Wadah agitator 15 m³ terbuat dari stainless steel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Trafo distribusi kering kering, 3 unit, 2000kVA, produsen SGB Jerman, rasio tegangan 22000 (± 2 x 2,5 %) /400V, Dyn1, IP31 atau IP00, Al/Al, unit evaluasi suhu, berfungsi, kondisi fungsional. Lodpfxelpd Tcs Aahjak

Kondisi: bekas, Tahun pembuatan: 2000, mkp01 Ljdpfx Aou Idffjahsak

Kondisi: bekas, System: Inclined Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on medium Design: Robust, high-performance construction Material: Stainless steel on container frame, 30' container, scraper plates in PP (polypropylene) Dimensions (LxWxH): 7580 x 2435 x 3000 mm Weight: approx. 8,000 kg Ljdpfx Asppyhteahoak Principle: Wastewater is fed into the inlet of the inclined clarifier and flows downward. Due to the arrangement of the lamella plates in the clarifier, the wastewater is redirected underneath the plates and flows upward through the lamellas. As a result, solids settle down onto the lamella plates. The clarified water is transported to the outlet. Solids on the lamella plates gradually slide down along the plates, where the sludge hopper is located. Rake Mechanism: Optionally, we offer the inclined clarifier with a rake mechanism to keep the sludge fluid. Application: Separation of solids and liquids by sedimentation. Inclined clarifiers are often used as a pre-stage before filter presses or decanters for thickening. Pre-thickening of thin sludge allows the filter press to be sized smaller in terms of filter area. The system is in good condition and available for rent or sale. Inspection at our plant is possible by appointment. We also offer new inclined clarifiers with a delivery time of approximately 8 to 10 weeks!

Kondisi: bekas, Tahun pembuatan: 2018, Plant: Decanter Type: Flottweg C4E-4/454 Complete Dewatering System in Container Year of Manufacture: 2018 Sludge Throughput: approx. 0–40 m³/h Solids Capacity: max. 1.2 t DS/h Features: Front double door, side access door, fan heater, lighting, power sockets, etc. Bowl: max. speed 3650 rpm Drum Diameter: 470 mm System: Containerized plant with swap body system for mounting subsequent system components. Fully piped and wired, operational as a functional unit. Container Design: Frame construction, clad with sandwich panels, mounting points for swap body transport systems. Accessories: FHM PolyMix 4000SP polymer preparation unit, measuring equipment, control panel. Feed Pump: Seepex BN 52-6LS Discharge Conveyor: Dual-trough screw conveyor SS D320 Dimensions: L 7820 mm x W 2500 mm x H 3880 mm Unladen Weight: 14,500 kg Operating Weight: 15,000 kg Voltage: 400 V Current Draw: 142 A Lsdeu R Icmspfx Aahoak Max. Power Consumption: 70 kW Fusing: 250 A Frequency: 50 Hz Sludge Inlet: DN 100 Centrate Outlet: DN 200 Solids Discharge: Screw conveyor Further Information: see photos

Tahun pembuatan: 1986, Kondisi: diremajakan ulang (bekas), Chamber filter press, fully refurbished with stainless steel lining, 82 polypropylene (food-grade) filter plates, 30 mm cake thickness, press volume approx. 1,100 liters, filtration area 96 m², fitted with new filter cloths, max. feed pressure up to 15 bar, closed outlet via 2 diagonal corner ports, automatic plate shifting and filter cloth washing system in stainless steel, high-pressure pump 100 bar, Manzini piston pump (MC-100 in stainless steel) for filling, with raised support frame (stainless steel), control cabinet Lsdpon Dw Nkofx Aahoak

Kondisi: bekas, jarak tempuh: 58.695 km, daya: 235 kW (319,51 hp), pendaftaran pertama: 01/1978, jenis bahan bakar: diesel, berat keseluruhan: 22.000 kg, konfigurasi gandar: 3 gandar, warna: hijau, tipe perpindahan gigi: mekanis, Tahun pembuatan: 1978, Perlengkapan: derek, penggerak semua roda,

Kondisi: baik (bekas), Spectro CIROS CCD water analysis device - Height: 105 cm - Width: 150 cm - Depth: 75 cm Good condition, fully functional, can be inspected and tested on site. International shipping available. Inspection: Please note that, to avoid misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before purchasing to avoid any ambiguities. For general inquiries or to arrange a viewing appointment, I am available at the phone number listed below at any time. Subject to prior sale and errors in description. VAT will be shown separately on my invoices. Lajdpfx Aajfiqn Ujhek Shipping via freight forwarding company.

Kondisi: bekas, Tahun pembuatan: 2019, 1 Ledjxf D Iaopfx Aahoak

Tahun pembuatan: 1997, Kondisi: diremajakan ulang (bekas), 2 pieces process design volute casing pumps 1 unit fully overhauled; pump and motor bearings replaced with new ones. Mechanical seal overhauled by specialist company. All gaskets replaced. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: Double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: Closed two-channel impeller Impeller diameter: 277 mm Bearing type: Rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: Oil Oil level monitoring for lubrication Materials: Lajdpfx Aoiuznueahsk Pump casing: Duplex stainless steel Noridur 1.4593 (9.4460) Wear plate: Duplex stainless steel Noridur 1.4593 (9.4460) Discharge cover: Duplex stainless steel Noridur 1.4593 (9.4460) Shaft: Tempered steel C45+N Impeller: Duplex stainless steel Noridur 1.4593 (9.4460) Bearing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex stainless steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Nominal pressure (suction): PN 10 Nominal pressure (discharge): PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Rated power (P2): 7.50 kW Insulation class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is particularly suitable for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology

Kondisi: sangat baik (bekas), Multiple underground 150 m³ steel storage tanks (firefighting water tanks) Capacity: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted according to DIN 14230 for use as underground firefighting water tanks: The tank features a firefighting water suction connection in accordance with DIN 14244, equipped with a permanently mounted A-type fire brigade coupling per DIN 14319, design type B, without dip tube. In addition, the tank is fitted with a ventilation flange/stub connection NW/DN 100 with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground level. - The tank is empty, cleaned, and has been factory-coated externally with bitumen. Lajdpfofnh Tgjx Aahsk - On request, we can supply the tank with a full internal bitumen-based lining (for corrosion protection) or an epoxy resin internal coating. Cost-effective delivery with our own truck is possible. Simply let us know your delivery location and you will promptly receive the exact freight charges. An inspection is possible at any time by prior appointment. If you need further information, feel free to call us or send us an email at b.barth (at) barth-tank.de