Decoiler decoiler decoiler decoiler

LIV 2x2 t (2045)

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Ljdpfskvnumex Aahehr Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: bekas, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed for manufacturing door and wall panels up to 610 mm wide, with an annual capacity of 1,500,000 m of panels per year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum coil weight: 10 tons Maximum coil outer diameter: 1,400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum producible panel thickness: 80 mm Power supply: 400 V Frequency: 50Hz SUPPLY SCOPE 1. Upper sheet processing section - 10 T upper decoiler with coil car - Rollers and pinch roll - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Press for decorative patterns - Upper forming machine with rollers (12 stands) - Upper forming steel frame - Upper sheet guide 2. Lower sheet processing section - Double lower decoiler 10 T with coil car - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roll forming machine (12 stands) - Roller conveyor Ledevtpcijpfx Aahjhr - Operator’s entry desk 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double-belt conveyor press - Double-belt heating system - Double-belt press - Roller output conveyor - Cutting saw - Soundproof cabin - Dust extraction unit - Operator control station 4. Stacking section - Automatic panel tilting unit - Stacking conveyor - Discharge conveyor - Packing section - Polystyrene spacer feeding system - Entry conveyor - Wrapping machine - Discharge conveyor - Packing machine 5. Panel production tools - Upper roll forming tools - Lower roll forming tools 6. List of additional machinery - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m / min Thickness: 40-80 mm Maximum coil weight: 10 Tons Maximum coil outer diameter: 1,400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum producible panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Kondisi: bekas, eccentric-press-automat-haulick-roos-type-rvd-125-double-column- eccentric-press-serial-no-212560-year-1981-pressing-force-125-ton s-table-size-880-x-800-mm-table-opening-470-x-140-mm-frame-width- 900-mm-side-frame-width-415-mm-ram-stroke-45-mm-ram-adjustment-ra nge-0-80-mm-installation-height-as-shown-340-mm-strokes-per-minut e-50-to-300-main-drive-motor-power-22-kw-power-supply-380-volt-50 -hz-double-connecting-rod-drive-mechanism-with-4-fold-mounted-ecc entric-shaft-for-off-center-ram-load-side-mounted-control-cabinet -nc-roll-feeder-ebu-width-250-mm-year-2003-standalone-control-pan el-for-roll-feeder-strip-feed-direction-left-to-right-space-requi rements-press-l-x-w-x-h-3000-x-2000-x-3020-mm-transport-height-29 50-mm-weight-of-press-approx-11-tons Lhodpohlnzkefx Aahjr

Kondisi: bekas, Tahun pembuatan: 1977, Pressure: 250 t Stroke: 40 - 190 mm Ledpovuuaiefx Aahshr Strokes per minute: 40 /min Throat depth: 500 mm Clearance between side frames: 1,050 mm Shut height: 615 mm Table dimensions: 1,380 x 880 mm Pass-through opening in table: 450 mm Table height above floor: 800 mm Ram area: 1,200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Space requirement (L x W x H): approx. 2.0 x 2.5 x 3.95 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Equipped with: motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand operation

Kondisi: baru, gaya penekanan: 100 t, panjang langkah: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm - Cylinder is movable Lsdpjgp Dc Rofx Aahshr - Electrically or manually operated - Pressure gauge - Emergency stop - 400V

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, nomor mesin/kendaraan: 06 61 218, EN-Lg32821-2024-1 Ledpeg U Utvsfx Aahshr

Kondisi: bekas, Double-column eccentric stamping press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine No. 88151005 Year of manufacture 1988 / 92 Pressing force: 160 tons Frame width: 970 mm Frame width lateral: 560 mm Table size: 900 x 900 mm Ram surface: 900 x 700 mm Tool installation height: 560 mm, max. 700 mm Stroke adjustment: 8–160 mm Ram adjustment travel: 125 mm Strokes: 25 to 70 strokes/min. Lsdpfx Aedzqlvjahshr Strip width in roller feed: max. 400 mm Motor power: approx. 15 kW Mains connection: 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - Ram weight counterbalance cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Control cabinets for press and feed unit, mounted together on a platform adjacent to the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Width of the press without feed: 2100 mm Depth of the press with drive motor: 2300 mm Overall height of the press: 4150 mm Net weight of stamping press: approx. 18 tons For transport, the drive motor is dismantled and the machine is laid on its side. Included: NC roller feed-straightening machine ALBA Type GGVHY400 Unit Nos. 1405 and 1406, Order No. 910708 (Year of manufacture 1992) - Feed control ALBA PSS 300 - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross section max. 1200 mm² - Roller drive of the feed hydraulically controlled - Height-adjustable feed unit on press for adapting material entry height - Adjacent hydraulic unit - Drag straightener with hydraulic opening and closing Weight of complete system: approx. 24 tons Space required for transport: one mega trailer with 3 meter internal height and 13.6 meter loading length Good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, with soundproof cabin Lodpfoi An Ttsx Aahehr Table surface 1000x550 mm, ram surface 1000x450 mm

Kondisi: baru, Tahun pembuatan: 2025, Band width: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 strokes/min at full feed length Feed force: 90 N Ljdpfe Ea U Hsx Aahjhr Selectable with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Tahun pembuatan: 2009, Kondisi: bekas, Material width: 320 mm Material thickness: 8 mm Number of straightening rollers: 9 Material cross-section: 2000 mm² Ledsp U Uwispfx Aahjhr Machine weight: approx. 4.2 t Space requirement: approx. 2000x2000x2400 mm