Pelabel + pemindai

LOGOPAK LOGOMATIC 415 T + Scanner

The following and additional machines belonging to our shipping line can be found in our listings. If you are looking for a complete solution in this area, or if you require several components, please feel free to contact us and we will get back to you promptly.

Brief overview of the shipping line and the application of the offered item:
The shipping line was used for pallet shipping, i.e., cartons were erected (SOCO ATS 2300 + 2200) and sealed at the bottom to be packed on the main shipping line. The finished packages were then sealed on top by a case sealer (SOCO T-4200) and forwarded to a labeller (LOGOPAK LOGOMATIC 415-T). After the LOGOMATIC scanner verified the packages as error-free, they were passed on to the palletising robot (SOKO PRS-LRS-1218-H3) to produce a pallet packed according to our specifications/dimensions. In our video, you can see the entire shipping line in operation.

The item offered here is the LOGOPAK LOGOMATIC 415-T labeller (shown in the blue circle in the layout image).

Summary of all relevant technical data for the LOGOMATIC 415 T labelling system:
• Machine type: LOGOMATIC 415 T
• Print resolution: 300 dpi (12 dot)
• Cycle rate: Maximum 20 products per minute
• Operation: HMI (10-inch color LC display) in German
• Signal light: 3-color status indicator (red, blue, green) included
• Frame: Standard frame with stainless steel spindle feet (adjustable ±50 mm)
• Certification: CE-certified (EU)
• Mains voltage: 230V AC / 50 Hz (L,N,PE). Supply voltage must not vary by more than ±5% and must be free of interference.
• Power consumption: Max. approx. 1400 VA
• Power connections at installation site: 1x Schuko socket for the labeller and 1x Schuko socket for maintenance purposes
• Compressed air: 6 bar, dry and oil-free. The air supply must be permanently installed up to approx. 1 meter before the device.
• Compressed air consumption: Approx. 250 l/min
• Compressed air connection: ½ inch fixed line with FESTO quick coupling KD4-½-A and coupling plug KS4-CK-6
• Temperature: The ambient temperature for the labeller should be between +5°C and +37°C. For processing PE labels, a temperature of 25°C is recommended.
• Applicator stroke length (net): 350 mm, which defines the working range for various carton heights
• Labelling height: 800 mm (standard setting)
• Orientation: Horizontal for top labelling
• Label unwinding/carrier take-up: For rolls up to 600 m running length
Bjdpfx Aexdcv Hjh Uelp
• Label core adapter: 152 mm (6 inch)
• Current format (Amazon): 60 mm width x 40 mm height
• Future shipping label: Approx. 100 mm width x 200 mm height.
Variations within these dimensions are possible depending on the required label size.
• Label gap: 8 mm
• Printing method: Thermal transfer
• Label material: Paper labels (Economy TT paper)
• Ribbon (TTR): Wax quality
• Interface: Ethernet (10/100 Mbit). A serial RS-232C interface is also available.
• Data protocol: ZPL (Zebra)
• Data source: Host system
• Data transmission: The print data is sent from a PC to the labeller via Ethernet.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.