Forklift

Linde H45D-04-600

Tahun pembuatan: 2008, Kondisi: bekas, Pressure 315 t Stroke 40-200 mm Strokes per Minute 20-100 spm Slide Adjustment 120 mm Slide Surface 2000x1100 mm Table Surface 2000x1200 mm Die Pass-Through in Table 1700x250 mm Installation Height Bottom, Slide Adjustment Top 500 mm Ltodpfordi Dlex Aahsa Side Frame Passage 820x650 mm Total Power Requirement 45 kW Machine Weight approx. 44 t Hydraulic Clutch-Brake Combination Hydraulic Overload Protection in Slide Semi-Automatic Stroke Adjustment Motorized Slide Adjustment Frequency-controlled Stroke Rate Central Flow Grease Lubrication for Guides Oil Circulation Lubrication Slide Balancing Cylinders Front/Rear Safety Doors Hydraulic Die Clamping System Extendable Table Plate Hydraulic Roll Block Rails in Table Helmerding EWH800/150 Servo Feeder (V-1341-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-6.0mm, Max. Cross Section: 1600mm² Intermittent Airing, Height Adjustment via Gear Motor Straightener R-70/800/9-S (R-1343-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-4.0mm, Max. Cross Section: 1600mm² at 450N/mm² Straightening Speed, frequency-controlled up to 25m/min Strip Infeed Aid: Transfer Table with hydraulically adjustable peeling wedge Hold-down hydraulically adjustable Strip Side Guide: 1 pair of lateral roller guides adjustable by handwheel Feed Rollers: 2x rollers Ø140mm, pneumatically adjustable Straightener: 9x rollers Ø70mm, manual adjustment by handwheel Uncoiler HE-4/800/MOT/HYD (H-1342-6518) Strip Width: 100-800mm Max. Load: 4t Coil Inner Diameter: Ø508mm Coil Outer Diameter: Ø1000-1600mm Drive, frequency-controlled Limiting Arms Hydraulic Expansion Hydraulic Pressure Arm

Tahun pembuatan: 2001, Kondisi: bekas, Max. pressure: 500 t, max. operating temperature: 370°C, oil-heated, oil-cooled, with secondary circuit for heat recovery, overhauled in 2014. Lsdpfxodwf Dbj Aahota

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Lsdpfx Aaevvkfdshjta Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: baru, Tahun pembuatan: 2023, I am selling an alligator shear, metal shear suitable for cables, pipes, and profiles. Ljdpfxjlhrb Ho Aahota Max. cutting force: 630 kN Cutting length: 600 mm Max. jaw opening: 280 mm Hydraulic pressure: 25 MPa Full cycles per minute: 7–8 ×/min Power consumption: 7.5 kW Weight: approx. 1,400 kg Dimensions (L×W×H): 1,600 × 700 × 1,300 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Pusat Pemesinan - Vertikal Produsen: Hyundai KIA Model: VX380TD Tahun Pembuatan: 2007 Ltedpfjiw Ekdjx Aahoa Unit Kontrol: Fanuc Seri 01-MC Kisaran kecepatan spindle: 12.000 rpm Daya terpasang: 7 kVA Tipe holder alat: BT30 Slot alat: 20 Pergerakan sumbu X: 500 mm Pergerakan sumbu Y: 350 mm Pergerakan sumbu Z: 350 mm Berat: 5.000 kg

Tahun pembuatan: 1990, Kondisi: belum diuji (bekas), Pressure: 125 tons (2x63) Lsdpjgy Hzpjfx Aaheta Stepless working speed: 0-10 mm/sec Return speed: 20 mm/sec Clamping width between columns: 950x550 mm Table surface from front: 950x820 mm Table surface with lateral insertion: 1220x550 mm Ram surface: see table dimensions Maximum installation height: 700 mm Stroke: 500 mm Weight: 5,500 kg Height: 2,900 mm Drive power: 18.5 kW 2 hydraulic cylinders with precision synchronous control Stepless electronic stroke limitation

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1986, Alcolor pembasahan Baldwing Ltedpfx Ajxyikieahoa CPC WEKO KONDISI SEMPURNA

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 124, translation-001 Ltedewl An Ijpfx Aahoa

Tahun pembuatan: 1963, Kondisi: bekas, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 512804, 1963 Bobst SP900E mit Doppel-Auswerfstation in angemessenem/gutem Zustand. Lodpfxstyqizj Aahsta Gut gewartet – in den letzten Jahren wurden z.B. Kettenräder, Hauptgreiferketten, Gegenplatte unter dem Schneidetisch, Kardan-Gelenke am Anlegerkopf erneuert (Original-Bobst-Teile). Die Greiferleisten wurden in jüngerer Zeit nicht ersetzt, sind aber noch in gutem Zustand. Die Kniehebel zeigen nahezu keine Verschleißspuren – sie wurden vermutlich einmal ersetzt und die Maschine seitdem nur wenig eingesetzt. Kaum Kratzer vorhanden. Die Maschine ist demontiert in unserem Lager im Süden der Niederlande, derzeit außer Betrieb und nicht angeschlossen. Für ernsthaft interessierte Käufer rüsten wir die Maschine auf, bauen sie zusammen und ermöglichen einen vollständigen Funktionstest nach Wunsch. In diesem Fall beträgt der Preis 22.000 Euro, verladen auf Ihr Transportmittel, EX WORKS.

Kondisi: bekas, Tahun pembuatan: 1992, translate-001 Ltodsfrvzvopfx Aahja