Mesin deburring lembaran logam

LISSMAC SMW 123 RB

Kondisi: bekas, kedalaman tenggorokan: 610 mm, 12-peralatan-alat-otomatis Kekuatan penekanan (72 kN) dengan kedalaman 610 mm Kwodsxfi Npspfx Aglot Penukar alat bawah otomatis dengan 4 stasiun 2 konveyor Handal dan hemat energi melalui penggunaan sistem full-hidrolik Dilengkapi sistem keselamatan berpaten sebagai standar Kontrol canggih dengan layar sentuh dan pemantauan panjang penekan otomatis Dilengkapi dengan 2 * sistem pengumpan modular MAS-9 untuk Haeger 824OT (72 kN)

Kondisi: bekas, Pipe bending machine, mandrel bending machine, bending machine for tubes and profiles Pipe bending unit with SIEMENS servo motor and planetary gearbox Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Kwodpfod E A I Isx Aglot Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gearbox - 2-piece bending tool opens and closes by means of hydraulic lifting motion - MERKLE hydraulics - round block cylinder, type 014445, for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control unit - Without hydraulic power pack Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Removed from a fully functional special-purpose machine, tested prior to removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-handed configuration available. 5 units in left-handed configuration available. The stated price refers to 1 bending unit with servo motor. On request, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. Hydraulic power packs are also available.

Kondisi: baru, Airtower FT 20,000 model designation Kwsdpfx Aegvqzcjglst

Kondisi: baru, Tahun pembuatan: 2024, tekanan: 8 batang, Mitre adjustment horizontal 15°-90°-15°, infinitely variable. Saw motor 5.50 kW (400 Volt). Saw blade 600 mm. Fence travel range at the rear 180 mm. Working height adjustable from 940 to 1000 mm via adjustable feet. 2 extraction ports (top of hood and bottom). Net weight 600 kg. Dimensions WxDxH 135x140x150 cm. RAL 9007 Grey Aluminium. Turntable made of ground nickel steel. Saw head with recirculating ball guides, designed for high precision, durability, and rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed. Chip flow directed toward extraction hood. Equipment: • Precision under-table circular saw • Mitre angle adjustment 0º/45º/90º/-45º/-60º, stepless • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm Kwjdpfjgwt S Tex Agljt • Saw blade not included in delivery! Our NC pushing system ensures that your workpieces are positioned at the desired processing point on our UK 600 HA 90°. A gripper clamps the material, and the NC control automatically positions it. Afterwards, clamping and the sawing process are initiated. Positions are pre-programmed into the control system. Once the machine finishes the operation, it automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. You are welcome to visit and inspect the desired system at our production or demonstration hall at any time. Please feel free to contact us. Plantec Maschinen GmbH

Tahun pembuatan: 1972, Kondisi: bekas, nomor mesin/kendaraan: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram area: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 /min Drive motor: 380 V, 3 kW Ksdpob Tdquefx Agljwt Space requirement: 1700 x 1200 x 2500 mm Weight: 3.3 t

Kondisi: sangat baik (bekas), Coating and packaging line with thermoregulatable film, consisting of: a) Double conveyor belt (3000 mm x 1100 mm) for the application of corner protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Model Compact 250/6R with motorized conveyor belt - Total machine length (with motorized belt) approx. 7600 mm - Spool holder (6 upper spools, max. width 2450 mm + 6 lower spools, max. width 1450 mm) - Cutting and cross-sealing machine (2500 mm) - Max. usable height 700 mm Kwedpfx Agogp Diajlot - Installed power 12 kW - With automatic device for packaging lightweight parts (from 1 to 5 kg) via sealing bar c) Thermal shrink tunnel - Total length approx. 4700 mm (of which approx. 3700 mm is the tunnel) with hot air circulation (heating by electric resistances and fan), installed total power kW ? - Conveyor with metal bars (width approx. 1500 mm) - Max. usable height 700 mm - Adjustable feed speed from 4 to 20 m/min (approx.) d) ELME outfeed roller conveyor (idler rollers) for cooling (from approx. 3000 x 1500 mm)

Tahun pembuatan: 2021, Kondisi: baru, - 4 rolls - Capacity 1570 x 9 - Hardened rollers - Top roller diameter: 200 mm - Bottom roller diameter: 200 mm - Side roller diameter: 180 mm - Hydraulic system - Digital display for left roller movement - Digital display for central lower roller movement - Digital display for right roller movement - Top roller hydraulically foldable Kwsdpfsgg N R Hex Aglot - Steel construction ST-52 - Hydraulic drop-end for easy roller positioning - Hydraulic up and down movement system with central and side rollers - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

Kondisi: baru, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiusverschil ----- 50/230 Buigsnelheid/herhaalbaarheid ----- 230º/s. ±0,05° Dorne-lengte ----- 1 000–∞ Gewicht ----- 5000 kg Machinedimensies ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1800 mm/sec Tolerantiegraad ----- 0,05°/mm Standaardcomponenten volgens VDMA-, ISO- en DIN-normen OPTIES * Online verbinding met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij Kwodpfx Agega T E Ajlet programmeerbare robot of laadarm * Lasnaadherkenning en buispositionering, elektromagnetisch of optisch * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van de bedlengte

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.100 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, panjang total: 2.210 mm, lebar total: 1.530 mm, tinggi total: 1.940 mm, berat keseluruhan: 1.200 kg, tegangan masuk: 400 V, tinggi benda kerja (maks.): 50 mm, daya: 6 kW (8,16 hp), arus masuk: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100mm working width. The DM1100 C performs edge rounding and removes sharp edges from both the outer and inner contours of stainless steel, steel, or aluminum parts that have been cut on a laser, shear, or punching machine. This machine processes parts of various dimensions, including products from a size of 50x50mm. The DM1100 C is equipped with a station featuring double cross belts for edge rounding, leaving clean, smooth, and burr-free edges on all parts. DM1100 C Working capacity (mm): 1100x50 Number of cross-belt stations: 1 Cross-belt speed (m/s): 2-8 Feed speed (m/s): 0.6-3.2 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Current consumption (A): 18 Kwedpfx Agjtzfntoljt Dust extraction connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Weight (kg): 1200

Kondisi: diremajakan ulang (bekas), Fungsionalitas: fungsi terbatas, Tahun pembuatan: 2003, jam operasional: 24.000 h, Diameter pipa (maks.): 100 mm, Panjang pipa (maks.): 4.100 mm, Sudut pembengkokan (maks.): 183 °, radius pembengkokan (maks.): 300 mm, ketebalan dinding: 8 mm, de-Transfluid DB 2090 DB CNC Dornbiegemaschine für Rohre. Hochwertige deutsche Maschine in exzellentem Zustand, die Haupt-Hydraulikpumpen wurden komplett generalüberholt und der Hauptkopf vollständig instand gesetzt. Es muss lediglich ein neuer Encoder installiert werden, dann ist die Maschine betriebsbereit. Ausstattung: - Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D - Vorzeitiger Dornrückzug - Vollautomatische Einstellung der Spannbacken und Mitnehmer - Verstärkter Mitnehmer für enge Radien bei dünnwandigen Rohren - Lange Aufspannlänge mit 4000 mm Überdorn Im Lieferumfang ist umfangreiches Werkzeug im Wert von über 150.000 AUD enthalten: - 101,6 mm - 152 mm CLR - 101,6 mm - 200 mm CLR - 76,2 mm - 114 mm CLR - 76,2 mm - 200 mm CLR - 76,2 mm - 238 mm CLR - 63,5 mm - 96 mm CLR - 57,2 mm - 86 mm CLR - 50,8 mm - 76 mm CLR - 44,5 mm - 67 mm CLR - 40 x 40 mm - 120 mm CLR - 50 x 50 mm - 150 mm CLR - 60,3 mm - 150 mm CLR - 48,3 mm - 120 mm CLR Kwodpfxstrd T Tj Agljt