M&R Radicure textile printing dryer

M&R ---- M & R Radicure D Trockner Elektrisch

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: div., 20240613-01 Dwjdewpww Eopfx Agqsd

Kondisi: baik (bekas), Tahun pembuatan: 2016, jam operasional: 1.200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 90-0122-DDI-IR-INTE, tegangan masuk: 415 V, panjang total: 3.000 mm, lebar total: 1.000 mm, tinggi total: 1.000 mm, jenis arus masuk: tiga fasa, tahun perombakan terakhir: 2026, lebar sabuk konveyor: 800 mm, UV Tunnel Natgraph – year of manufacture 2016 For sale: Natgraph UV curing tunnel, designed for use with screen printing machines. Manufactured in 2016, the unit is in excellent technical condition. The tunnel is currently in production and is operating without any issues. Key features: - IR pre-heating section - 2 UV lamps with precise and independent control for each lamp - Integrated cooling section to reduce the temperature of sheets after curing - Automatic stacker for aligning sheets into a neat pile - Can be integrated with a screen printing machine - Lowerable table for improved operator access to the printing machine The tunnel is used for curing UV inks in the screen printing process. Sheets are passed through the IR section and then the UV lamp section, where the ink is rapidly and evenly cured. Afterwards, the sheets go through the cooling section and are automatically stacked by the stacker. It is possible to connect the tunnel with a printing machine, ensuring stable curing quality and high production efficiency. Condition of the unit: year of manufacture: 2016 technical condition: very good the unit is in continuous production use regularly serviced Set includes: Natgraph UV curing tunnel Dsdpfeyuztgox Agqjwd IR section 2 UV lamps cooling section automatic sheet stacker ✔ Machine ready for operation ✔ Can be inspected during production

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, jenis arus masuk: AC (pendingin udara), lebar produk (maks.): 400 mm, tegangan masuk: 230 V, Minipack Pratika 80 MPS Minipack Pratika 80 MPS adalah mesin pengemas seal samping otomatis penuh. Didesain untuk produk dengan tinggi maksimal 360 mm dan juga cocok untuk produk yang sangat panjang. – Mesin pengemas seal samping otomatis penuh (seal samping kontinu) Dedpfxoyant Rs Agqewd – Tinggi produk maksimal: 360 mm – Panjang produk di atas 2 m dimungkinkan – Ukuran efektif bar penyegel: 700 mm – Maks. ukuran roll film: Ø 350 × 800 mm – Tinggi belt masuk: 915 mm – Dimensi mesin (tertutup): 2.785 × 940 × 1.770 mm – Dimensi mesin (terbuka): 2.785 × 940 × 2.280 mm – Produksi: hingga 3.000 kemasan/jam (tergantung produk/film)

Kondisi: baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AN-No.: 88.04.017 D, 8 units of very clean (refurbished) Jakob Müller Frick AG looms, model NF42, from 1988, 1989, and 1990 available from my stock. All machines are in excellent working condition and have been completely overhauled (100% fully functional). Features: - 12 shafts, without rack, with Mütrans, some with Müdata Offered machines: 1 unit NF 2/84mm from 1989 for €6,900 - Serial No.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm, overhauled, from 1990 at €6,500 each - Serial Nos.: 90.01.704 B; 90.01.755 A; 90.01.229 A Djder Ix Igopfx Agqjwd 1 unit NF 2/84mm, overhauled, from 1989 for €6,500 - Serial No.: 89.00.118 D 3 units NF 2/84mm, overhauled, from 1988 at €6,500 each - Serial Nos.: 88.04.244 A; 88.02.758 A; 88.02.758 B Background and Technical Details: - The machines originate from curtain tape production and were originally equipped with Z compartments. These have been converted to standard compartments as part of the general overhaul. - All tension beams and pressure rollers have been newly vulcanized by Westland. - The chain box card rollers are new or newly vulcanized. - Central lubrication in the chain box has been optimized. - All machines have a free first shaft (to accommodate heavier reeds) and are fitted with 12 shafts. - All come equipped with Mütrans II. Options: - Individual machines can be supplied with double-belt take-off for heavy fabrics (possible for 4–5 machines). - Option to equip with finely knurled tension beams (possible for 4–5 machines). - All needle holders are suitable for double needles; two additional Mütrans II units can be installed on request. Reconditioning: - The machines have been fully refurbished, with all bearings, shafts, and bushings checked and replaced as needed. - All swing arms were checked and replaced if necessary: 1st shaft – free (spacer block installed) 2nd/3rd shafts – swing arm 201 4th–6th shafts – swing arm 202 7th–9th shafts – swing arm 203 10th–12th shafts – swing arm 204 13th shaft – swing arm 205 - All shaft springs checked and replaced if necessary; no porous, cracked, or defective parts. - Electrical systems and thread monitoring boards have been tested and repaired or replaced as needed. - Machines painted in RAL 6021 Müller pale green. - All panels clean and free of damage. - Machines are supplied without Müdata. - 4 machines come with crawler gear. - All machines have been set up and test run. Scope of Supply: - Machines are delivered without oil, warp yarns, slats, reeds, needles, or chain links. - Delivery on Euro pallet, FOB Wuppertal.

Tahun pembuatan: 2006, Kondisi: bekas, Submerged arc welding unit, welding accessories, forming gas welding system, longitudinal travel carriage, chassis, welding carriage, longitudinal travel carriage, welding tractor, welding carriage, shielding gas welding unit, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, Rail Runner -Submerged arc welding unit: without power source -Submerged arc welding unit type: Minisaf 02 -Control box SUBARC 3 Dwedpfx Ajd Nlf Negqed -Intermediate hose package -Accessories -Dimensions: 1200/800/H500 mm -Weight: 215 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, lebar total: 6.370 mm, panjang total: 2.150 mm, tinggi total: 2.300 mm, berat keseluruhan: 4.800 kg, Printer sabuk lengket 340cm dilengkapi dengan 8 printhead Kyocera BARU, kondisi printer seperti baru. Dalam status operasional. Djdoxvb Ufjpfx Agqowd

Kondisi: bekas, de-hu-01 Dsdpfx Agsyuqideqewd

Kondisi: baru, Tahun pembuatan: 2025, Laser power: 6000 watts Round tube: 20 - 350 mm Square tube: 20 x 20 - 350 x 350 mm Rectangular tube: 20 x 20 - 350 x 350 mm Max. positioning accuracy X, Y axis: 0.05/1000 mm Dwsdjxgc Aropfx Agqed Max. positioning accuracy U axis: 0.05/1000 mm Max. mild steel thickness: 14 mm Max. stainless steel thickness: 10 mm Max. aluminium thickness: 10 mm Max. pipe weight: 1200 kg Length: 17,296 mm Width: 4,271 mm Height: 2,933 mm Standard Equipment Working area for tube diameter: - Round tube: 20 mm - 350 mm - Square tube: 20 - 350 mm - Rectangular tube: 20 x 20 mm - 350 x 350 mm Minimum clamping tube thickness: ≥1 mm Y-axis travel: 9,100 mm Z-axis travel: 4,000 mm X-axis travel: 400 mm Maximum loading length: 9,200 mm Maximum unloading length: 6,000 mm X, Y axis positioning accuracy: +/-0.05 mm/1000 mm X, Y axis repeatability: +/-0.05 mm/1000 mm Maximum positioning speed of rotary U axis: 100 RPM Maximum acceleration X/Y axis: 1.0 G Idle speed X-axis: ≤50 m/min Maximum loading capacity per tube: ≤133 kg/m Operating temperature of the machine tool: 20°C-40°C

Kondisi: bekas, Tahun pembuatan: 1995, Mesin Penggerindaan Datar Produsen: Jung Tipe: JA 500 CNC-C Tahun Pembuatan: 1995 Direkondisi pada: 2003 Panjang Penggerindaan: 500 mm Lebar Penggerindaan: 200 mm Tinggi Benda Kerja maks.: 250 mm Dimensi Meja X/Y: 600 mm / 200 mm Diameter Batu Gerinda: 225 mm Lebar Batu Gerinda: 25 mm Diameter Lubang Batu Gerinda: 51 mm Kecepatan Putaran: 4.200 RPM Dwodpswp E Rgjfx Agqed Berat Mesin: sekitar 2.500 kg 31126

Kondisi: siap digunakan (bekas), A flatbed printing press by Eickmeyer with a parallel-lifting upper frame is available. Print area X/Y: 500mm/800mm; maximum screen frame dimensions X/Y/Z: 1050mm/520mm/30mm; maximum workpiece height: approx. 140mm; operating hours: approx. 50h. Documentation available. On-site inspection possible. Dwjdpfxjvuadto Agqod