Kontainer roll-off

CONTAINER SCARRABILE NUOVO CENTINATO CON ALZA E A

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2013, Press container, 20 cbm usable volume for roll-off tippers Aventek RM20 Year of manufacture: 2013 Multiple units available Refurbished, inspected, serviced Large feed opening Split lid, opens left/right Pick-up from both sides Kjdpfswifivjx Aayjdw Side-hinged discharge door Ramp operation possible The machines are refurbished, inspected, serviced, and repainted in the RAL standard color of your choice. We are happy to provide an offer including delivery.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 1.851 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 500 kg, berat keseluruhan: 17.000 kg, kapasitas tangki oli: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Pressing force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific pressing force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 22 kW Total installed power: 65 kW Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³ approx. 5.5 t/h - 50 kg/m³ approx. 7.5 t/h - 100 kg/m³ approx. 9.7 t/h Bale weights with a bale length of approx. 1.2 m: up to 500 kg (material dependent) PLC control: Siemens S7-1500 Operator panel: Schneider Harmony Baler dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for processing loose bulk materials of small grain size - OptiCut XS system for reduced cutting force and increased throughput - Special press ram for compacting "difficult" materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Drive power: 4.0 kW Kedpfju Thbxox Aayedw Belt speed: approx. 0.3 m/s Feed belt length: 2,679 mm Inclined belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height (inclined belt): 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN quality N) Total height: 4,515 mm Transport dimensions (overall): 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling line: The entire plant is in very good condition due to its low operating time of only 1,851 pump hours and processing exclusively paper, cardboard, and film. Scope of delivery: - Avermann baler, model AVOS 1410 BS-22/50, incl. wire threading stations and bale chute - Avermann conveyor, model KGF GB 1500 - BOREMA personnel protection system, model APSS iBOR 22 Remarks: Complete documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.

Kondisi: baik (bekas), Tahun pembuatan: 2023, Mobile transformer substation for temporary power supply of construction sites, buildings, etc. - 22kV/0.4kV 630kVA. Sheet metal enclosed frame - kiosk design. High voltage switchgear with fused circuit breaker for transformer protection, oil-immersed transformer 630kVA, low voltage distribution board - 1000A incoming supply, outgoing feeder with fused disconnect switches, indirect submetering. The containerized enclosure is hook-lift compatible (suitable for hook-lift trucks). HV and LV cable entries are located laterally via flanges. Power and voltage can be customized – scalable solution. Kedpeuau Irefx Aaysdw

Tahun pembuatan: 1979, Kondisi: baik (bekas), 1 x 90 m³ aluminium silo with long base ring and filter housing, ø 3,000 mm Designed for a specific weight of 0.6 kg/dm³ (formerly used as a flour and starch silo) Manufacturer: Zeppelin Capacity: approx. 90,000 ltr Diameter: approx. 3,000 mm Total height: approx. 15,950 mm + 1,200 mm railing Weight: approx. 4,000 kg Specific weight: 0.6 kg/dm³ Material: Aluminium: AlMg3 Food grade: Yes Insulation: approx. 100 mm mineral wool with bolted cladding sheet (cladding partially damaged, can be repaired by us). Kdjdpsgig D Djfx Aayjw Connections and fittings: On the silo roof: - 1 x roof edge railing (ø 1,800 x 1,200 mm) with two access openings - 1 x hinged dome with protective grid DN 600 - 1 x access ladder to filter housing - 2 x crane lugs In the filter housing: - 1 x flange DN 100 for filling pipe - 4 x vent openings DN 600 with filter bag - 3 x connections for control / measurement equipment On the shell: - 1 x ventilation grid (filter housing) - 1 x filling pipe - 1 x access door (approx. 1,850 x 800 mm) The silo ends in a 60° cone NW 1500 with inspection opening. The cone is equipped with a fluidizing bed (compressed air) and a rotary valve. The silo is not fitted with rupture discs or explosion protection devices. For further information: see technical drawing and images.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Dijual Mesin Bubut TOS SUI 50 - 1500 Bekas dengan Banyak Aksesori Menawarkan mesin bubut TOS SUI 50 - 1500 yang kokoh dan presisi – ideal untuk bengkel, pengolahan logam, dan penghobi berpengalaman. 🔹 Jarak antara senter: 1500 mm 🔹 Diameter putar di atas alas: 500 mm 🔹 Kecepatan spindle: 14 – 2240 rpm 🔹 L. lubang spindel: 56 mm 🔹 Dimensi (P×L×T): 3000 x 1300 x 1500 mm Kedpfx Aajwu Dn Ioysdw 🔹 Berat: sekitar 2,9 ton ✅ Mesin bekas, namun dalam kondisi teknis yang baik dan siap pakai. 📍 Lokasi: Werdau 📅 Inspeksi bisa dilakukan – silakan buat janji! Jika berminat silakan hubungi melalui pesan atau telepon.

Kondisi: siap digunakan (bekas), Forklift truck Manufacturer: Jumbo Model: J60 DC12 Diesel Year of manufacture: 1994 Load capacity: 6,000 kg Own weight: 9,260 kg Lifting height: 4,300 mm Approx. 25,000 operating hours Sale due to switch to wheel loader All service and lubrication intervals have been carried out as documented in the inspection logbook! All filters (hydraulic, fuel, torque converter, air) have been replaced annually. Engine oil filter and oil changed every 250 operating hours. Only B0 diesel fuel used (no B7). Available immediately – fully functional Location: Austria, near St. Pölten Kdedpovtwuajfx Aayjw

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, Tangki penghubung 30-32 m³ untuk kompresor sekrup, tersedia pilihan kanan atau kiri. Tangki penghubung bekas, berfungsi dengan baik mulai dari 4.000 € tergantung kondisi, belum termasuk PPN. Pengiriman tersedia. Kodogypd Hjpfx Aayedw

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: Kdjdev Szwcepfx Aaysw Power rating: 630 kVA Primary voltage: 20 kV Secondary voltage: 400 V Frequency: 50 Hz Voltage: 400 V / Hz Rated current: 18.2/24.2 A Weight: 2.6 t per unit Dimensions (L x W x H): 1.7 x 0.82 x 1.66 m DRY-TYPE TRANSFORMER – mounted on U-beam base frame Two transformers available for sale. Both come with an enclosure (currently disassembled, see photo). No. 1 No. 2

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), Connected load: 15.5 kW, weight: 6.8 t. Kdjdpfsip D Rzox Aayjw

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The BTS-MF200MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into bales of up to 200 kg. Different materials can be collected in two or more adjacent pressing chambers; once a chamber is full, the movable press head is rolled over and the material is compacted. By compressing these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and return the material to the recycling loop in a proper manner. Pressing force: 16 tonnes Bale weight: up to 200 kg (depending on material) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine dimensions: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Feed opening: 1100 W x 800 H mm Pressing time: 34 seconds Motor: 2.2 kW / 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy removal Retainer claws to reduce material spring-back Short handling times as one chamber always remains available for loading Strapping band holder A quality product 'Made in Europe' Suitable for compacting: Cardboard Film Big Bags Clothing Kdjdpfsvugz Eox Aayow Light packaging materials Additional options: Annual maintenance with UVV inspection Machine color per RAL PLC control with automatic press cycle, bale-ready indicator and E-stop with key Additional press chambers (up to 6 total) Strapping bands Power supply 380 - 400 V (3 phases) Double-chamber baler, baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, waste compactor, recycling press, refuse compactor, waste press, residual waste press