kW Coolant Filtration: 0.75–2.2 kW Guideway Lubrication Pump: 0.1 kW Hydraulic Pump: 1.5 kW Hydraulic Tank: 80 litres Pneumatics: 6 bar Comparable with Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat.

Lihat detail

Iklan kecil

Mesin bubut spindel ganda CNC Takisawa TT-500 GD

Jerman

11.023 km

Mesin bubut spindel ganda CNC
TakisawaTT-500 GD

Hubungi

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), A high-precision Takisawa CNC lathe with dual spindles is available. Spindle power: 2x 7.5 kW, speed: 5,000 rpm, spindle nose: F-80, tool holder: 2x 5 positions, max. turning diameter: 50 mm, max. turning length: 50 mm, max. workpiece weight: 2x 0.5 kg. Machine dimensions X/Y/Z: approx. 2,600 mm/2,550 mm/2,150 mm, weight: approx. 4,300 kg, control: 2x Fanuc Oi-TF, operating hours: 11,179 h. Includes rear chip conveyor, automatic central lubrication, full machine enclosure with coolant pump, portal loader type D, Raku Raku loader, reversing station, automatic loading/unloading doors per spindle, and discharge chute for inspection parts. Documentation available. On-site inspection possible. Ljdpfju Dm Izex Aaheta

Lihat detail

Iklan kecil

Mesin penggiling silinder GP-Rundschleiftechnik GmbH GP CNC 1000 SIEMENS

Berghülen

11.125 km

Mesin penggiling silinder
GP-Rundschleiftechnik GmbHGP CNC 1000 SIEMENS

Hubungi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, GP CNC-1000 cylindrical grinding machine Also available with grinding lengths of 650mm and 1500mm Manufacturer: Karstens Technical specifications: Centre distance: GP CNC 1000: 1000mm Centre height: 180 mm Optional center heights available Max. workpiece weight between centers: 300 kg Max. workpiece weight supported, including workholding devices: 100 kg Workhead: MT 4, other spindle tapers optional Grinding wheel diameter with electric or mechanical B-axis up to 500 mm; 600 mm diameter possible only with single grinding wheel configuration Wheel arrangement: left for straight plunge grinding, right for angular plunge grinding, 30 degrees Total connected load: approx. 30 kW Machine weight: approx. 4400 kg Standard machine equipment: Axes: X, Z, C axes Grinding spindle headstock: asynchronous motor 7.5 kW, higher motor power available as an option Constant grinding wheel peripheral speed up to 50 m/s, selectable cutting speed, automatic compensation after dressing Workhead: Siemens servo motor 2.2 kW, speed range: 0–560 rpm CNC control: Siemens 840Dsl Standard software modules included: 1) Outside plunge grinding 3) Outside longitudinal grinding 4) Internal longitudinal grinding 5) Outside face grinding Lodpfx Aott Rtzjaheta 6) Internal face grinding 7) Angular plunge grinding 8) Wheel changer for 8 wheels Additional optional modules: oscillation, chamfering, external and internal taper grinding Axis drives: Siemens servo Fully enclosed guard with large workpiece and maintenance doors Two-tone paint finish CE mark Comparable to Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Danobat

Lihat detail

Iklan kecil