Garis pembentuk gulungan

LLC Evolutioner Soffit panel roll forming line

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2015, jenis kontrol: Kontrol CNC, tingkat otomatisasi: semi-otomatis, jenis aktuasi: hidrolik, produsen pengendali: Biegemaster, lebar kerja: 6.400 mm, Perlengkapan: dokumentasi / manual, henti darurat, For sale is a Biegemaster XBEND 6.1,5 - Bending length: 6400 mm - Insertion depth: 1250 mm - Being replaced due to new equipment purchase - Year of manufacture: 2015 - The machine was operated in single-shift operation, always by the same 3 operators - Regular maintenance has been performed - Slight signs of wear are visible Lhsdowxmdyopfx Aahor - After purchase, the machine can be collected approximately 7 months later

Kondisi: baik (bekas), 17 straightening rollers, Ø 54 mm Strip width: max. 1,450 mm Lhedpfxsbifryo Aahor Strip thickness: max. 2.5 mm

Kondisi: baru, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangular 1250x600 mm Cutting range at 45 degrees: round 680 mm Cutting range at 45 degrees: square 600 mm Cutting range at 45 degrees: flat 870x600 mm Cutting range at 60 degrees: round 580/550 mm Cutting range at 60 degrees: square 530/450 mm Cutting range at 60 degrees: flat 550x450 mm Saw blade length: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 5.3 t Space requirement: approx. 5.75 x 4.2 x 2.75 m 2-column double miter bandsaw for fast cutting with pusher system P15. Optionally P30 Lhjdpfofg E Hnex Aahor Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to -60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved by the new "B&S positioning system". An intelligent NC control ensures smooth interaction between the linear encoder and the self-braking positioning motor, in combination with a reliable hydraulic brake via large radial center positioning. The worktable is supported by high-quality preloaded bearings, enabling very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Double-sided gripper positioning system The B&S pusher system, feeding and positioning system, is equipped with "double-sided opening gripper claws" which are hydraulically controlled. This guarantees secure gripping and transporting of materials and bundles that may deviate from the ideal shape. The pusher system is separately constructed and runs on ball-bearing linear guides, precision ground rack, and is driven by a frequency-controlled, robust geared motor.

Kondisi: siap digunakan (bekas), BESCHREIBUNG  EIGENSCHAFTEN MATERIAL  Spaltbänder – kaltgewalzt, verzinkt DICKE  0,4–2,5 mm BANDBREITE  500–1550 mm MAXIMALES COILGEWICHT ZUR VERARBEITUNG  16 t INNENDURCHMESSER COIL  480–520 mm, 580–620 mm, 740–800 mm AUSSENDURCHMESSER COIL  1600 mm INNENDURCHMESSER STREIFEN  508 mm TOLERANZ DER STREIFENBREITE  0,1 mm MINIMALE STREIFENBREITE  20 mm MAXIMALE STREIFENBREITE  1520 mm Anzahl der Streifen / Breite   0,4–1 mm   20 Streifen   1,01–2 mm   10 Streifen   2,01–2,5 mm   8 Streifen Lhodpfx Aevupmdjahor MINIMALER BESÄUMSCHNITT  8 mm (2×4 mm)

Kondisi: bekas, nomor mesin/kendaraan: 632/6, Pressure: 30 t Stroke rate: 100-600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double roll feed: left Adjustable stroke range: 16-40 mm Distance between columns: 330 x 300 mm Ledpocxxycjfx Aahohr Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in three-column design, air clutch, BRUDERER precision double roll feed on the left

Kondisi: bekas, Tahun pembuatan: 1995, Technical Details: Sheet width: 1500 mm Sheet thickness: 1 mm Control: Ducter 1500 Total power requirement: 2.0 kW Ljdsu Tp N Dspfx Aahehr CROSS-CUTTING LINE consisting of: Decoiler, Straightening Machine, and Shear Shear: - Cutting length: 1500 mm - Sheet thickness: approx. 1.0 mm - Operation via control panel and foot pedal - Manual / automatic operation - Table size: 1530 x 400 mm - Back gauge: Adjustment range 1300 mm - Dimensions (LxWxH): 1600 x 2.0 x 1350 mm Straightening Unit: - Frame opening: 1585 mm - Table size: 1700 x 700 mm with side stops, 1 fixed, 1 manually adjustable - 2 inlet rollers, free-running, Ø 50 x 1670 mm - Straightening rollers: 2 opposing traction rolls (2 top / 2 bottom), both driven, vertical adjustment 10 mm - Pass-through rollers: 3 upper idle rollers, manual vertical adjustment 8 mm, and 4 lower driven rollers, fixed - Dimensions (LxWxH): 1580 x 2050 x 1260 mm Decoiler: - Manual operation/ - Expansion: max. Ø 520 mm - Dimensions (LxWxH): 550 x 800 x 1550 mm The machine is equipped with a manual counter. Accessories: - 1 replacement blade (requires regrinding)

Kondisi: bekas, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed for manufacturing door and wall panels up to 610 mm wide, with an annual capacity of 1,500,000 m of panels per year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum coil weight: 10 tons Maximum coil outer diameter: 1,400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum producible panel thickness: 80 mm Power supply: 400 V Frequency: 50Hz SUPPLY SCOPE 1. Upper sheet processing section - 10 T upper decoiler with coil car - Rollers and pinch roll - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Press for decorative patterns - Upper forming machine with rollers (12 stands) - Upper forming steel frame - Upper sheet guide 2. Lower sheet processing section - Double lower decoiler 10 T with coil car - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roll forming machine (12 stands) - Roller conveyor - Operator’s entry desk 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double-belt conveyor press - Double-belt heating system - Double-belt press - Roller output conveyor - Cutting saw - Soundproof cabin - Dust extraction unit - Operator control station 4. Stacking section - Automatic panel tilting unit - Stacking conveyor - Discharge conveyor - Packing section Lhodpfxevtpcie Aahor - Polystyrene spacer feeding system - Entry conveyor - Wrapping machine - Discharge conveyor - Packing machine 5. Panel production tools - Upper roll forming tools - Lower roll forming tools 6. List of additional machinery - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m / min Thickness: 40-80 mm Maximum coil weight: 10 Tons Maximum coil outer diameter: 1,400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum producible panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Kondisi: baru, Tahun pembuatan: 2025, Sheet metal decoiler cantilever 500mm - Load capacity: 1,500 kg - Inner diameter: 480-530 mm - Mandrel with 4 expanding arms, ball-bearing mounted with disc brake - Maximum coil width: 500 mm Lodpfx Aajfvbxqehshr

Kondisi: baru, Tahun pembuatan: 2025, The drill-milling machine is suitable for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as thread tapping for bolts up to M12 mm, milling up to 80 mm width, and slotting up to 22 mm. It is also designed for cutting and face milling applications. The machine is available immediately from stock. Machine Features This machine can be used for drilling, reaming, enlarging holes up to 45/40 mm in cast iron, threading bolts up to M12 mm, milling up to 80 mm width, and slotting up to 22 mm. It is also suitable for cutting and face milling. Various accessories can be installed. HEAVY-DUTY STABLE CAST IRON BODY MILLING HEIGHT IS ADJUSTED ON THE SUPPORT, NOT THE COLUMN ROBUST CROSS TABLE FOR MILL/DRILL WITH PRECISION-GROUND WORKING SURFACE DOVETAIL GUIDES QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT SPINDLE ROTATION SWIVEL HEAD +/- 90 DEGREES ADJUSTABLE HEAD HEIGHT Machine base available as an optional extra – €200 Lhsdpfx Aasud H Hushor Technical Data MAX. DRILLING CAPACITY: 45 mm MAX. FACE MILLING CAPACITY: 80 mm MAX. CYLINDRICAL-END MILLING: 28 mm MAX. THREAD TAPPING: 12 mm SPINDLE TRAVEL: 120 mm SPINDLE TAPER: MT4 SPINDLE SPEEDS (6-STAGE MOTOR WITH 1400rpm): 95, 170, 280, 540, 960, 1600 min-1 MAX. DISTANCE SPINDLE TO TABLE: 475 mm DISTANCE SPINDLE TO COLUMN FACE: 260 mm WORKTABLE DIMENSIONS: 820 x 240 mm TABLE TRAVEL: 550 x 170 mm MOTOR: 1.1 kW / 1.5 HP VOLTAGE (two options): 400V (three-phase motor) PACKAGING DIMENSIONS: 1140 x 800 x 1040 mm NET WEIGHT: 270 kg Available Equipment MK4/B18 drill chuck arbor Service tools 3-16 mm/B18 drill chuck MK4/MK3 reducing sleeve MK3/MK2 reducing sleeve Operating manual in Polish

Kondisi: baru, Tahun pembuatan: 2023, de_DE Lodpek Iy Hmsfx Aahehr