Pompa pengerasan Lisec untuk drum 20 liter

Lisec Catalyst pump 20 liter

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 265864, diameter pembubutan: 350 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan spindel (min.): 35 rpm, jarak pergerakan sumbu X: 195 mm, jarak gerak sumbu Z: 560 mm, daya motor spindle: 15 W, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan sumbu Z: 33 m/menit, torsi: 233 Nm, jarak dari tengah meja ke hidung spindel: 687 mm, Perlengkapan: dokumentasi / manual, Mazatrol Smart-Steuerung. Spindeldrehzahl: 5.000 min⁻¹. Verfahrweg X/Z: 195 mm / 560 mm. Ledpfx Alevfm H Aekshf Ausgestattet mit einem Spannfutter, Ø 215 mm. 3-Backen-Kraftspannfutter. 12-fach Revolver. Reitstock. Werkzeugvermessung. Teilefänger.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tahun perombakan terakhir: 2023, For sale: a complete and fully operational steel sheet roll forming line, suitable for processing coil materials such as Magnelis into any desired profiles, such as C-profiles commonly used in photovoltaic installations and farms, steel hall construction, shelters, as well as for furniture manufacturing, etc. Ledpfx Alou A U Utekshf The line, including an uncoiler, is installed in a heated hall under near-laboratory conditions. Prospective buyers can arrange for a test run prior to purchase. I have contacts to suppliers of profiling roll sets for specific profiles, as well as to companies specializing in machine upgrades and expansions. Further information strictly by phone only – I do not respond to written messages. A VAT invoice will be issued for the production line. Location: Poland, near the Ukrainian border (city: Krosno).

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical capabilities specified in the manual, on workpieces made of plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical work table allows for easy loading and unloading of workpieces, while minimizing the machine footprint to the necessary minimum. Tool changes are accomplished using a 10-position tool magazine mounted on the side of the unit, which enables a variety of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speeds (m/min): X = 30 Y = 30 Z = 15 Lhodpfemzbr Sjx Alksf Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp: ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Kondisi: bekas, Tahun pembuatan: 2015, Vertical CNC machining center with 3 controlled axes and an exceptional Y-axis machining capacity. Equipped with a vacuum-table clamping system that secures panels and sheets using vacuum pressure, this solution is especially efficient when processing thin components that are difficult to clamp with conventional systems. Ljdpfx Alev D A Imekehf The machining center features a set of valves allowing different table zones to be activated or deactivated, thereby focusing vacuum in a specific area and optimizing the clamping of small parts. Capable of interpolated milling and drilling operations on composite panels, aluminum, steel or titanium sheets, and aluminum profiles. Tekna provides user-friendly software, suitable both for experienced CNC programmers and users with less experience. The TKE 783 is a 3-axis machining center designed for interpolated drilling and milling on composite panels, aluminum, steel or titanium sheets, and aluminum profiles. Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Worktable dimensions: 2010 x 6300 mm Weight: 4842 kg Feed rates: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other details: Previously used for milling aluminum up to 4 mm thick. The machine is connected and can be seen in operation and tested in Estonia. It will be prepared for transport in April–May. If you have any additional questions, we will be happy to assist you.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool flying circle 93-125 mm) Working height: 100 - 200 mm (with tool flying circle 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindles: 1 Left spindles: 1 Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Including beveling unit Separate motor for each spindle Electronic feed including brake, steplessly adjustable 5-40 m/min Durofer pointed-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Ledpjrq Ebfefx Alkehf Control system: WEINIG MEMORY PLUS-SYSTEM CE marking Declaration of conformity

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Ketebalan kaca: 3 ÷ 40 mm Tinggi kerja minimum sabuk amplas: 50 mm Ukuran minimum benda kerja yang dapat diamplas: 70x70 mm Daya terpasang: 20 kW Tekanan minimum udara tekan: 6 bar Konsumsi maksimum udara tekan: 25 Nlt/menit Lhsdoxyv Rijpfx Alkef Panjang: 7043 mm Lebar: 1890 mm Tinggi: 2300 mm Beban konveyor: 200 kg/m Berat: 2800 kg Kecepatan pemrosesan: 0,5 ÷ 5 m/menit Kapasitas tangki air: 720 l Data teknis lebih lanjut dapat kami kirimkan secara elektronik.

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 4.428 h, de-maschine-003 Lhjdpjwnidhjfx Alkof

Kondisi: bekas, Tahun pembuatan: 2014, tinggi total: 2.400 mm, panjang total: 4.500 mm, lebar total: 2.200 mm, Empty weight: 2,500 kg CNC Machining Center Biesse Skill 12 24 G FT Year of manufacture: 2014 Machine no.: 60961 Tool holder: HSK F63 10x vertical drilling spindles 12 tool changer positions Software: BiesseWorks X-axis: 2,465 mm Y-axis: 1,260 mm Z-axis: 324 mm For transport, disassembled for standard trailer; 4,500 x 2,200 x 2,400 mm; Net weight: 2,000 kg - Special notes: - Note: The pallet with the white control cabinet does not belong to this machine - Year of manufacture: 2014 - Documentation available: Yes - CE certificate available: No - Serial number: 60961 - Number of milling spindles: 1 - Type of milling table: Flat table - Tool clamping system: HSK-F63 - Drilling tools included: Yes - Vertical drilling spindles: 10 - Tool changer positions: 12 - Control system/software: BiesseWorks - Safety feature: Safety fence - Vacuum pump included: Yes Lsdownhanjpfx Alkohf - Quantity: 1 - Manufacturer: Becker - Working area X [mm]: 2,465 - Working area Y [mm]: 1,260 - Working area Z [mm]: 324 - Transport dimensions: 4,500 mm x 2,200 mm x 2,400 mm (L x W x H) - Transport weight [kg]: 2,500 kg - Number of transport packages: 1 Financial information VAT: The stated price is plus VAT VAT/differential taxation: VAT deductible for entrepreneurs Delivery and trade-in possible at any time for all industrial equipment Glenn Smeets

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, tinggi kerja: 720 mm, Perlengkapan: dokumentasi / manual, Insulating glass production line without sealing robot Max. glass size: 2500 x 1600 mm Min. glass size: 250 x 180 mm Gas filling press: models and triple glazing possible Lhsdpfowikn Rsx Alksf

Kondisi: baru, Tahun pembuatan: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Lodpfx Aei Ar Ruslkehf Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Max. table load: 1,500 kg